Professional Documents
Culture Documents
Huawei Wi-Fi 6 AP Tolly Test Report (AP7060DN AirEngine 5760-10) PDF
Huawei Wi-Fi 6 AP Tolly Test Report (AP7060DN AirEngine 5760-10) PDF
Huawei Wi-Fi 6 AP Tolly Test Report (AP7060DN AirEngine 5760-10) PDF
October 2019
Commissioned by
Huawei Technologies Co., Ltd.
Executive Summary
With the official launch of the Wi-Fi 6 standard, future-proof WLAN infrastructure should be Wi-Fi 6 compatible. Comparing to Wi-Fi 5 WLAN access
points (APs), Wi-Fi 6 APs provide greater bandwidth, higher concurrent users, lower latency and other benefits.
Huawei Technologies Co., Ltd. commissioned Tolly to evaluate the performance, capacity, interoperability and IoT integration of its Wi-Fi 6 access
points (AP7060DN, AirEngine 5760-10, and AirEngine 5760S-10). The Huawei AP7060DN is the first Wi-Fi 6 access point tested by Tolly and is the
fastest access point evaluated by Tolly to date.
Performance tests on the AP7060DN access point showed single-client throughput of 3.5Gbps with a Wi-Fi 6 client, bridging throughput of 3.8Gbps
between two AP7060DN access points on the 5GHz radio, multimedia application support for 400 concurrent Wi-Fi 6 users, user capacity of 1,024
users, as well as a 15% performance improvement for multiple Wi-Fi 5 clients communicating with the new, Wi-Fi 6 AP. Tests also demonstrated
Huawei Wi-Fi 6 APs’ interoperability with all previous generation Wi-Fi clients, IoT application integration, VR acceleration, and auto guided vehicle
(AGV) roaming optimization.
2 Delivered 3.8Gbps wireless bridging throughput on the 5GHz radio between two AP7060DN access points
4 Provided 15% multi-client performance improvement over Wi-Fi 5 access point with the same Wi-Fi 5 clients
5 Demonstrated compatibility with 802.11a/b/g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) and Wi-Fi 6 (802.11ax) clients
6 Supported 512 Wi-Fi clients per radio and 1,024 Wi-Fi clients per access point
7 Provided power and data interfaces to mount the IoT (Internet of Things) module besides the AP for IoT application integration
10GbE Link
5GHz Radio
Ethernet Client Wi-Fi 6 Client
Emulated by Spirent TestCenter Emulated by Spirent TestCenter
Wireless Throughput
0 3.6
3.5Gbps
Note: The wired Ethernet client and the AP were not directly connected. One Layer 2 PoE switch was in between.
Wireless Throughput
0 3.8
3.8Gbps
Note: The wired Ethernet client and the AP were not directly connected. One Layer 2 PoE switch was in between.
450
300
150
0
TCP UDP
Note: 40 Apple MacBook Pro laptops (Wi-Fi 5, 3x3 MIMO and 3 spatial streams) were used as the clients.
Things) Integration
The Huawei AP7060DN provides an
interface on its side. The Huawei IoT
module can be mounted beside the AP and
use the interface to provide power and
data connection to any third-party IoT card
inserted into the module. The third party
IoT Module
Note: The IoT module is mounted beside the Huawei AP7060DN. Third party IoT card (e.g. RFID reader, Zigbee gateway, etc.) can be inserted into the IoT
module to have network data communication and power support from the AP7060DN. An E Ink price tag IoT solution is displayed in the picture.
APs are typically mounted on a ceiling, so WLAN APs (for bluetooth capable models,
Serial Port Connection accessing with a traditional serial cable can including the AP7060DN) support two
be complicated. Tolly engineers verified modes: bluetooth can be always on, or
via Bluetooth that Huawei wireless access points support automatically turned on after CAPWAP
serial port access with a mobile device’ tunnel fails. See Figure 5.
When the wireless access point bluetooth. In the “CloudCampus APP”
malfunctions and loses communication mobile app, engineers selected a nearby
with the wireless access controller, Huawei WLAN AP, accessed the serial port,
administrators need to access the wireless and executed CLI commands. Huawei
AP’s serial port and troubleshoot. Wireless
AGV Roaming
Optimization
Automated Guided Vehicles need to use
Wi-Fi access to obtain jobs and interact
with the control system. Since AGVs are
always moving, fast and reliable roaming is
critical for the entire system. In the test, one
Quicktron AGV travelled between two
Huawei AP7060DN access points back and
forth. In the 5 minutes’ testing time, the
AGV roamed 29 times. The AGV’s log
reported that the average roaming time
was 18.23 ms for each roaming process.
Meanwhile, the ping test from the
management server to the AGV did not
have frame loss during the entire test.
Source: Tolly, July 2019 Figure 6
Compatibility with
Previous Generation
Wi-Fi
Tolly engineers used one Windows laptop
and configured the NIC (network interface
controller) to be 802.11b, 802.11a, 802.11g,
802.11n (Wi-Fi 4) 2.4GHz/5GHz and
802.11ac (Wi-Fi 5). The laptop was able to
connect to Huawei AirEngine 5760-10’s Wi-
Fi network in all modes.
AP7060DN
3.5Gbps Single User Throughput (5GHz Radio)
15% Performance Improvement over the Wi-Fi 5 AP in the Multiple Wi-Fi 5 Clients’ Test
IoT Integration
VR Acceleration
Less than 7 ms round trip latency between the PC and the VR headset in an environment with co-channel interference and
more than 50% channel usage
IoT Integration
VR Acceleration
Less than 7 ms round trip latency between the PC and the VR headset in an environment with co-channel interference and
more than 50% channel usage
iperf3 -s -p 5004
Test Methodology iperf3 -s -p 5005
Multi-Client Performance (Wi-Fi 5)
Forty Apple MacBook Pro laptops were
AP7060DN The iPerf client laptop ran five iPerf
instances with the following commands:
used as the Wi-Fi 5 clients and stayed at the
same places during the test. Test was run in
One Huawei AC6005 was used for iperf3 -c 192.168.0.22 -i 2 -t 10000 -u -b 1G a shielded room.
management. AP7060DN worked in the -l 1470 -p 5001
iperf3 -c 192.168.0.22 -i 2 -t 10000 -u -b 1G For the TCP test, each client had two pairs
direct forwarding mode. Software version
-l 1470 -p 5002
of down streams with 80 total pairs. For the
VRP V5.170 V200R010 was used. The
iperf3 -c 192.168.0.22 -i 2 -t 10000 -u -b 1G UDP test, each client had three pairs of
AP7060DN access point was powered by
-l 1470 -p 5003
down streams with 120 total pairs.
one PoE switch using the 802.3bt standard.
iperf3 -c 192.168.0.22 -i 2 -t 10000 -u -b 1G
-l 1470 -p 5004
VR Acceleration
Single Client Throughput
iperf3 -c 192.168.0.22 -i 2 -t 10000 -u -b 1G One Pico VR headset was connected to the
One Spirent SPT N4U chassis with two -l 1470 -p 5005 Wi-Fi service hosted by the Huawei WLAN
modules were used as the test tool. The
access point. The WLAN AP was in the local
10GbE Ethernet module acted as the wired Test was run in a shielded room to avoid
forwarding mode. To create co-channel
side server and the MX2 802.11AX 2.4GHz/ interference from other sources. The two
interference, engineers used another PC
5GHz module acted as the wireless client. AP7060DN access points were bridged
and another WLAN access point which
The wireless client was connected to the using the 5GHz radio. They were less than 1
operated on the same channel as the AP
Huawei AP7060DN’s 5GHz radio with 4x4 meter away from each other.
under test and ran background traffic.
MIMO, 4 spatial streams and 160MHz
bandwidth. Then engineers used the User Capacity
Spirent TestCenter to create unidirectional
Tolly engineers used the LANforge WiFIRE
AirEngine 5760-10
traffic from the wired server through the
test tool developed by Candela One AC6605 WLAN access controller was
10GbE switch and the AP7060DN to the
Technologies to emulate 1,024 Wi-Fi clients. used for management, one Huawei
wireless client. UDP traffic with 1500-byte
Half of the clients were connected to the AirEngine 5760-10 WLAN access point was
frame size was used. Spirent TestCenter
2.4GHz radio of the Huawei AP7060DN under test in the local forwarding mode
recorded consistent 3.5Gbps throughput.
while the other half were connected to the with the VRP V5.170 V200R019 software
Since all wired connections were 10GbE
5GHz radio. All 1,024 Wi-Fi clients stayed version.
connections without any other traffic, the
connected to the AP7060DN.
downstream wireless throughput between
The 5GHz single client/user throughput test
the AP7060DN and the wireless client
(Spirent MX2 module) was 3.5Gbps.
Multi-Client Performance (Wi-Fi 6) used 2x2 MIMO and 80MHz bandwidth;
the 2.4GHz single client/user throughput
Tw o S p i r e n t M X 2 8 0 2 . 1 1 A X 4 -
Test was run in a shielded room to avoid test used 2x2 MIMO and 40MHz
Ports\MX2-11AX-2 modules were used on
interference from other sources. The bandwidth.
Spirent SPT N4U Chassis with eight total
wireless client was less than 1 meter away ports (four 5GHz ports and four 2.4GHz Other tests used similar methodology as
from the AP7060DN. ports). Each 5GHz port emulated 60 4x4 AP7060DN’s tests.
MIMO clients with four antennas and
AP Bridging Throughput 80MHz bandwidth. Each 2.4GHz port
The iPerf server laptop ran five iPerf emulated 40 4x4 MIMO clients with four
instances with the following commands: antennas and 40MHz bandwidth. Total 400
iperf3 -s -p 5001
clients (240 5GHz ones and 160 2.4GHz
iperf3 -s -p 5002
ones) were emulated. All clients were
iperf3 -s -p 5003
connected to the Huawei AP7060DN with
Wi-Fi.
Terms of Usage
This document is provided, free-of-charge, to help you understand whether a given product, technology or service merits additional
investigation for your particular needs. Any decision to purchase a product must be based on your own assessment of suitability
based on your needs. The document should never be used as a substitute for advice from a qualified IT or business professional. This
evaluation was focused on illustrating specific features and/or performance of the product(s) and was conducted under controlled,
laboratory conditions. Certain tests may have been tailored to reflect performance under ideal conditions; performance may vary
under real-world conditions. Users should run tests based on their own real-world scenarios to validate performance for their own
networks.
Reasonable efforts were made to ensure the accuracy of the data contained herein but errors and/or oversights can occur. The test/
audit documented herein may also rely on various test tools the accuracy of which is beyond our control. Furthermore, the
document relies on certain representations by the sponsor that are beyond our control to verify. Among these is that the software/
hardware tested is production or production track and is, or will be, available in equivalent or better form to commercial customers.
Accordingly, this document is provided "as is", and Tolly Enterprises, LLC (Tolly) gives no warranty, representation or undertaking,
whether express or implied, and accepts no legal responsibility, whether direct or indirect, for the accuracy, completeness, usefulness
or suitability of any information contained herein. By reviewing this document, you agree that your use of any information
contained herein is at your own risk, and you accept all risks and responsibility for losses, damages, costs and other consequences
resulting directly or indirectly from any information or material available on it. Tolly is not responsible for, and you agree to hold Tolly
and its related affiliates harmless from any loss, harm, injury or damage resulting from or arising out of your use of or reliance on any
of the information provided herein.
Tolly makes no claim as to whether any product or company described herein is suitable for investment. You should obtain your
own independent professional advice, whether legal, accounting or otherwise, before proceeding with any investment or project
related to any information, products or companies described herein. When foreign translations exist, the English document is
considered authoritative. To assure accuracy, only use documents downloaded directly from Tolly.com. No part of any document
may be reproduced, in whole or in part, without the specific written permission of Tolly. All trademarks used in the document are
owned by their respective owners. You agree not to use any trademark in or as the whole or part of your own trademarks in
connection with any activities, products or services which are not ours, or in a manner which may be confusing, misleading or
deceptive or in a manner that disparages us or our information, projects or developments.