Ex-501 Utilisation of Electrical Energy Dec 2011

You might also like

Download as pdf
Download as pdf
You are on page 1of 2
‘Total No. of Questions : 10 | { Total No. of Prince Rell No... Rgpvoniine.com EX-501 E, (Fifth Semester) EXAMINATION, Dec., 2011 (Blectrical and Electronics Engg, Branch) UTILISATION OF ELECTRICAL ENERGY (eX—s01) Time : Three Hours Maximum Marks » 100 ‘Minium Pass Marks: 35 Note: Attempt five questions in all, One question from excit Unit is compulsory. ll questions catry equal marks Unit 1, @)_A lamp of 1000 C. Ps hung 10 m over the centre foo: of hall 15 m square, Find the illumination at the point below Iamp and at the corners, neglecting the reflection from walls and ceilings (©) What are the objects to be achieved for good street lighting and what are main faults ta be avoided ? Or 2 (@)' Find the candle power of a lamp 1 produce iMhumination of 8 lux on a surface § metres from lamp when rays are normal 10 the surface, (i) when the ray$ are inclined 10 normal st 60°. (b) Compare gas discharge lamps with fluorescent Imps RTO. @ o) @ ) Uniti Why is electri heating preferred over other form of heating ® Give some typical heating alloys and their ‘maximum temperature lin. Explain the process of electric are welding and uaities of a good weld Or Give the principle and applications of dielectric heating Explain the laws of electrolysis. Unit—ut Figpvontine.com Explain the following @ o) @®) ) @ w) @) Specific energy consumption Coefficient of adhesion Or ‘A train has a scheduled speed of 30 kmph over a level track, distance between stations being 1 km. Station Stopping time is 20 see. Assuming braking retardation of 2 kmphps and maximum speed 259% greater than average speed, calculate acceleration to run the Explain mechanics of train movement. Unit—1V Compare the various methods of electric braking. Which factors do govern the service capacity and rating of the machine ? Or ‘What is the importance of load equalisation and how is it done ? (©) Give the criteria for the selection of motor for a particular application Unit—v 9, What are the characteristics required for the traction motor ? Compare the suitability of single-phase an! three- phase motor for it Or 10.(@) Write @ note on transfusion requirement of traction motor. (b) Why do electrical vehicles perform better” than mechanical motor ? PX=s01 7.990

You might also like