The TRANS-485 module converts between RS-232 and RS-485 communication protocols, allowing up to 32 drops on the RS-485 side. It operates from 8 to 32V, consumes 240mA at 12V, and supports baud rates from 1200 to 38400. The module has 500V galvanic isolation, measures 110x87x33mm, and is rated for indoor use from 0 to 70 degrees Celsius.
The TRANS-485 module converts between RS-232 and RS-485 communication protocols, allowing up to 32 drops on the RS-485 side. It operates from 8 to 32V, consumes 240mA at 12V, and supports baud rates from 1200 to 38400. The module has 500V galvanic isolation, measures 110x87x33mm, and is rated for indoor use from 0 to 70 degrees Celsius.
The TRANS-485 module converts between RS-232 and RS-485 communication protocols, allowing up to 32 drops on the RS-485 side. It operates from 8 to 32V, consumes 240mA at 12V, and supports baud rates from 1200 to 38400. The module has 500V galvanic isolation, measures 110x87x33mm, and is rated for indoor use from 0 to 70 degrees Celsius.
Power Consumption : 240 mA @12V Z. Baud Rates : 1200, 2400, 4800, 9600, 19200 or 38400. Connector : RS-485 side: 3 way terminal block. Max. Number of Drops : 32. End of Line Terminator : 120 W. (selected via jumper) Galvanic Isolation : 500 V for 1 minute. Dimensions : 110 mm x 87 mm x 33 mm. (including connectors). Weight : Approximately 93 g. Environmental Rating : Standard, indoor at an altitude of less then 2000 meters with non-condensing humidity. Operating/Storage Temperature : 0°C to +70°C / -30°C to +80°C Operating/Storage Humidity : 90 % max. (non-condensing) Installation Over Volt. Category : II Appliances, portable equipment Pollution Degree : II, Normal office or workplace, non conductive pollution