Professional Documents
Culture Documents
3.modeling of Mechanical System
3.modeling of Mechanical System
3.modeling of Mechanical System
Mechanical System
Modeling of Mechanical System
Types
d 2 x(t )
f (t ) Ma M
dt 2
Applied force Opposing force developed by mass
F ( S ) MS 2 X ( S )
This is done by using the D' Alembert's principle which is similar to the
Kirchhoff's laws in Electrical Networks. Also, this principle is a modified
version of Newton's second law of motion. The D' Alembert's principle
states that,
F ( S ) fV SX ( S )
Sliding on a film of oil
K – Spring constant
f ( t ) Kx( t )
Applied force Opposing force developed by
spring element
F ( S ) KX ( S )
w.r.t first node w.r.t first node
f (t ) K[ x1 (t ) x2 (t )] f ( t ) fV [ x 1 ( t ) x 2 ( t )]
Free-body diagram
Sum of opposing forces = Applied force
Each mass element gives one linearly independent displacement. (Mass element is
the point of displacement).
d 2 x1 dx d ( x1 x2 ) 1
f ( t ) M1 2 fV 1 1 fV 3 K 1 x1 K 2 ( x1 x2 )
dt dt dt
d 2 x2 dx2 d ( x2 x1 ) 2
0 M2 2
fV 2 fV 3 K 3 x2 K 2 ( x2 x1 )
dt dt dt
∆ = 𝑀1𝑆2 + 𝑓𝑣1 + 𝑓𝑣3 𝑠 + 𝐾1 + 𝐾3 ∗ 𝑀2𝑆2 + 𝑓𝑣2 + 𝑓𝑣3 𝑠 + 𝐾2 + 𝐾3 -(fv3S+K2)2