Professional Documents
Culture Documents
Flexpoint 100Fx/Tx: Key Features
Flexpoint 100Fx/Tx: Key Features
TM
FlexPoint 100Fx/Tx
Fast Ethernet Copper to Fiber Media Converter
Frame Size Supports unlimited frame sizes 100Fx/Tx converts the fiber to UTP in a fiber-to-desktop
application (B). An Ethernet switch (C) is connected directly
Copper: 100BASE-TX (RJ-45)
Port Types
Fiber: 100BASE-FX (ST, SC, MT-RJ, LC)
via fiber to the FlexPoint module at the Network Core. In all
cases, multimode or single-mode fiber can be used, and fiber
Copper: EIA/TIA 568A/B, Cat 5 UTP and higher
Cable Types
links can be extended up to 120km using single-mode fiber.
Fiber: Multimode: 50/125µm, 62.5/125µm
Single-mode: 9/125µm
Commercial: 0 to 50°C
Temperature Wide: -40 to 60°C
Storage: -40 to 80°C
MM/DF 5km 4332-x 4330-x 4336-x 4353-1x 1310 1310 -24 -14 -31 -14 - 7
SM/SF 1
20km - 4352-2x - - 1550 1310 -15 -5 -30 -3 - 15
AC Adapter Kits (-x): -0 = No AC adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord)
For wide temperature (-40 to 60°C), add a “W” to the end of the model number.
1
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
Contact Omnitron for other fiber options, operational temperature ranges and RoHS (5/6) compliant models.
© 2016 Omnitron Systems Technology, Inc. All rights reserved. FlexPoint is a Trademark of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-04330-004H 9/16