Professional Documents
Culture Documents
Purchase Spec. For Flange-Nickel Alloy Forgings (SB564 Uns N08825)
Purchase Spec. For Flange-Nickel Alloy Forgings (SB564 Uns N08825)
Review &
Rev. No. Date Description Prepared by:
Approved by:
Review &
Rev. No. Date Description Prepared by:
Approved by:
Exhibit 03 ASME form-003
Date : 15th Apr 2006 Rev. 0
Doc.No. : SWI0900023-01-PS-06A
S&W HEAT
PURCHASE SPECIFICATION Rev.No. : 0
EXCHANGERS
(S) PTE LTD Page No.: 2 of 3
1.0 General
1.1 Scope
Specification for Nickel Alloy forgings
1.2 Code
American Society of Mechanical Engineers (ASME):
Section II Part B, Non-Ferrous Material Specification, 2007 Edition. + 2008 Add.
mposition prescribed
erties prescribed
2.8 The manufacturer or processor shall report the results of all test required by this
Specification, the applicable supplementary requirements (if applicable) and the
Purchase Order. The heat number, the plate identifier of the plate tested, and the
nominal plate thickness shall be shown in the test report. The year-date of the specification
to which the plates are furnished shall be included in the test report.
The Certified Test Report shall be dated and clearly identify the organization submitting the
report.
2.9 Material Mill Certificates shall be in accordance with EN-10204 3.1.
3.0 The size and quantity of flanges/couplings shall be follow as per the relevant PRS.