Professional Documents
Culture Documents
Load Indicator With Angle/Length/ Radius/Tip Height/Anti-Twoblock
Load Indicator With Angle/Length/ Radius/Tip Height/Anti-Twoblock
Junction
Box
PAT
PAT
Anti-TwoBlock Limit
Switch–Corrosion
resistant, waterproof
Anti-TwoBlock Weight
Cable
Operator’s
Aid/Indicator
The EI65 indicator system was developed in response to
the needs of the crane owners who wish to improve the
efficiency and productivity of their operations. Its large LCD
continuously displays load, boom angle, length, radius and tip The operator’s console contains the warning light and horn,
height, along with hoist selection and parts of line. With this programmable controls, and LCD display. The large backlit
data and the crane’s working load chart, the operator has the display is designed for enhanced readability, even in difficult
information needed to make lifts within the crane’s operating lighting conditions.
limits. The system also includes an anti-two block warning. Simplicity of design allows the EI65 system to be quickly
The EI65, through its foil-front keypad, permits the operator to installed by an authorized distributor on all types and sizes
pre-set load capacity limits and geometric limits on boom of lattice or telescopic boom cranes. Installation and
length, angle, height, and operating radius. When any of the calibration can be completed in one or two days by your
limits is reached, the system warns the operator with an local authorized dealer.
audible alarm and a warning light. These features allow the The PAT EI65 meets SAE J375, J376 and Cal-OSHA
operator to operate the crane in areas of limited headroom or standards. It is fully upgradeable to LMI and is covered
proximity to buildings, electric transmission lines, etc. by a one-year warranty.
PAT AMERICA INC.
Overload Alarm Light - Red warning light “Tare” Button - Allows the operator to indicate net
goes on when the load limit set by the load – actual load less lifting tackle and block etc.
operator
is reached. Simultaneously, the audible
alarm sounds. “OK” Button - Used to confirm values and
data inputs.
Like all PAT products the EI65 was designed and built to
operate under rugged conditions. All parts are modular
and interchangeable. Should a malfunction occur repair is
fast and simple by PAT or your local stocking distributor.
The upgradeable EI65 is the latest in a full line of modular
crane monitoring instruments. Should your requirements Length
change the EI65 can be upgraded to a full LMI System EI65 Angle
using most of the EI65 components thereby reducing your Sensor
material cost and installation time.
PAT is an international company with sales & service
around the world. In addition to crane products PAT Anti-
SKM 300
manufactures scales for over road vehicles and computer Running Line TwoBlock
Tensiometer Switch
controlled form and roundness measuring systems for
research and development and for automated production
line quality control.
PAT's extensive technical background and years of
engineering experience is available to all our customers to
provide solutions for their technical applications. Force transducer
Trade-in: Ask your PAT distributor about special trade-in EI65 System Diagram
and upgrade programs. PAT
PRS 145 LMI PRS 75EZ Compu-Crane Rigging Pro Load Motion Alert
Displays actual/allowable Wireless Multi-sensor Graphically perform every Specify load parameters When the load starts
load, load radius, boom Indicator for mobile lift before you start the and hitch type and moving an audio alarm
angle and length. Allows cranes. Requires no hard job. Enter basic site Rigging Pro calculates sounds and the light
fast and accurate in-field wires or cable reels. information and Compu- the load center of gravity flashes warning
Crane creates site,
calibration through Provides accurate load and sling tensions and personnel. Portable and
selects crane and
operator’s graphic measurement. Warns of displays you rigging easy to install on any
configuration. Simulate
console. Features bright, impending two-block the lift, display all assembly in 3 dimension. suspended load.
backlit graphic display condition. obstructions, check
with integrated clearances, add details to
bargraph. job site.
www.patamerica.com
Your PAT Representative is: