Professional Documents
Culture Documents
W 24-2: Designed For Hostile Industrial Environments
W 24-2: Designed For Hostile Industrial Environments
W 24-2: Designed For Hostile Industrial Environments
Photoelectric
proximity switches, W 24-2: Designed for hostile
BGS
Photoelectric
reflex switches
industrial environments
Through-beam
photoelectric
switches
I
visible red light and, finally, the
different supply voltages (includ-
If the operating environment at ing two universal voltage versions
your plant is particularly hostile for AC and DC power supplies)
and wet, the W 24-2 series of are all proof of this.
photoelectric switches provides
the necessary degree of reliability Various device types – all with
in detection. A plethora of device UL- approval – are available. The
features makes this possible: WS/WE 24-2 through-beam pho-
■ Sturdy metal housing with en- toelectric switch is characterised
closure rating IP 67 (with Teflon by its enormous scanning range
coating if required), of up to 50 metres. Even the pho-
■ high insensitivity to ambient toelectric reflex switch, with a
light, scanning range of up to
■ scratch-resistant front screen 22 metres (on PL 80 A reflector)
cover made of plastic (also leaves most other devices way
available with a glass cover), behind. Finally the adjustable
■ front screen heating to prevent WT 24-2 photoelectric proximity
condensation under rapidly switch with background suppres-
changing ambient temperatures, sion: it provides large scanning
distances of 1,200 mm for the
red light version and 2,500 mm
for the infrared version.
m Used as muting
sensors, WT 24-2
photoelectric proximity
switches signal the
entry of an industrial
truck into a protected
zone and clock the
multibeam photo-
electric safety switch.
n Detection plus
identification:
WT 24-2 photoelec-
tric proximity switch-
es determine which
body panels are to
be placed on a
conveyor belt.
m Collision protection
in a fully automatic
welding system –
made possible thanks
to the insensitivity
to ambient light of
WT 24-2 photo-
electric proximity
switches.
Dimensional drawing
Scanning distance
100...1200 mm
14
Photoelectric proximity switches
7 14 17.5
6.5
10
■ Robust metal housing 1
■ Red light 2
■ Background suppression, with 3 4
very precise adjustment
87.5
5
■ M16 screw fixing rotatable by 90°
15
61
6
M5
■ Front lens heating and selectable
4.7
8
26
time delay, optional
max. 32
9
30 11.8
27 65
Adjustments possible 1 Alignment sight
WT 24-2B 250 WT 24-2B 240 2 LED signal strength indicator
WT 24-2V 250 WT 24-2B 440 3 Standard direction of the material
WT 24-2V 540 being scanned
4 Centre of optical axis, sender
2 2 5 Centre of optical axis, receiver
(close range)
6 Centre of optical axis, receiver
(far range)
1.0
10
6 mm deep
8 M5 threaded mounting hole,
H H through-hole
13 t2 11 11
D D
9 M16 screw fixing and plug
14 t1 NPN NPN rotatable by 90°
t1 t2
15 PNP PNP 10 Scanning distance adjustment
t0 12 12
t1 + t 2 11 Light/dark selector
12 NPN/PNP selector
13 Time control t2 = OFF-delay
14 Time control t1 = ON-delay
15 Time delay selector switch
Connection types
WT 24-2B 240 WT 24-2V 250 WT 24-2B 440 WT 24-2V 540
WT 24-2B 250
Supply voltage VS 10 . . . 30 V DC 2)
Residual ripple3) < 5 VSS
Current consumption 4) ≤ 50 mA
≤ 70 mA, front lens heating
–
Switching outputs PNP or NPN, Q or Q
Output current IA max. 100 mA
Response time 5) ≤ 500 µs
Max. switching frequency 6) 1000/s
Pre-failure signalling output Alarm, PNP
Time delay Adjustable, 0.5 . . .10 sec
4 2
3 Scanning distance on white 9)
90%/90%
2 3
0
(mm) 200 400 600 800 1000 1200 1400
Dimensional drawing
Scanning distance
100...1200 mm
14
Photoelectric proximity switches
7 14 17.5
6.5
■ Robust metal housing 10
1
■ Red light
2
■ Background suppression, with
3 4
very precise adjustment
87.5
■ M16 screw fixing rotatable by 90° 5
15
61
■ Front lens heating and selectable 6
M5
4.7
8
26
time delay, optional
max. 32
9
30 11.8
27 65
1.0
10
receiver (far range)
7 M5 threaded mounting hole,
H H 6 mm deep
12 t2 11 11
D D
8 M5 threaded mounting hole,
13 t1 through-hole
t1 t2
14 9 M16 screw fixing rotatable
t0
t1 + t 2 by 90°
10 Scanning distance adjustment
11 Light/dark selector
12 Time control t2 = OFF-delay
13 Time control t1 = ON-delay
14 Time delay selector switch
Connection type
WT 24-2R 240
WT 24-2R 250
3 50 1200 8
4 2
3 Scanning distance on white 8)
90%/90%
2 3
0
(mm) 200 400 600 800 1000 1200 1400
Dimensional drawing
Scanning distance
100...2500 mm
14
Photoelectric proximity switches
7 14 17.5
6.5
10
■ Robust metal housing 1
■ Infrared light 2
■ Background suppression, with 4
3
very precise adjustment
87.5
5
■ M16 screw fixing or equipment
15
61
6
plug rotatable by 90° M5
4.7
8
26
■ Front lens heating and selectable
max. 32
9
time delay, optional 30 11.8
27 65
Adjustments possible 1 Alignment sight
WT 24-2B 220 WT 24-2B 210 2 LED signal strength indicator
WT 24-2B 420 WT 24-2B 313 3 Standard direction of the material
WT 24-2V 220 WT 24-2B 410 being scanned
WT 24-2V 510 4 Centre of optical axis, sender
5 Centre of optical axis, receiver
2 2 (close range)
6 Centre of optical axis, receiver
(far range)
7 M5 threaded mounting hole,
1.0
10 6 mm deep
1.0
10
8 M5 threaded mounting hole,
through-hole
H H 9
13 t2 11 11 M16 screw fixing and plug
D D
rotatable by 90°
14 t1 NPN NPN 10 Scanning distance adjustment
t1 t2
15 PNP PNP 11 Light/dark selector
t0 12 12
t1 + t 2
12 NPN/PNP selector
13 Time control t2 = OFF-delay
14 Time control t1 = ON-delay
15 Time delay selector switch
Connection types
WT 24-2B 210 WT 24-2V 220 WT 24-2B 313 WT 24-2B 410 WT 24-2V 510
WT 24-2B 220 WT 24-2B 420
Technical data WT 24-2 B 210 B 220 B 313 B 410 B 420 V 220 V 510
Supply voltage VS 10 . . . 30 V DC 2)
Residual ripple3) < 5 VSS
Current consumption 4) ≤ 50 mA
≤ 70 mA, front lens heating
–
Switching outputs PNP or NPN, Q or Q
Output current IA max. 100 mA
Response time 5) ≤ 500 µs
Max. switching frequency 6) 1000/s
Pre-failure signalling output Alarm, PNP
Time delay Adjustable, 0.5 . . .10 sec
90%/90%
2
3
0
(mm) 500 1000 1500 2000 2500 3000
Dimensional drawing
Scanning distance
100...2500 mm
14
Photoelectric proximity switches
7 14 17.5
6.5
■ Robust metal housing 10
1
■ Infrared light
2
■ Background suppression, with
3 4
very precise adjustment
87.5
■ M16 screw fixing rotatable by 90° 5
15
61
■ Front lens heating and 6
M5
4.7
8
26
selectable time delay, optional
max. 32
9
30 11.8
27 65
Adjustments possible 1 Alignment sight
WT 24-2R 220 WT 24-2R 210 2 LED signal strength indicator
3 Standard direction of the
2 2 material being scanned
4 Centre of optical axis, sender
5 Centre of optical axis,
receiver (close range)
10 6 Centre of optical axis,
1.0
1.0
10
receiver (far range)
7 M5 threaded mounting hole,
H H 6 mm deep
12 t2 11 11
D D
8 M5 threaded mounting hole,
13 t1 through-hole
t1 t2
14 9 M16 screw fixing rotatable
t0
t1 + t 2 by 90°
10 Scanning distance adjustment
11 Light/dark selector
12 Time control t2 = OFF-delay
13 Time control t1 = ON-delay
14 Time delay selector switch
Connection type
WT 24-2R 210
WT 24-2R 220
3 30 2500 8
90%/90%
2
3
0
(mm) 500 1000 1500 2000 2500 3000
Dimensional drawing
Scanning range
22 m
14
Photoelectric reflex switches
5 14 17.5
6.5
■ Robust metal housing 10
1
■ High operating reserve in visible
2
red light
87.5
■ M16 screw fixing or plug rotatable 3
14
by 90° 4
■ Front lens heating and selectable M5
37
4.7
6
time delay, optional
max. 32
7
30 11.8
27 65
Connection types
WL 24-2B 230 WL 24-2V 230 WL 24-2B 333 WL 24-2B 430 WL 24-2V 530
WL 24-2B 240 WL 24-2B 440
See chapter Accessories M16, terminals M16, terminals 3-pin 4-pin, M12 5-pin, M12
Cables and connectors
brn 1 brn 1 1
Mounting systems 1 L+ 1 L+ L+ L+ brn
L+
Reflectors blu 2 blu 3 blu 3
2 M 2 M M M M
Special accessories blk 3 blk 4 blk 4
3 Alarm Q/Q Q/Q Q/Q
gra 5
4 Q/Q 4 Q/Q Alarm
wht 2 wht 2
5 TE 5 TE TE TE
Technical data WL 24-2 B 230 B 240 B 333 B 430 B 440 V 230 V 530
Supply voltage VS 10 . . . 30 V DC 2)
Residual ripple3) < 5 VSS
Current consumption 4) ≤ 50 mA
≤ 70 mA, front lens heating
–
Switching outputs PNP or NPN, Q or Q
Output current IA max. 100 mA
Response time 5) ≤ 500 µs
Max. switching frequency 6) 1000/s
Pre-failure signalling output Alarm, PNP
Time delay Adjustable, 0.5 . . .10 sec
Operating range
Reflector type Operating range
1 PL 80 A 0 . . .15.0 m
2 PL 50 A 0 . . .11.0 m
Scanning range,
3 PL 40 A 0 . . .11.0 m max. typical
1
4 PL 30 A 0 . . .7.0 m (m) 5 10 15 20 25
5 PL 20 A 0 . . .7.0 m
Dimensional drawing
Scanning range
22 m
14
Photoelectric reflex switches
5 14 17.5
6.5
■ Robust metal housing 10
1
■ Large operating reserve and
2
visible red light
87.5
■ M16 screw fixing rotatable by 90° 3
14
■ Front lens heating and selectable 4
time delay, optional M5
37
4.7
6
max. 32
7
30 11.8
27 65
Connection type
WL 24-2R 230
WL 24-2R 240
3 0 11 16
4 0 7 10
4 1
5 0 7 10
5
0 (m) 4 8 12 16 20 24 10
■ Operating range ■ Scanning range,
max. typical
2
3
Operating reserve
Operating range
Reflector type Operating range
1 PL 80 A 0 . . .15.0 m
2 PL 50 A 0 . . .11.0 m
Scanning range,
3 PL 40 A 0 . . .11.0 m max. typical
1
4 PL 30 A 0 . . .7.0 m (m) 5 10 15 20 25
5 PL 20 A 0 . . .7.0 m
Dimensional drawing
Scanning range
0...60 m
14
Through-beam photoelectric switches
4 14 17.5
6.5
10
■ Robust metal housing 1
■ Large operating reserve and 2
visible red light
■ M16 screw fixing or plug
87.5
3
rotatable by 90°
48
■ Front lens heating and M5
4.7
5
selectable time delay, optional
max. 32
6
30 11.8
27 65
Adjustments
WS/WE possible
24-2B 440 WS/WE 24-2B 230 1 Alignment sight
WS/WE 24-2B 240 WS/WE 24-2B 230 2 LED signal strength indicator
WS/WE 24-2B 440 WS/WE 24-2B 333 3 Centre of optical axis
WS/WE 24-2B 430 4 M5 threaded mounting hole,
WS/WE 24-2V 530 6 mm deep
5 M5 threaded mounting hole,
2 2
through-hole
6 M16 screw fixing and plug
rotatable by 90°
7 Sensitivity adjustment
7 7
8 Light/dark selector
9 NPN/PNP selector
H H 10 Time control t2 = OFF-delay
10 t2 8 8
D D 11 Time control t1 = ON-delay
11 NPN NPN 12 Time delay selector switch
t1
t1 t2 PNP PNP
12 9 9
t0
t1 + t 2
Connection types
WS/WE 24-2B 230 WS/WE 24-2B 333 WS/WE 24-2B 430 WS/WE 24-2V 530
WS/WE 24-2B 240 WS/WE 24-2B 440
See chapter Accessories M16, terminals 3-pin 4-pin, M12 5-pin, M12
Cables and connectors
Mounting systems Sender brn 1 brn 1 brn 1
1 L+ L+ L+ L+
Special accessories blu 2 blu 3 blu 3
2 M M M M
blk 3
5 TE TE
wht 2 wht 2
TE TE
Technical data WS/WE 24-2 B 230 B 240 B 333 B 430 B 440 V 530
Supply voltage VS 10 . . . 30 V DC 2)
Residual ripple3) < 5 VSS
Current consumption 4)
Sender without heating ≤ 50 mA
Sender with heating ≤ 70 mA
Receiver without heating ≤ 40 mA
Receiver with heating ≤ 60 mA
–
Switching outputs PNP or NPN, Q or Q
Output current IA max. 100 mA
Response time 5) ≤ 500 µs
Max. switching frequency 6) 1000/s
Pre-failure signalling output Alarm, PNP
Time delay Adjustable, 0.5 . . .10 sec
Operating range
Dimensional drawing
Scanning range
0...60 m
14
Through-beam photoelectric switches
4 14 17.5
6.5
■ Robust metal housing 10
1
■ Large operating reserve and
2
visible red light
■ M16 screw fixing rotatable by 90°
87.5
3
■ Front lens heating and
48
selectable time delay, optional M5
4.7
5
max. 32
6
30 11.8
27 65
Adjustments possible 1 Alignment sight
WS/WE 24-2R 240 WS/WE 24-2R 230 2 LED signal strength indicator
3 Centre of optical axis
2 2 4 M5 threaded mounting hole,
6 mm deep
5 M5 threaded mounting hole,
through-hole
7 7 6 M16 screw fixing rotatable by 90°
7 Sensitivity adjustment
8 Light/dark selector
H H
9 t2 8 8 9 Time control t2 = OFF-delay
D D
10 Time control t1 = ON-delay
10 t1 11 Time delay selector switch
t1 t2
11 t0
t1 + t 2
Connection type
WS/WE 24-2R 230
WS/WE 24-2R 240
Receiver 1 L1
2 N
3
4
5
0 (m) 10 20 30 40 50 60
Operating range