Professional Documents
Culture Documents
SECTION 09826 Aggregate Floor Surfacing
SECTION 09826 Aggregate Floor Surfacing
SECTION 09826
PART I - GENERAL
1.1 GENERAL REQUIREMENTS
B. Aggregate surfacing.
1.3 SUBMITALS
B. Submit product data for matrix materials, including their physical and
performance characteristics.
B. Include cleaning requirements, stain and graffiti removal, and rejuvenation of top
coat procedures.
A. Provide one (1) field sample panel, 900 x 900 mm. illustrating applied aggregate
in the selected color.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Deliver products to site. Store and protect products.
1.8 ENVIRONMENTAL REQUIREMENTS
A. Provide temporary enclosures, heat, and ventilation in areas where work is being
performed to allow work to cure.
PART 2 - PRODUCTS
2.1 MATERIALS
A. Cementitious: Binder Matrix:" Portland cement modified with acrylic polymers,
sand and fine mineral colored aggregate.
B. Aggregate Surfacing: Smooth surface fine mineral colored aggregate.
C. Overcoat: Clear, breathable non-yellowing as recommended by manufacturer.
2.2 COLORS
A. Matrix Binder: color as selected.
B. Aggregate: color range as selected from standard color chart.
PART3 - EXECUTION
3.1 EXAMINATION
A. Verify that substrate is ready to receive work and that surface is clean. dry. and
free of substances which could affect bonding.
B. Do not begin work until concrete substrate has cured 28 days minimum, and
measured moisture content is not greater than 16 percent.
C. Measure concrete surface for negative alkalinity with litmus paper test.
3.2 PROTECTION
A. Protect elements surrounding the work of this Section from damage or
disfiguration.
3.3 PREPARATION
3.4 APPLICATION
3.5 TOLERANCES
3.6 CLEANING
END OF SECTION