Professional Documents
Culture Documents
Selec: Operating Instructions Configuration Mode
Selec: Operating Instructions Configuration Mode
5mm)
Operating Instructions CONFIGURATION MODE
OP376-V01
S
TIME SET MODE
600-DT
RST 1. Enter by pressing the key 'S' for 5 sec.
2. Press the key 'S' to select next digit.
On line Config. Front Reset 3. If 'S' key is pressed when cursor is at the right
1 most position [and the parameter being set is
Process time Parameter name
not the last one ] the next parameter is
2 Set time Parameter Options displayed. And if it is the last parameter then it
3 Output Status ( Lit when O/P is ON ) exits the time set mode and all parameters are
4 Time Range ( Blink in online Mode ) stored in memory.
5 Operating Mode
Doc. name : OP INST 600-DT RoHS OP376-V01(Page 1 of 2)
MODE OF OPERATION
TERMINAL CONNECTION
COM
Factory Address :
EL-27/1, Electronic Zone, TTC Industrial Area,
MIDC, Mahape, Navi Mumbai - 400 710, INDIA.
Tel. No. : +91-22-28476443 / 1882
Fax No. : +91-22-28471733 I Toll free : 1800 227 353
Website: www.selec.com I Email: sales@selec.com
Doc. name : OP INST 600-DT RoHS OP376-V01(Page 2 of 2)