Professional Documents
Culture Documents
Impression Materials
Impression Materials
د
5. Easy to manipulate.
1
2- The unguided method (digital devices). With a computer-
assisted three dimensional mandibular recording devices.
2
-In the single handed approach (chin
point guidance), the fingers exert
upward pressure. In this way, it is
more difficult to ensure that the
condyles are properly located,
Incorrect centric relation (CR) recording. A, If the mandible is forced backward (F), the
condyles are not in their most superior position but are moved backward and downward
(small arrow). B, Any restorations made on casts related with this CR record are in
supraclusion when tried in the mouth. C, Note the relationship of the anterior teeth.
3
Anterior Programming Device
1. Lucia jig
It is customized from cold cure acrylic resin adapted to the
maxillary central incisors. The patient’s mouth is guided into
closure and stopped when the posterior teeth are about 1 mm
apart. The completed device should allow free movement to
mand. Incisor on lateral and protrusive movement.
2. green stick wax
4
Materials used for Centric Relation Record
1. Reinforced Aluwax Record (pink base plate wax):
Apiece of wax is placed on the maxillary teeth and ask the patient to
close in centric relation then the wax is removed and placed in water
for cooling. Excess wax covering buccal and lingual teeth surfaces
should be cut with sharp blade. Then wax record should be put
between upper and lower casts & secured with elastic band until
mounting on the articulator is performed.
5
2. Bite registration paste (Anterior Programming
Device with Elastomeric silicone or ZOE Record).
1. An anterior programming device is
used to facilitate centric relation
recording.
2. Verify that no posterior contact
remains and that the only occlusal
contact is on the anterior
programming device.
3. Dispense and mix the elastomeric
material according to the
manufacturer’s instructions onto the
occlusal surface of the mandibular arch.(B)
4. Guide the patient’s mandible into hinge movement until the
mandible comes to rest on the anterior programming device.
5. Remove the record from the mouth and trim with the scalpel
blade.(C)
6
3. Bite rim or occlusal rim.
It used in the following cases: