Professional Documents
Culture Documents
What Would Be The Normal Viscosity Range For An Engine Oil at Operating Temperature
What Would Be The Normal Viscosity Range For An Engine Oil at Operating Temperature
Answer:
10 to 50 centistokes
Answer:
Solubility
3-
4-
Answer:
There are 25.4 microns in one-thousandth of an
inch (0.001) or 25,400 microns in 1 inch.
One micron equals three hundred ninety
thousandths of an inch (0.000039).
Answer:
Anti-scuff
Answer:
Pour point depressant
Answer:
Shaft orientation
10- Answer:
Increases
C54
C50
Answer:
Shear stability
C29
Answer:
API Group I
C91
C99
17- Can an unadditized mineral oil have a VI
greater than 100?
Answer:
Yes
C89
Answer:
Reference the safety data sheet (SDS) for correct
action.
C66
Answer:
Clay (bentone) and silica aerogel
These thickeners are used in high-temperature
greases.
C47
Answer:
Viscosity will decrease.
Answer:
Kinematic viscosity
C10
C72
Answer:
25.4
C178
C 161
27- When selecting a lubricating oil for a particular
application, what is typically the first step?
Answer:
Selecting the viscosity
C47
C195
C37
30- List the five functions of a lubricant.
Control wear, control friction, control temperature, control
corrosion and control contamination.
C87
C22
Answer:
Winter
C21
Answer:
PAO
C58
Answer:
Consistency, dropping point and shear stability
C246
Answer:
Increased viscosity
Water leads to stable emulsions, higher viscosity
and non-Newtonian properties (higher viscosity and
impaired load-carrying capacity).
C4
Answer:
Particle counts
C61
Answer:
3-30 percent
C15
Answer:
Solvency
Answer:
25 percent
C35
Answer:
Complex soaps
C38
C37
Answer:
Dispersant
C174
Answer:
Wet sump systems
Purge mist housings have oil levels that must be
maintained and are classified as wet sump
systems.
C2
Answer:
Examination of the bottom sediment and water
bowl (BS&W)
C33
Answer:
Dispersants
Answer:
Two-thirds
C40
Answer:
Pour point depressant
Pour point depressants lower the temperature at
which paraffin begins to crystalize, inhibiting flow at
colder temperatures.
C67
Answer:
Adhesive wear
C3
Answer:
Condition-based
C 79
58- What are the principal thickeners
used in grease manufacturing?
Soaps of lithium, calcium and
aluminum
C262
59- What is a common rolling-contact wear mode?
Answer:
Surface fatigue
Answer:
C26-C40
C86
C92
62-
63-
64-
65-
66-
67-
68-
69-
70-
71-
72-
73-
74-
75-
76-
77-
78-
79-
80-
81-
82-
83-
84-
85-
86-
87-
88-
89-
90-
91-
92-
93-
94-
95-
96-
97-
98-
99-
100-
101-
102-
103-
104-
105-
106-
107-
108-
109-