Professional Documents
Culture Documents
Product Manual For Live Working Gloves of Insulating Material ACCORDING TO IS 13774:2014 / IEC 60903:2002
Product Manual For Live Working Gloves of Insulating Material ACCORDING TO IS 13774:2014 / IEC 60903:2002
2. Sampling Guidelines:
a) Raw material : -
b) Grouping Guidelines : Please refer Annex A
15 Pairs of Gloves min. Additional samples may be
c) Sample Size :
necessary depending on the type of glove.
Scheme of Inspection
4. : Please refer ANNEX C
and Testing
Class Class 00 / 0 / 1 / 2 / 3 / 4
Special Category (if
A/H/Z/R/C
any)
Size 8 / 9 / 10 / 11
Standard Length 280 / 360 / 410 / 460 / 800 mm or any other Length
ANNEX A
Grouping Guidelines
1. The parameters as given below shall be considered for grouping of Live Working Gloves of
Insulating Material as per IS 13774 / IEC 60903 for GoL/CSoL:
2. The Firm shall declare the varieties of gloves they intend to cover in the Licence.
i. If a higher class of gloves (1.ii) is tested, lower classes may also be covered without further
testing.
ii. If longer gloves are tested (1.v), shorter gloves may also be covered without further testing.
iii. If gloves of a certain class with a combination of special properties (1.iii) are tested, gloves
of each such category of the same or lower classes may be covered without further testing.
If gloves of category R are tested, gloves of category A, H, Z and each combination thereof
may be covered without further testing.
5. Gloves of any one size (1.iv) in a group shall be tested for covering all the sizes of gloves in
that group.
6. The Scope of Licence may be restricted based on the Manufacturing (Size designation of the
moulds for Size and their height for Length of the Gloves) and Testing capabilities of the
Manufacturer.
7. During the operation of the Licence, BO shall ensure that all the varieties covered in the
Licence are tested in rotation, to the extent possible.
2
PM/IS 13774/IEC 60903/1/January 2020
ANNEX B
3
PM/IS 13774/IEC 60903/1/January 2020
The above list is indicative only and may not be treated as exhaustive.
4
PM/IS 13774/IEC 60903/1/January 2020
ANNEX C
1.1 The manufacturer shall prepare a calibration plan for the test equipments.
2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out
to establish conformity.
4. CONTROL UNIT – All gloves of the same type, class and category made out of the same
batch of raw materials under similar conditions, manufactured in a day shall constitute a control
unit.
5. LEVELS OF CONTROL - The tests as indicated in column 1 of Table 1 and the levels of
control in Column 3 of Table 1, shall be carried out on the whole production of the factory
which is covered by this plan and appropriate records maintained in accordance with paragraph
2 above.
5.1 All the production which conforms to the Indian Standards and covered by the licence
should be marked with Standard Mark.
5
PM/IS 13774/IEC 60903/1/January 2020
TABLE 1
5.3 Leakage Current 10.3 IS 13774 R Three Each Control Applicable for Long Composite Gloves
Test Unit only.
5.4 Ageing Test 8.5 IS 13774 R Three Once a
fortnight
5.5.1 Low Temperature 8.6.1 IS 13774 R Three Once a month
Thermal Test
5.5.2 Thermal Test – 8.6.2 IS 13774 S Three Once a month
Flame Retardancy
Test
5.6.1 Special Properties – 8.7.1 IS 13774 S Three Once a month
Category A – Acid
Resistance
5.6.2 Special Properties – 8.7.2 IS 13774 S Three Once a month
The manufacturer shall ensure rotation of
Category H – Oil
sizes, types and classes to ensure that all
Resistance
varieties (included in their scope) are tested
5.6.3 Special Properties – 8.7.3 IS 13774 S One Once a month
in the span of one year.
Category Z – Ozone
Resistance
5.6.4 Special Properties – -- IS 13774 S One Once a month
Category R – Acid,
Oil & Ozone
Resistance
5.6.5 Special Properties – 8.7.4 IS 13774 R Three Once a month
Category C –
Extremely Low
Temperature
Resistance
6.2.2 Abrasion Resistance 9.1 IS 13774 R Three Each Control Applicable for Composite Gloves only.
Unit
6.2.3 Cutting Resistance 9.2 IS 13774 R Three Each Control Applicable for Composite Gloves only.
Unit
6.2.4 Tear Resistance 9.3 IS 13774 R Three Each Control Applicable for Composite Gloves only.
Unit
7
PM/IS 13774/IEC 60903/1/January 2020
Note-1: Sub-contracting is permitted to a laboratory recognized by the Bureau or Government laboratories empanelled by the Bureau.
Note-2: Levels of control given in column 3 are only recommendatory in nature. The manufacturer may define the control unit/batch/lot and submit his
own levels of control in column 3 with proper justification for approval by BO Head.
Note-3: If there is a failure, appropriate steps shall be taken for rectifying the cause of the defect in subsequent control units/samples and record of the
same shall be maintained.
8
PM/IS 13774/IEC 60903/1/January 2020
ANNEX D