Professional Documents
Culture Documents
Sensor/actuator Box - SACB-4/ 8-C SCO - 1516852: Key Commercial Data
Sensor/actuator Box - SACB-4/ 8-C SCO - 1516852: Key Commercial Data
com/pi/products/1516852
Your advantages
Safety in the field, thanks to molded housing and high degree of protection
Flexible, distributed bundling of signals in one master cable
Save space: distributor box with double occupancy for two sensors in one slot
Save time, thanks to installation with SPEEDCON fast locking system
Flexible: distributor box with connector hood for on-site assembly
GTIN
GTIN 4017918967581
Technical data
General
Rated voltage 120 V AC
120 V DC
Max. operating voltage Umax 135 V
Current carrying capacity per I/O signal 2A
Current carrying capacity per slot 4A
Total rated current 10 A
2x 8 A (For electrical isolation)
Number of positions 5
Number of slots 4
Flammability rating according to UL 94 V0
Sensor/actuator connection system M12-SPEEDCON-socket
07/16/2020 Page 1 / 14
https://www.phoenixcontact.com/pi/products/1516852
Ambient conditions
Degree of protection IP65
IP67
IP69K
Ambient temperature (operation) -30 °C ... 80 °C
Insulation material
Housing material PBT
Material of the moulding mass PUR
Contact material Cu alloy
Contact surface material gold-plated
Contact carrier material PA
Material of contact, master cable side CU alloy
Material of contact surface, master cable side Gold-plated
Material of the contact carrier on the master cable side PA 6.6 V0
Material of threaded sleeve Zinc die-cast
07/16/2020 Page 2 / 14
https://www.phoenixcontact.com/pi/products/1516852
Pin assignment
Slot/position = Wire color or connection 1 / 4 (A) = 1 / 4
1 / 2 (B) = 1 / 2
2 / 4 (A) = 2 / 4
2 / 2 (B) = 2 / 2
3 / 4 (A) = 3 / 4
3 / 2 (B) = 3 / 2
4 / 4 (A) = 4 / 4
4 / 2 (B) = 4 / 2
1-4 / 1 (+ 120 V) = UN
1-4 / 3 (0 V) = 0 V
1-4 / 5 (PE) = PE
Drawings
07/16/2020 Page 3 / 14
https://www.phoenixcontact.com/pi/products/1516852
Potential UN1 and UN2 bridged. Potential assignment: UN1 = UN2 = slots Electrically isolated. Potential assignment: UN1 = slots 1,3 and UN2 = slots
1,2,3,4. 2,4.
07/16/2020 Page 4 / 14
https://www.phoenixcontact.com/pi/products/1516852
07/16/2020 Page 5 / 14
https://www.phoenixcontact.com/pi/products/1516852
07/16/2020 Page 6 / 14
https://www.phoenixcontact.com/pi/products/1516852
Classifications
eCl@ss
07/16/2020 Page 7 / 14
https://www.phoenixcontact.com/pi/products/1516852
UNSPSC
Approvals
Approvals
Approvals
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976
Nominal voltage UN 120 V
Nominal current IN 3A
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976
Nominal voltage UN 120 V
07/16/2020 Page 8 / 14
https://www.phoenixcontact.com/pi/products/1516852
RU C-
EAC
DE.AI30.B.01102
EAC
EAC-Zulassung
RU C-
EAC
DE.BL08.B.00511
cULus Recognized
Accessories
Accessories
Cable by the meter
Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 11-pos., 8 x 0.50 mm²
and 3 x 1.00 mm², length: 50 m
Connector hood with an integrated connector, for M12 sensor/actuator boxes with metal thread and pluggable screw
connection, for 4, 6 or 8 slots
Device marking
07/16/2020 Page 9 / 14
https://www.phoenixcontact.com/pi/products/1516852
Snap-in markers, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK
CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snapped into marker carrier, lettering
field size: 17.5 x 9 mm, Number of individual labels: 20
Snap-in markers, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of
individual labels: 24
Snap-in markers, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped into marker carrier, lettering field size:
17.5 x 9 mm, Number of individual labels: 20
Snap-in markers, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of
individual labels: 24
Snap-in markers, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20
07/16/2020 Page 10 / 14
https://www.phoenixcontact.com/pi/products/1516852
UniCard sheet, for labeling devices from other manufacturers, for overview table see download area, labeled
according to customer specifications
Snap-in markers, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20
UniCard sheet, for labeling devices from other manufacturers, for overview table see download area, labeled
according to customer specifications
Screwdriver tools
07/16/2020 Page 11 / 14
https://www.phoenixcontact.com/pi/products/1516852
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl
diameter of 15 mm, for 4 mm hexagonal drive
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip
Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive
07/16/2020 Page 12 / 14
https://www.phoenixcontact.com/pi/products/1516852
Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 1 x 50 mm, hardened, suitable for holder according to DIN 3126-
F6.3/ISO 1173
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
Screwdriver - SF-BIT-SL 0,45X2,4-70 - 1212607
Screw bit, slotted, E6.3-1/4" drive, size: 0.45 x 2.4 x 70 mm, hardened, suitable for holder according to DIN 3126-
F6.3/ISO 1173
Screwdriver - SF-M BH - 1212070
Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable
for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic
Torque tool
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
07/16/2020 Page 13 / 14
https://www.phoenixcontact.com/pi/products/1516852
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector
hood
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 ‑ 3 Nm
07/16/2020 Page 14 / 14