Professional Documents
Culture Documents
Quick Start Manual For The Lynx Skyline Module
Quick Start Manual For The Lynx Skyline Module
Options
1. Insert the modules in the SKYLINE frame as -Block entrance
seen in the image (the amplifier on top, the -General entrance
Lynx Display next to the amplifier and then
the remaining modules. (*) Only if TYPE=Block Entrance
2. Use the included cables to wire the system Indicate the block number, according to the
(see examples below). installation´s overall characteristics
Options
-Between 00 and 99
LYNX
AMPLIFICADOR - AMPLIFIER
AMPLIFICATEUR - VERSTÄRKER
MIC
Indicate if you want to disable the
PROG
TYPE:
ADDRESS:
alphanumeric keypad, if so you can call the
R
E
P
M
A
T
+AB-
DISPLAY READER KEYPAD
BOTTOM CONNECTORS PANEL
RESET FBOOT apartments via a search with the "arrow"
12 Vdc
+ -
RL1 RL2
C NO NC C NO NC BS - SP
keys.
MIC
AMPLIFICADOR - AMPLIFIER
LYNX AMPLIFICATEUR - VERSTÄRKER
+ - C NO NC C NO NC BS - S
FINGERPRINT
TYPE:
TAMPER CN5
PROG
CI95294-REV2-21506
VIDEO READER KEYPAD
ADDRESS:
CN7
CN1 AMP-VIDEO
MÓDULO DIRECTORIO LYNX
LYNXDISPLAY MODULE
MODULE AFFICHEUR LYNX
+ -
TAMPER
C NO NC
FINGERPRINT
CN5
C NO NC BS
CI95294-REV2-21506
- S
(*) Only if BLOCK# = Some blocks
LYNXNAMENSVERZEICHNISMODUL VIDEO
CN7
CN2 AMP-KEYPAD
CN3 KEYPAD
ADJ.
SENSOR
CN1 CN2
here, G. E.
CONNECTOR DESCRIPTION MÓDULO DIRECTORIO LYNX
CÓDIGO
CN3 LYNXDISPLAY MODULE
UP MODULE AFFICHEUR LYNX
CN1 AMP-VIDEO
VERSIÓN LYNXNAMENSVERZEICHNISMODUL
CN2 AMP-KEYPAD
CN3 KEYPAD
ADJ.
SENSOR
CN1
INPUT
CÓDIGO
MÓDULO TECLADO
CN3
VERSIÓN Use this option if you want to restore the
KEYPAD MODULE
UP
MODULE CLAVIER
TASTATURMODUL
panel to its programming factory settings.
CN1
CÓDIGO INPUT The panel will disconnect and reconnect
OUTPUT
CN2
automatically within 30 to 60 seconds
1SW2
2
MÓDULO TECLADO
KEYPAD MODULE
MODULE CLAVIER
TASTATURMODUL
with the IP 10.200.100.0 (General
OFF OFF Data /C lock UP
1 2 3 12
1
2
3
4
5
6
7
8
A 0 B 1 2 3
CN2 OUTPUT
4 5 6
CN3
KEYBOARD CN2
7 8 9
+ A 0 B
- PROXIMITY ACCESS CONTROL
Options
- Enabled
3.Enter the INSTALLER CODE. - Disabled
This code is 19025 by default. It allows you to add, edit and delete the
If it has been changed and you do not remember the new users’ filter list (if the option has been
code, you can restore the default value via the procedure enabled).
indicated in the Programming Manual for LYNX PANELS
Cod. 970020.
B FUNCTION RELATIVE
FUNCIÓN SEGUN TO THE PARAMETER
PARÁMETRO TO PROGRAM
A PROGRAMAR
Indicate the language of the screen
messages and voice synthesizer.
options
-Up to 31 different languages, with their
respective typographies.
Options
- 4 names per screen
- 1 name per screen
Use the "arrow" keys to move down the different
fields to set the current time and confirm with "B".
Indicate how you want the surrounding
temperature displayed on the screen (on
panels with this function.
Options
- Temperature ºC Select the desired date format.
- Temperature ºF
Relay Settings