The initial project prototype could not meet the design requirements of being statically stable, environmentally friendly, and able to carry over 3 kg. After editing the prototype, it was able to carry 3 kg as shown through testing. Additional testing showed that as weight increased from 0.5 kg to 3.5 kg in 0.5 kg increments, the angle of bending of the crane's jib increased in a relationship explained through trigonometric functions and a provided graph and table.
The initial project prototype could not meet the design requirements of being statically stable, environmentally friendly, and able to carry over 3 kg. After editing the prototype, it was able to carry 3 kg as shown through testing. Additional testing showed that as weight increased from 0.5 kg to 3.5 kg in 0.5 kg increments, the angle of bending of the crane's jib increased in a relationship explained through trigonometric functions and a provided graph and table.
The initial project prototype could not meet the design requirements of being statically stable, environmentally friendly, and able to carry over 3 kg. After editing the prototype, it was able to carry 3 kg as shown through testing. Additional testing showed that as weight increased from 0.5 kg to 3.5 kg in 0.5 kg increments, the angle of bending of the crane's jib increased in a relationship explained through trigonometric functions and a provided graph and table.
The initial project prototype could not meet the design requirements of being statically stable, environmentally friendly, and able to carry over 3 kg. After editing the prototype, it was able to carry 3 kg as shown through testing. Additional testing showed that as weight increased from 0.5 kg to 3.5 kg in 0.5 kg increments, the angle of bending of the crane's jib increased in a relationship explained through trigonometric functions and a provided graph and table.
The project that was made had to achieve some design
requirements like that it should be static stable and should be friendly to the environment in addition that it should carry more than 3 kg. First, it couldn’t achieve the design requirements, but after the prototype had been edited, it could carry 3 kg. The test plan for the prototype proved that it had already achieved these design requirements as it could carry 3 kg. But, unfortunately after adding each ½ kg, the angle of bending in the jip changes with the changing in the weight that the crane carries. This angle of bending could be determined by the trigonometric functions and the following graph and table explain this: Weight (W) The angle of bending (Theta) 0.5 0.2 1 0.6 1.5 0.9 2 1.3 2.5 1.7 3 2 3.5 2.4