Professional Documents
Culture Documents
D D D D D D D D: SN54HC139, SN74HC139 Dual 2-Line To 4-Line Decoders/Demultiplexers
D D D D D D D D: SN54HC139, SN74HC139 Dual 2-Line To 4-Line Decoders/Demultiplexers
D D D D D D D D: SN54HC139, SN74HC139 Dual 2-Line To 4-Line Decoders/Demultiplexers
VCC
The ’HC139 devices are designed for
NC
1G
2G
1A
high-performance memory-decoding or
data-routing applications requiring very short 3 2 1 20 19
1B 4 18 2A
propagation delay times. In high-performance
memory systems, these decoders can minimize 1Y0 5 17 2B
the effects of system decoding. When employed NC 6 16 NC
with high-speed memories utilizing a fast enable 1Y1 7 15 2Y0
circuit, the delay time of these decoders and the 1Y2 8 14 2Y1
9 10 11 12 13
enable time of the memory usually are less than
the typical access time of the memory. This means
1Y3
2Y3
2Y2
NC
GND
that the effective system delay introduced by the
decoders is negligible. NC – No internal connection
The ’HC139 devices comprise two individual 2-line to 4-line decoders in a single package. The active-low enable
(G) input can be used as a data line in demultiplexing applications. These decoders/demultiplexers feature fully
buffered inputs, each of which represents only one normalized load to its driving circuit.
ORDERING INFORMATION
ORDERABLE TOP-SIDE
TA PACKAGE†
PART NUMBER MARKING
PDIP – N Tube SN74HC139N SN74HC139N
Tube SN74HC139D
SOIC – D HC139
Tape and reel SN74HC139DR
–40°C to 85°C SOP – NS Tape and reel SN74HC139NSR HC139
SSOP – DB Tape and reel SN74HC139DBR HC139
Tube SN74HC139PW
TSSOP – PW HC139
Tape and reel SN74HC139PWR
CDIP – J Tube SNJ54HC139J SNJ54HC139J
–55°C to 125°C CFP – W Tube SNJ54HC139W SNJ54HC139W
LCCC – FK Tube SNJ54HC139FK
SNJ54HC139FK
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright 2002, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested
standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production
testing of all parameters. processing does not necessarily include testing of all parameters.
FUNCTION TABLE
INPUTS
OUTPUTS
SELECT
G
B A Y0 Y1 Y2 Y3
H X X H H H H
L L L L H H H
L L H H L H H
L H L H H L H
L H H H H H L
1
1G 5
1Y1
6
1Y2
2
1A
7
3 1Y3
1B
12
2Y0
15
2G 11
2Y1
10
2Y2
14
2A
9
13 2Y3
2B
Pin numbers shown are for the D, DB, J, N, NS, PW, and W packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
In-Phase VOH
90% 90%
Output 50% 50%
LOAD CIRCUIT 10% 10%
VOL
tr tf
tPHL tPLH
VCC
90% 90% VOH
Input 50% 50% Out-of-Phase 90% 90%
10% 10% 0 V 50% 50%
Output 10% 10%
VOL
tr tf tf tr
PINS **
14 16 20
DIM
0.100 (2,54)
0.020 (0,51) MIN A
0.070 (1,78)
0.023 (0,58)
0.015 (0,38) 0°–15°
4040083/E 03/99
0.006 (0,15)
0.080 (2,03) 0.004 (0,10)
0.055 (1,40)
1 16 0.019 (0,48)
0.015 (0,38)
0.050 (1,27)
0.430 (10,92)
0.370 (9,40)
8 9
NO. OF A B
18 17 16 15 14 13 12
TERMINALS
** MIN MAX MIN MAX
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
4040140 / D 10/96
PINS **
14 16 18 20
DIM
1 8
0.070 (1,78) MAX
0.325 (8,26)
0.035 (0,89) MAX 0.020 (0,51) MIN
0.300 (7,62)
0.015 (0,38)
Seating Plane
0.020 (0,51)
0.050 (1,27) 0.010 (0,25)
0.014 (0,35)
8 5
Gage Plane
1 4 0.010 (0,25)
A 0°– 8°
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
0.069 (1,75) MAX 0.004 (0,10)
0.004 (0,10)
PINS **
8 14 16
DIM
4040047/E 09/01
0,51
1,27 0,25 M
0,35
14 8
0,15 NOM
5,60 8,20
5,00 7,40
Gage Plane
1 7 0,25
Seating Plane
PINS **
14 16 20 24
DIM
4040062 / B 02/95
0,38
0,65 0,15 M
0,22
28 15
0,25
0,09
5,60 8,20
5,00 7,40
Gage Plane
1 14 0,25
A 0°–ā8° 0,95
0,55
Seating Plane
PINS **
14 16 20 24 28 30 38
DIM
4040065 /E 12/01
0,30
0,65 0,10 M
0,19
14 8
0,15 NOM
4,50 6,60
4,30 6,20
Gage Plane
0,25
1 7
0°– 8°
A 0,75
0,50
Seating Plane
PINS **
8 14 16 20 24 28
DIM
4040064/F 01/97
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265