Professional Documents
Culture Documents
Analysis
Analysis
We can find friction in any places and it is unavoidable because it happens all the time in
our daily lives. There’s already a presence of friction in all object that changes it position. Life
won’t be possible if there is no presence of friction that is why friction is really important that we
must fully understand on how friction w0rks. We just need to follow carefully the concepts and
formula to get the value of coefficient of friction. This coefficient of friction is the messure of
h0w aspecific 0bject moves. If in the experiment you got a large amount of coefficient friction it
means that there are alot of frictioon between the object and the surface that is in contact with the
object.
When the friction is in static condition, the static friction is larger to thepoint where an
object is starting to have a motion. But the kinetic friction takes places if the moving object is
having a lower value of resistance. When net force of two surfaces which have friction or have
contact with each other which the direction is perpendicular to the surface. We can say that
In table 1, we are ask to determine the coefficient of friction by adding weights on the
hanger until the block starts to move in the plane. We got the average coefficient of friction of
0.198. In table 2 we must determine the angle of repose by adjusting both horizontal and vertical
height of the track and letting the block to slide. In table 3 we determine the maximum force to
put in a hanger that will make the block go move while in an inclining plane. I think the possible
source of error in this experiment is just human error. You just have to follow the procedure
The experiment’s objectives is to get the value of coefficient of friction in contact with
the surface until it moves in a unif0rmmotion, getting the angel of repose and determining the
maximum force to placed on a hanger to make a block to move in its uniform motion. Frictional
force is directly proportional to the normal force. But there isa constant that disregards the
In getting the coefficient of friction we must put the block in a platform to have its
uniform motion. We must balance the weight that we will put to the hanger and to the weight of
the block so that we are able to let the block to move in a uniform motion. The track is placed on
a inclining position with a different set of angles every trials, so that the cart is placed on the top
part of the track will definitely slides down because it is inclined. The motion or acceleration of
the block is based on the value of mass of the block and the hanger. In the experiment we added
a larger amount in the hanger while the block is in a inclined position so that is will accelerate.
We can also say that thee coefficientof friction is equal t0the tangnt of rep0se but the coefficeint
of friction wiil not have a relation between its area of conacct even if it have a smaller or bigger
area of contact its friction will have no effect to other objects. When we add more amount of
mass in the block it increases so the net force must also increase so that it will satisfy the state of
inertia