Professional Documents
Culture Documents
Purchase Spec. For Plugs-Forging (Sa105)
Purchase Spec. For Plugs-Forging (Sa105)
Review &
Rev. No. Date Description Prepared by:
Approved by:
Review &
Rev. No. Date Description Prepared by:
Approved by:
Exhibit 03 ASME form-003
Date : 15th Apr 2006 Rev. 0
Doc.No. : SWI0900029-PS-01
S&W HEAT
PURCHASE SPECIFICATION Rev.No. : 1
EXCHANGERS
(S) PTE LTD Page No.: 2 of 3
1.0 General
1.1 Scope
Specification for Carbon Steel Forgings
1.2 Code
American Society of Mechanical Engineers (ASME):
Section II Part A, Ferrous Material Specification, 2007 Edition+2008ADD.
1.4 End Use : For use as header plugs for Air Cooled Exchangers.
In addition, the Certified test Report shall include the following information and test results
2.7.1 Heat Number
2.7.2 Heat Analysis
2.7.3 Tensile Properties
2.7.4 Hardness Results
2.7.5 Other test results to be reported by the product specification
2.8 Material Mill Certificates shall be in accordance with EN-10204 3.1.
2.90 Dimensions and quantity shall be as per relevant Purchase Requesition.
2.10 SURFACE COATING SHALL USE XYLAR+XYLAN 1070
2.11 Material shall be from LLOYD'S Approved mills.