Professional Documents
Culture Documents
2017-2018 CEE2219 TM1 MidExam - 2017-18
2017-2018 CEE2219 TM1 MidExam - 2017-18
School of Engineering
Department of Civil & Environmental Engineering
MID-TERM TEST
Instructions to candidates:
1. Candidates must ensure that their computer numbers are clearly written on each
answer sheet used
2. Answer all the FIVE questions. All questions carry equal marks (20%)
Question 1
Determine the resultant of the three forces acting on the bracket as shown below .
1
Question 2
The shearing forces exerted on the cross section of a steel channel can be represented by a
900-N vertical force and two 250-N horizontal forces as shown. Replace this force and couple
with a single force F applied at point C, and determine the distance x from C to line BD. (Point C
is defined as the shear center of the section.)
2
Question 3
To keep a door closed, a wooden stick is wedged between the floor and the doorknob. The stick
exerts at B a 175-N force directed along line AB. Replace that force with an equivalent force-
couple system at C.
3
Question 4
A lever AB is hinged at C and attached to a control cable at A. Ifthe lever is subjected to a 500-N
horizontal force at B, determine
Question 5