Professional Documents
Culture Documents
Monarch Engineered Panel Mounting Systems Catalog PDF
Monarch Engineered Panel Mounting Systems Catalog PDF
Concealed Fastener
Thermally Isolated
Undercut Anchor
Exposed Fastener
Thermally Isolated
Rivet Type Fastener
WEB-19
Monarch Metal 1700 Ocean Ave Ronkonkoma, New York 11779 (631) 750 3000 zclip@monarchmetal.com
Ceiling Panel Ceiling
Installation Ceiling
System
3.375”
(Page 22-23) 1.5”
T
NEW PRODUC
Ceiling Panel
Ceiling Panel
MFCEIL-H
MFCEIL-S
For typical interior
ceiling installations to For installations in
minimize the drop regions with seismic
from the wall concerns
Stainless Steel
Cladding System
(Page 48)
Stone Cladding
Blind (Concealed)
Systems for
Cladding Installation
(Page 49)
CONTENTS
43 Cladding
102 CORNER GUARDS & KICK PLATES
43 • HPL Phenolic Systems
103 • Stainless Steel & Aluminum Corner Guards
45 • Stone, Fiber Concrete
104 • Stainless Steel & Aluminum Kick Plates
& Cement Systems
48 • Stainless Steel Systems
Architectural Metals
- 03 -
SYSTEMS
Overview .................................................... 05
MONARCH Z CLIPS
Monarch Metal has provided
the fastest and easiest method
to mount wall panels, signs,
art work and more for
close to 25 years.
(631)750-3000 www.monarchmetal.com 5
Overview
DIM4 4”
any dim For a typical 8’ high x 4’ wide panel,
customers mount the continuous lengths
along the wall at 3 different heights parallel
MONARCH Z CLIPS
.125”
6 (631)750-3000 www.monarchmetal.com
Choosing the Correct Monarch Hanging System
MONARCH Z CLIPS
(631)750-3000 www.monarchmetal.com 7
MF375 Clip
Standard Z Clips
Features
Standard
Monarch Z Clip system for hanging Applications
interior panels where the installer 3/8” Lift Off
desires a 3/8” length of engagement
MONARCH Z CLIPS
1/4” Projection
1/2” clearance required between
the top of the panel and the ceiling
FEATURES
1
6063-T6 Aluminum
1 MF375 Clip
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
MONARCH
Lift Off (1) 3/8 Inch
Projection (2) 1/4 Inch
Availability Same Day Shipping
3/8’’ Lift off 2” Length
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
8 (631)750-3000 www.monarchmetal.com
MF375 Even Clip
Standard Z Clips
Features
Alternative Clip
In line holes for 50% increase for MF375
in panel processing speed 3/8’’ Lift Off
MONARCH Z CLIPS
32mm hole spacing for 1/4’’ Projection
line boring equipment
6063-T6 Aluminum FEATURES
1/4” Projection
Specialty Clip
with In-Line
Holes
MONARCH
MF375
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
Lift Off (1) 3/8 Inch
Projection (2) 1/4 Inch
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
(631)750-3000 www.monarchmetal.com 9
MF625 Clip
Standard Z Clips
Features Standard
Applications
Monarch Z Clip system for hanging
5/8” Lift Off
interior panels where the installer
desires a 5/8” length of engagement 3/16” Projection
MONARCH Z CLIPS
1 MF625 Clip
.200” Projection
MF625
Material Aluminum
Stock Clip Size 1 1/2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
Lift Off (1) 5/8 Inch
Projection (2) 3/16 Inch
MONARCH
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
10 (631)750-3000 www.monarchmetal.com
MF250 Clip
Standard Z Clips
MONARCH Z CLIPS
1/4” Projection
3/8” clearance required between
the top of the panel and the ceiling FEATURES
6063-T6 Aluminum 1
1 MF250 Clip
1/4” Projection
MF250
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
Lift Off (1) 1/4 Inch MONARCH
Projection (2) 1/4 Inch
Availability Same Day Shipping
1/4 Lift off 2” Length
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
(631)750-3000 www.monarchmetal.com 11
MFSTR-050 Clip
Standard Z Clips
Features
High Strength
High strength aluminum system Applications
compatible with up to a 3/8’’ hex bolt
7/16” Lift Off
1
MONARCH Z CLIPS
1 MFSTR-050 2 MFSTR-050
2” Clip Continuous
Length
Ø.250 THRU
MFSTR050 x2
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
Lift Off (1) 7/16 Inch
2.000
Projection (2) 1/2 Inch
(Available in lengths up to 144”)
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
.437
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
1.500
sits out from the wall.
.125
.500
12 (631)750-3000 www.monarchmetal.com
MFSTR-1125 Clip
Standard Z Clips
Features
Cladding
Heavy duty adjustable height system Applications
for mounting curtain wall in exterior 1 5/8” Lift Off
applications
MONARCH Z CLIPS
1 1/8” Projection
Easy adjust bolt on clips for minor 2
height adjustments
FEATURES
Easy fit engagement for locating
3/4” clearance required above
the panel
6063-T6 Aluminum
Compatible with heavy duty hex bolts
up to 3/8” for additional strength
Perfect for mounting on concrete
block or other difficult materials
Ø.250 THRU
MFSTR-1125
Material Aluminum
Stock Clip Size 1.5 Inch
Stock Continuous Length 144 Inch
Custom Lengths Available Any 2.625
Lift Off (1) 5/8 Inch 2.000
1.49
Projection (2) 1 1/8 Inch
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel .750
over its resting height to mount the panel. 1.125
1.145
1.500
(2) The “Projection” is the distance that the panel
sits out from the wall. (Available in lengths up to 144”)
(631)750-3000 www.monarchmetal.com 13
Heavy Duty
Stainless Steel Clips
Stainless Steel Hidden Fastening Systems
Features
High Strength
High strength, corrosion resistant
MONARCH Z CLIPS
Corrosion Resistant
stainless steel material makes these Applications
perfect for use in exterior wet or harsh 1
3/4” Lift Off
environments
1/4” Projection
7/8” clearance required between
the top of the panel and the ceiling FEATURES
1 Heavy Duty
MFSS Clip
1/4” Projection
MFSS HD Clips
Material Stainless Steel
Stock Clip Size 1 1/2 Inch
Stock Continuous Length 48 Inch
Custom Lengths Available Any
Lift Off (1) 3/4 Inch
Projection (2) 1/4 Inch MONARCH
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
3/4” Lift off
1 1/2” Length
14 (631)750-3000 www.monarchmetal.com
Stainless Steel System
with 1” Projection
Stainless Steel Hidden Fastening Systems
Features
High Strength
High strength, corrosion resistant
MONARCH Z CLIPS
Corrosion Resistant
stainless steel material compatible Applications
with up to a 3/8” hex bolt 3/4” Lift Off
7/8” clearance required between 1” Projection
the top of the panel and the ceiling
FEATURES
304 Stainless steel
1
1” projection for building
envelope applications
1 MFSSCHAN 2 MFSSCHAN
Bracket
MFSSCHAN
Material Stainless Steel
.75
Stock Clip Size 3 1/2 Inch
Stock Continuous Length 48 Inch
Custom Lengths Available Any
Lift Off (1) 3/4 Inch
1.00
Projection (2) 1 Inch
Availability Same Day Shipping .063
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall. 1.00
(631)750-3000 www.monarchmetal.com 15
MFTH-625
Specialty Z Clips
Features
Standard
Monarch Z Clip system for hanging Applications
interior panels where the installer 5/8” Lift Off
desires a 5/8” length of engagement
MONARCH Z CLIPS
1/4” Projection
3/4” clearance required between the
top of the panel and the ceiling
FEATURES
6063-T6 Aluminum
MFTH-625
MFCUSTOM-625
Panel
Wall
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
MONARCH
Custom Lengths Available Any
5/8 Lift off
Lift Off (1) 5/8 Inch
Projection (2) 1/4 Inch
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall. 2” Length
16 (631)750-3000 www.monarchmetal.com
MFEXT-1250
Specialty Z Clips
Features
Standard
Monarch Z Clip system for hanging Applications
interior panels where the installer Lift Off Varies
desires a 1 1/4” or 1 3/8” projection
MONARCH Z CLIPS
1/4” Projection
3/4” clearance required between
the top of the panel and the ceiling
FEATURES
6063-T6 Aluminum
Shlm
MFPROJ-375
Panel
Wall MFEXT-1250
1.25” Projection
MFEXT-1250
Material Aluminum
Stock Clip Size Mates with
MFTH-625 or
MFPROJ-375
7/8” Lift off
Stock Continuous Length 120 Inch
Custom Lengths Available Any
Lift Off (1) 7/8 Inch
Projection (2) 1 3/8 Inch or 3/8 Inch
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
120” Length
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
(631)750-3000 www.monarchmetal.com 17
MFPROJ-375
Specialty Z Clips
Features
Standard
Monarch Z Clip system for hanging Applications
interior panels where the installer Lift Off Varies
desires a 1 3/8” projection
MONARCH Z CLIPS
1 3/8” Projection
3/4” clearance required between
the top of the panel and the ceiling
FEATURES
6063-T6 Aluminum
Shlm
MFPROJ-375
Panel
Wall MFEXT-1250
3/8” Projection
MFEXT-1250
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length Mates with
MF-EXT1250
Custom Lengths Available Any
Lift Off (1) 5/8 Inch
Projection (2) 1 3/8 Inch or 3/8 Inch 5/8” Lift off
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel. 2” Length
(2) The “Projection” is the distance that the panel
sits out from the wall.
18 (631)750-3000 www.monarchmetal.com
MFPROJ-438
Specialty Z Clips
Features
Standard
Monarch Z Clip system for hanging Applications
interior panels where the installer Lift Off Varies
desires a 7/16” projection
MONARCH Z CLIPS
1 3/8” Projection
3/4” clearance required between
the top of the panel and the ceiling
FEATURES
6063-T6 Aluminum
Shim
MF375
MFPROJ-438
Wall
Panel
7/16” Projection
MFPROJ-438
Material Aluminum
Stock Clip Size Mates with MF375-2 Clip
Stock Continuous Length 120”
Custom Lengths Available Any 5/8” Lift off
Lift Off (1) 5/8 Inch
Projection (2) 7/16 Inch
Availability Same Day Shipping
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
120” Length
sits out from the wall.
(631)750-3000 www.monarchmetal.com 19
MFSTR-050
for Undercut Anchor
Specialty Z Clips
Applications
Requiring
Features Undercut Anchor
MONARCH Z CLIPS
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch 7/16”
Lift Off
Custom Lengths Available Any
Lift Off (1) 7/16 Inch .525
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
20 (631)750-3000 www.monarchmetal.com
MFTAPE
Hidden Fastening System with 3M High Strength Tape
Features
For Glass,
Easily used for mounting phenolic, HPL & ACM Panels
ACM, aluminum, mirrors and glass panels 3/8” Lift Off
MONARCH Z CLIPS
Each 1 ft of clip is rated for 7.5 pounds 1/4” Projection
1
of shear strength using a 5x factor
Suitable for interior and exterior FEATURES
applications (examples in 3M
design guide)
1/2” clearance required between 0.063”
top of the panel and the ceiling Thick Tape
6063-T6 aluminum
(2) strips of 3M VHB architectural 1 MFTAPE
panel tape pre-applied for peel Bracket
and stick application
2 MF375 Clip
Pairs with MF375 clip for material savings
2
Redesign of clip to optimize
adhesion with tapes 5 mm
Panel
Clip can also be purchased
without 3M tape for use with your
preferred vendor of glazing tape
.250
MFTAPE
MONARCH
.375
Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
1.260
Custom Lengths Available Any
3.375
Lift Off (1) 3/8 Inch
Projection (2) .293 Inch
Availability Same Day Shipping
1.260
(1) The “Lift-Off” is the amount you need to raise the panel
over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel
sits out from the wall.
Available in Stock
Length of 144”
or Cut to Size
(631)750-3000 www.monarchmetal.com 21
MFCEIL-H Ceiling System
for Typical Conditions
Ceiling Systems - Typical Conditions
Features
MONARCH Z CLIPS
Ceiling Panel
MFCEIL-H
Material 16 Ga. Galvanized
Stock Clip Size 1 1/2 Inch
Stock Continuous Length Mates with itself
Custom Lengths Available Any
Availability Same Day Shipping
22 (631)750-3000 www.monarchmetal.com
MFCEIL-S Ceiling System
for Seismic Conditions
Ceiling Systems - Seismic Conditions
Features
MONARCH Z CLIPS
Interlocking clips prevent movement
of the panel vertically and horizontally Ceiling
Removable
Manufactured from 16 Gauge
Galvanized Steel
Available in stainless steel 3.375”
4 interlocking clips are mounted on the
back of the panel and 4 interlocking clips
are mounted to the ceiling
Ceiling Panel
MFCEIL-S
Material 16 Ga. Galvanized
Stock Clip Size 1 1/2 Inch
Stock Continuous Length Mates with itself
Custom Lengths Available Any
Availability Made to Order
(631)750-3000 www.monarchmetal.com 23
MONARCH EASY
WALL PANELEASY SYSTEM
www.monarchmetal.com/products/easy-wall-panel-system/
MONARCH
WALL PANEL SYSTEM
D ING
D I NGPEN
T PENTENT System Features
System Features .......................................
....................................... 25
20
E N PA
PAT 21
Reveal Options .......................................... 26
26
Corner & Perimeter Trim Options ...... 35
29
Glass Wall Panel System ....................... 41
Easy Wall Panel System Features
END ING
NT P
Top Edge PATE
Trim
1
• Ships from stock
Panel • Anodized in clear, black and
Fastener custom colors
Shim
1
Fast & simple installation
centered around the intuitive
Panel Monarch Z Clip System
2 2
Wall Horizontal Reveals & Edge
Fastener Trim to be punched with
Horizontal slotted holes for adjusting
Reveal into place after mounting.
MF375
Clip
Base
Wall
(631)750-3000 www.monarchmetal.com 25
Narrow Reveal
MONARCH EASY WALL PANEL SYSTEM
NARROW REVEAL
Compatible Panel
3/8”, 3/4”
Thickness
Clear, Black,
Finishes
Custom
MF375
Clip
.75"
Panel
.75"
Panel
0.1875" 0.1875"
Wall
26 (631)750-3000 www.monarchmetal.com
Linear Reveal
Compatible Panel
3/4”
Thickness
MF375
Clip
.75"
Panel
.75"
Panel
0.125” 0.125
Wall
(631)750-3000 www.monarchmetal.com 27
Recessed
MONARCH EASY WALL PANEL SYSTEM
RECESSED REVEAL
Compatible Panel
3/8”, 3/4”
Thickness
MF375
Clip
3/4"
Panel
3/4"
Panel
1/16"
Wall
1/16"
28 (631)750-3000 www.monarchmetal.com
Narrow Channel
Compatible Panel
3/8”, 3/4”
Thickness
MF375
Clip
3/4"
3/4" Panel
Panel
WALL
3/8"
Wall
3/8"
(631)750-3000 www.monarchmetal.com 29
Wide Channel
MONARCH EASY WALL PANEL SYSTEM
WIDE CHANNEL
Reveal Thickness 1”
Compatible Panel
3/8”, 3/4”
Thickness
MF375
Clip
3/4" 3/4"
Panel Panel
WALL
1" 1"
Wall
30 (631)750-3000 www.monarchmetal.com
Captured
Compatible Panel
3/8”, 3/4”
Thickness
MF250
Clip
WALL
Wall 5/16"
5/16"
3/4"
3/4" Panel
Panel
(631)750-3000 www.monarchmetal.com 31
1/2” Captured
MONARCH EASY WALL PANEL SYSTEM
1/2” CAPTURED
Compatible Panel
3/4“
Thickness
MF375
Clip
.50"
.50”
Wall
.75"
Panel
32 (631)750-3000 www.monarchmetal.com
Proud Reveal
Compatible Panel
3/4”
Thickness
.75"
Panel .25"
.25”
.25"
Wall
.25”
.75"
Panel
MF-375 Clip
(631)750-3000 www.monarchmetal.com 33
Concave Reveal
MONARCH EASY WALL PANEL SYSTEM
CONCAVE REVEAL
Compatible Panel
3/4“
Thickness
MF375
Clip
.25"
.25”
Wall
.75"
Panel
34 (631)750-3000 www.monarchmetal.com
Corner & Perimeter Trim Options
Vertical
Horizontal Edge
Reveal Trim
Edge
Trim
Vertical Outside
Reveal Vertical
Inside Corner
Reveals
Corner
(631)750-3000 www.monarchmetal.com 35
Corner & Perimeter Trim Options
MONARCH EASY WALL PANEL SYSTEM
36 (631)750-3000 www.monarchmetal.com
Corner & Perimeter Trim Options
(631)750-3000 www.monarchmetal.com 37
Corner & Perimeter Trim Option
MONARCH EASY WALL PANEL SYSTEM
38 (631)750-3000 www.monarchmetal.com
Corner & Perimeter Trim Option
(631)750-3000 www.monarchmetal.com 39
Color Options
MONARCH EASY WALL PANEL SYSTEM
for a sample.
(1) Minimum runs apply in many cases. Please call for availability & pricing.
TIGER Drylac
RAL Essentials
(101 Colors Options)
TIGER RAL
Interior & Exterior
(188 Colors Options)
TIGER RAL
Stellix Metallic &
40 (631)750-3000 www.monarchmetal.com
Glass Wall Panel System
(631)750-3000 www.monarchmetal.com 41
Glass Wall Panel System
WALL PANEL SYSTEMS
42 (631)750-3000 www.monarchmetal.com
CLADDING
Overview ....................................................
HPL Phenolic System ........................... 32 44
Stone,
ExposedFiber
Fastener
Cement
System
& ...................36
Concrete Systems .................................. 45
Concealed Fastener System ............... 37
Stainless Steel Systems ........................ 48
Concealed Bracket
& Railing Options .................................... 53
www.monarchmetal.com
- 32 -
(631)750-3000
HPL Phenolic Systems
Features
Back ventilated and drained
rain screen systems
Excellent performance and color
retention in the sun and rain
Scratch and impact resistance
Easy maintenance
CLADDING
Typical Systems
Vertical Rail
44 (631)750-3000 www.monarchmetal.com
Stone Systems
Features
Concealed and exposed façade
/ rain screen panel installation
systems
Solutions for with stone,
limestone, marble, granite,
porcelain and quartz
Systems compatible with a variety
of undercut anchors (Keil, Fischer)
CLADDING
and other solutions
Solutions for thin veneer stone
on honeycomb panels
Jacqueline Vito LoRusso Alumni & Visitor Center
Location: Buffalo State
Cannan, Alexnder & Scott
HOLT Architects
Revette Studio
Javen Construction
Typical Systems
Vertical Rail
(631)750-3000 www.monarchmetal.com 45
Fiber Concrete
Features
Concealed and exposed façade
/ rain screen panel installation
systems
Solutions for Ultra High
Performance Concrete, Glass
Fiber Reinforced Concrete and
other manufactured stone
Systems compatible with a variety
CLADDING
Location : Allston, MA
Panel Area : 7,392 ft² (686m²)
Texture : Reeds, Rough 2, Smooth
Color : White
Architect : Shepley Bulfinch
Contractor : Pre-Fab by: NRB Inc
Installation by : Sweeney Drywall Finishes Corp
Installation : Rainscreen assembly
Fasteners : Color-matched, surface SFS Face Screws
Typical Systems
Vertical Rail
46 (631)750-3000 www.monarchmetal.com
Fiber Cement
Features
Concealed and exposed façade
/ rain screen panel installation
systems
Solutions for fiber cement
panel installations
Systems compatible with a
variety of fasteners including
color matched exposed fasteners,
CLADDING
concealed undercut anchors and
concealed rivet type anchors
Typical Systems
Vertical Rail
(631)750-3000 www.monarchmetal.com 47
Stainless Steel -
MFSTR-SSCLAD
Exclusively Available
at Monarch
Features
Concealed fastener mounting system
Available in 304 and 316 stainless steel
Rail available in lengths up to 10’ in 11 Ga. and 16 Ga. stainless steel
Clips can be drilled to accommodate various fasteners for connecting the clip
to the back side of the panel, including high strength, undercut anchors
CLADDING
48 (631)750-3000 www.monarchmetal.com
Honeycomb / Sandwich
Panels with Stone Veneer
Features
Patented fastening system to
securely install honeycomb
panels in ventilated rain screen
applications
Panel bracket designed so that
the bracket is flush with the back
CLADDING
of the panel
Adjustable system from
Specialinsert is suitable for any
kind of material (honeycomb,
foam) and thickness
100
Kg
Secure installation through the combination Properly installed anchors can hold up
of a threaded insert ready to receive a bolt to 100 KG
(631)750-3000 www.monarchmetal.com 49
GFRC Insert System
Cast in Place Inserts for GFRC
Concealed fastener attachment system for GFRC panels in
back ventilated rain screen applications with the Monarch
MFSTR-LW1250 System
Cast in place insert from various sources embedded
in the GFRC panel during the casting process
Zinc and Nylon inserts available
CLADDING
MFSTR-LW1250-1.5ADJ
Panel
Sheating MFSTR-LW1250-RAIL
1.10” 1.250”
1.0000” 2.0000”
0.1250”
0.1250”
1.500”
50 (631)750-3000 www.monarchmetal.com
HPL Plankboard Panels
Features
Progressive install plankboard
system designed for HPL panels
but customizable to others
1 Inch air space behind the panel
Vent screen and hat
channel available
CLADDING
1.500”
2.250”
1.688”
Ø 0.203”
0.055” Ø 0.203”(X2)
1.000" 0.128”
(631)750-3000 www.monarchmetal.com 51
Hybrid Aluminum / WHS
(Wood Hybrid System)
Features
Geolam is manufactured in Japan
and has been available in North
America market for the past nine
years.
Zero Color-fade - What you see
today, is what you will see in 30
CLADDING
years.
Zero moisture - without moisture
in the boards the mold and
mildew cannot grow.
Zero maintenance - no need to
Office in Andrimont, Louvers, Belgium seal cut ends at installation, no
Architect: Beck Architect follow-up maintenance needed.
Teak, Iroko Color Stains can be removed with light
sanding.
10-year non-prorated warranty
52 (631)750-3000 www.monarchmetal.com
Concealed Bracket &
Railing Options
CLADDING
Undercut Anchor Rail Heavy Duty Rail & Stainless Steel Rail &
& Brackets (Fischer) Bracket Bracket
MFSTR-LW1250 MFSTR-1125 MFSTR-SSXHD
For concealed anchor installations For concealed anchor façade For concealed anchor façade
using Fischer Undercut Anchor panel installations panel installations in hostile
conditions
Undercut Anchor Rail & Rail & Bracket for HPL ½’’ Projection Keil
Brackets (Keil) Phenolic Panels Anchor System
MFSTR-UCRAIL 200-000-RAIL MFSTR-050
For concealed anchor installations Concealed anchor installations for Concealed fastener rail and
using Keil Undercut Anchors HPL Phenolic Panels bracket for Keil Anchors with
a ½’’ Projection
(631)750-3000 www.monarchmetal.com 53
Stock J Channel
1.495” 1.575”
1.0000” 2.0000”
R=0.079”(TYP.) 0.118”
0.882”
0.2500” 1.0000”
0.118”
CLADDING
0.079”
0.1250”
0.1250” 3.071”
54 (631)750-3000 www.monarchmetal.com
Hat Channel
3.25”
0.125”
1.00” 110-001 Hat Channel
1.125” 1.125”
CLADDING
1.693” 3.339”
0.118”
0.118”
0.079”
4.724”
(631)750-3000 www.monarchmetal.com 55
Wall Bracket - Vertical Rails
Thermally Isolated Wall Brackets - Vertical Rails
Features
Available punched for metal
stud or concrete wall substrate
1 ½’’ Adjustment Range to Shim
the Rail for Plumbness
Range of stock sizes available
CLADDING
Range of Adjustment
56 (631)750-3000 www.monarchmetal.com
Wall Bracket - Horizontal Rails
Thermally Isolated Wall Brackets - Horizontal Rails
Features
Available punched for metal
stud or concrete wall substrate
1 ½’’ Adjustment Range to Shim
the Rail for Plumbness
Range of stock sizes available
CLADDING
in addition to custom sizes not
listed here
Pairing L Rail or T Rail in Black
Range of Adjustment
(631)750-3000 www.monarchmetal.com 57
Stock Vent Screen
0.750”
0.5833” 1.000”
0.250”
1.000” 110-002 1”
0.125”
0.250” Vent Screen
0.625”
120.000”
0.2917”
CLADDING
120.000”
0.9640” TYP. 0.4125”
210-001 2.25” 0.4750”
0.4750”
0.4125” 0.0625”
0.4980” 1.0000”
58 (631)750-3000 www.monarchmetal.com
Stock System Closure
1.000”
1.000”
2.250”
1.000”
CLADDING
0.625”
0.625”
(631)750-3000 www.monarchmetal.com 59
Hat Channel (Vented & Non-Vented)
A
CLADDING
1.00 1.00
60 (631)750-3000 www.monarchmetal.com
Z Girts (Vented & Non-Vented)
B
CLADDING
Material : Galvanized Steel, Aluminum, & Stainless Steel
Type : Fabricated from Sheet
Std Lengths : 10’
Custom : Custom sizes available, available with ventilation
holes or without
(631)750-3000 www.monarchmetal.com 61
Z Girts with Lip (Vented & Non-Vented)
B
A
CLADDING
62 (631)750-3000 www.monarchmetal.com
C Channel (Vented & Non-Vented)
B
CLADDING
Material : Galvanized Steel, Aluminum, & Stainless Steel
Type : Fabricated from Sheet
Std Lengths : 10’
Custom : Custom sizes available, available with ventilation
holes or without
(631)750-3000 www.monarchmetal.com 63
C Channel with Lip (Vented & Non-Vented)
B
A
CLADDING
64 (631)750-3000 www.monarchmetal.com
STANDOFFS
Aluminum
Aluminum Standoffs
Standoffs ..............................
.............................. 67
49
Stainless
Stainless Standoffs
Standoffs .................................
................................ 68
50
Standoff
Standoff Barrels
Barrels ....................................... 70
...................................... 52
Standoff
Standoff Hardware
Hardware ................................. 72
................................ 54
- 57 -
Architectural Grade Materials & Finishes
STANDOFFS
66 (631)750-3000 www.monarchmetal.com
Aluminum Cap
Standart
Part No. Dia. (A) Height (B)
SO-AL-1CAP 1” 3/8”
SO-AL-1.25CAP 1 1/4” 1/2”
A SO-AL-1.5CAP 1 1/2” 1/2”
SO-AL-2CAP 2” 5/8”
B
Ordering Notes
STANDOFFS
• Note that the height of the
cap varies with the
5/16” - 18
diameter
Tapped Hole
• Custom sizes are available
• Specify threaded connector
length when ordering
Aluminum Cap
Low Profile
(631)750-3000 www.monarchmetal.com 67
Stainless Steel Cap
Standart
Part No. Dia. (A) Height (B)
SO-SS-1CAP 1” 3/8” Total (3/16” Exposed)
SO-SS-1.25CAP 1 1/4” 3/8” Total (3/16” Exposed)
B
Ordering Notes
STANDOFFS
B
Ordering Notes
• Low pr require a
.250
.495
68 (631)750-3000 www.monarchmetal.com
Stainless Steel Cap
No Stem
Part No. Dia. (A) Height (B)
SO-SS-1NSCAP 1” 3/8”
SO-SS-1.25NSCAP 1 1/4” 1/2”
B
Ordering Notes
STANDOFFS
• Please note that you are
ordering the “No Stem” cap
5/16” - 18 when ordering
Tapped Hole
• Custom heights available
• Specify threaded connector
length when ordering
Ordering Notes
.437
.188
(631)750-3000 www.monarchmetal.com 69
Aluminum Barrels
Standard
A
STANDOFFS
Ordering Notes
70 (631)750-3000 www.monarchmetal.com
Stainless Steel Barrels
Standard
STANDOFFS
B
Ordering Notes
(631)750-3000 www.monarchmetal.com 71
Mounting Hardware
Hanger Bolts
Part Number Overall Machine Thread Wood Screw
Option A HB-A 1 1/2” 5/8” 7/8”
Option B HB-B 2 1/2” 1” 1 1/2”
Option C HB-C 4” 2” 2”
Also Available
B B
A C A C
Ordering Notes
72 (631)750-3000 www.monarchmetal.com
ARCHITECTURAL
METALS
www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/
Angle:Aluminum,
Angle: Aluminum,Stainless Stainless
and
andSteel
Steel......................................................
......................................................74
56
Channel:Aluminum,
Channel: Aluminum,Stainless Stainless
and
and Steel ......................................................85
Steel ...................................................... 64
FlatBar:
Flat Bar:Aluminum,
Aluminum,Stainless Stainless
and
andSteel
Steel.......................................................
..................................................... 91
67
- 65 -
Architectural Aluminum Angle
ALUMINUM ANGLE
ARCHITECTURAL METALS
74 (631)750-3000 www.monarchmetal.com
Architectural Aluminum Angle
ALUMINUM ANGLE
ARCHITECTURAL METALS
Alloy : 6063 Aluminum
Type : Equal Legs & Unequal Legs
Std Lengths : 16', 8'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed,
(631)750-3000 www.monarchmetal.com 75
Structural Aluminum Angle
ALUMINUM ANGLE
ARCHITECTURAL METALS
76 (631)750-3000 www.monarchmetal.com
Structural Aluminum Angle
ALUMINUM ANGLE
ARCHITECTURAL METALS
Alloy : 6061 Aluminum
Type : Equal Legs & Unequal Legs
Std Lengths : 25'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed, Mirror Polished
(631)750-3000 www.monarchmetal.com 77
FABRICATED STAINLESS STEEL ANGLE
ARCHITECTURAL METALS
78 (631)750-3000 www.monarchmetal.com
STAINLESS STEEL ANGLE
Equal & Unequal Leg Steel Angle
ARCHITECTURAL METALS
Alloy : 304 or 316 Alloy
Type : Equal Legs & Unequal Legs
Std Lengths : 20'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed, Mirror Polished
(631)750-3000 www.monarchmetal.com 79
STEEL ANGLE
Equal & Unequal Leg Steel Angle
ARCHITECTURAL METALS
80 (631)750-3000 www.monarchmetal.com
STEEL ANGLE
Equal & Unequal Leg Steel Angle
ARCHITECTURAL METALS
Alloy : Mild Steel
Type
Std Lengths
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill
(631)750-3000 www.monarchmetal.com 81
ANODIZED ANGLE
Stock Anodized Angle & Shapes
ARCHITECTURAL METALS
82 (631)750-3000 www.monarchmetal.com
STAINLESS STEEL ANGLE - SHARP CORNER
Equal & Unequal Leg Stainless Angle
ARCHITECTURAL METALS
DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS
A B t A B t
(631)750-3000 www.monarchmetal.com 83
STAINLESS STEEL CHANNEL - SHARP CORNER
Stainless Sharp Corner Channel
ARCHITECTURAL METALS
84 (631)750-3000 www.monarchmetal.com
FABRICATED STAINLESS STEEL CHANNEL
ARCHITECTURAL METALS
Alloy : 304 Alloy
Type : Fabricated from Sheet
Std Lengths : Up to 10’ Lengths
Custom : Any
Finishes : Brushed, Mirror, Mill
(631)750-3000 www.monarchmetal.com 85
Aluminum Sharp Corner Channel
(“C Channel” / “U Channel”)
ARCHITECTURAL METALS
86 (631)750-3000 www.monarchmetal.com
ALUMINUM CHANNEL
Aluminum
Aluminum Association
Association Aluminum ChannelAluminum Channel
www.monarchmetal.com/products/aluminum-association-aluminum-channel/
ARCHITECTURAL METALS
6061 Aluminum
Mirror
x x x x x x
x x x x
x x x x x x
x x x x
x x x x x x
x x x x
x x x x x x
x x x x
x x x x x x
x x x x
www.monarchmetal.com
(631)750-3000 www.monarchmetal.com 87
ALUMINUM CHANNEL
American
American Standard
Standard Aluminum Channel
Aluminum Channel
www.monarchmetal.com/products/american-standard-aluminum-channel/
ARCHITECTURAL METALS
6061 Aluminum
Mirror
x x x x
x x
x x
x x x x
x x
x
x x
x
x
x x
x
x
x
x x
x
x x
x
x
x x
x
x x
x
www.monarchmetal.com
88 (631)750-3000 www.monarchmetal.com
STAINLESS STEEL CHANNEL
STAINLESS STEEL CHANNEL
www.monarchmetal.com/products/stainless-steel-channel/
Stainless Steel Channel
ARCHITECTURAL METALS
304 Alloy
x x
x x
x x
x
x x
x x
www.monarchmetal.com
(631)750-3000 www.monarchmetal.com 89
STEEL CHANNEL
MILD STEEL CHANNEL
www.monarchmetal.com/products/mild-steel-channel/
Mild Steel Channel
ARCHITECTURAL METALS
Mild Steel
x x x x
x x
x x
x
x x
x x x
x x
x x
x x
x
x x
x x x
x
x x x
x x
x x
x x
x x
x
x x
x x
x x x
x
x x
x
x
x
x
x
www.monarchmetal.com
90 (631)750-3000 www.monarchmetal.com
Aluminum Flat Bar
ARCHITECTURAL METALS
Alloy : 6063 Aluminum
Type : ASTM B 221
Std Lengths : 16', 8'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed Finish, Anodized, Mirror Polished
(631)750-3000 www.monarchmetal.com 91
Stainless Steel Flat Bar
ARCHITECTURAL METALS
92 (631)750-3000 www.monarchmetal.com
FLAT BAR
Stainless Steel Flat Bar
www.monarchmetal.com/products/stainless-steel-flat-bar/
Stainless Steel Flat Bar
ARCHITECTURAL METALS
Alloy : 304 or 316 Alloy
Type : 304 orA316
ASTM Alloy
276/479
Std Lengths : 12'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed Finish, Mirror Polished
Mirror
x x
x
x
www.monarchmetal.com
(631)750-3000 www.monarchmetal.com – 87 – 93
FLAT BAR
www.monarchmetal.com/products/stainless-steel-flat-bar/
Stainless Steel Flat Bar
Stainless Steel Flat Bar
ARCHITECTURAL METALS
x x
www.monarchmetal.com
94 (631)750-3000 www.monarchmetal.com
FLAT
BrassBAR
Flat Bar
Brass Flat Bar
www.monarchmetal.com/products/brass-flat-bar/
ARCHITECTURAL METALS
Alloy : 360 Alloy
Type : ASTM B 16
Std Lengths : 12'
Custom : Available Punched with Holes or Cut to Length
Finishes : Mill, Brushed Finish, Mirror Polished
THICKNESS
THICKNESS DIMENSION
DIMENSION THICKNESS
THICKNESS DIMENSION
DIMENSION
tt A
A tt A
1/8 x 1/8 3/16 x 3
3/16 3 1/2
1/4 4
5/16
3/8 1/4 x 1/4
1/2 5/16
5/8 3/8
3/4 1/2
7/8 5/8
1 3/4
1 1/4 7/8
1 1/2 1
1 3/4 1 1/4
2 1 1/2
2 1/4 1 3/4
2 1/2 2
3 2 1/2
3 1/2 2 3/4
4 3
3 1/2
3/16 x 3/16 4
3/8
1/2 5/16 x 5/16
5/8 3/8
3/4 1/2
7/8 5/8
1 3/4
1 1/4 1
1 1/2 1 1/4
1 3/4 1 1/2
2
2 1/2
- 69 www.monarchmetal.com 95
(631)750-3000 www.monarchmetal.com
–- 89
75 –- - (631)750-3000
DIAMOND-TREAD PLATES
www.monarchmetal.com/products/aluminum-diamond-tread-plates/
Aluminum
Aluminum Diamond-Tread Plates
ARCHITECTURAL METALS
x x
x
x x
x x
x
x x
x
x x
x
x x
x
x x
x
www.monarchmetal.com
96 (631)750-3000 www.monarchmetal.com
DIAMOND-TREAD PLATES
www.monarchmetal.com/products/stainless-steel-diamond-tread-plates/
Stainless Steel
Stainless Steel Diamond-Tread Plates
ARCHITECTURAL METALS
304 Alloy
x x
x x
x
x
x x
x x
www.monarchmetal.com
(631)750-3000 www.monarchmetal.com 97
ALUMINUM TEES ALUMINUM T BAR
www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/
SHARP CORNER
www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/
Sharp Corner Aluminum T Bar
Aluminum Tees
ARCHITECTURAL METALS
6063 Aluminum
Mirror
x x
x x
x x
x x
x x
x
x
98 www.monarchmetal.com
(631)750-3000 www.monarchmetal.com
– 92 –
ALUMINUM TEES
Structural Aluminum T BarALUMINUM T BAR
STRUCTURAL
www.http://monarchmetal.com/products/structural-aluminum-t-bar/
Aluminum Tees
ARCHITECTURAL METALS
6061 Aluminum
x x
x x
x
x x
x x
x x
www.monarchmetal.com 99
(631)750-3000 www.monarchmetal.com
– 93 –
ALUMINUM ZEES
SHARP CORNER Z BarALUMINUM Z BAR
www.monarchmetal.com/products/sharp-corner-aluminum-z-bar/
Sharp Corner Aluminum
Aluminum Zees
ARCHITECTURAL METALS
6063 Aluminum
Mirror
x x
x x
x x
x x
www.monarchmetal.com
100 – 94 – (631)750-3000 www.monarchmetal.com
ALUMINUM ZEES
STRUCTURAL ALUMINUM Z BAR
Structural
Aluminum Aluminum Z Bar
www.monarchmetal.com/products/structural-aluminum-z-bar/
Zees
ARCHITECTURAL METALS
6061 Aluminum
x x
x x
x x
x x
&
& KICK
KICK PLATES
PLATES
www.monarchmetal.com/products/kick-plates/
www.monarchmetal.com/products/kick-plates/
CornerGuards
Corner Guards.......................................
..........................................
10376
KickPlates
Kick Plates...............................................
.................................................
78
104 77
- 76 -
CORNER GUARDS
www.monarchmetal.com/products/corner-guards/
CORNER GUARDS
B 90°
Sharp
Angle
DIMENSION
DIMENSION DIMENSION
DIMENSION THICKNESS
THICKNESS PART #
PART# STANDARD
STANDART
AA B
B tt
90˚ Angle
1 1/4 x 48 x 1/16 CORN1.25x48 16 Ga Stainless Steel, Adhesive Mounted
1 1/4 x 96 x 1/16 CORN1.25x96 16 Ga Stainless Steel, Adhesive Mounted
1 1/2 x 48 x 1/16 CORN1.5x48 16 Ga Stainless Steel, Adhesive Mounted
1 1/2 x 96 x 1/16 CORN1.5x96 16 Ga Stainless Steel, Adhesive Mounted
2 1/2 x 48 x 1/16 CORN2.5x48 16 Ga Stainless Steel, Adhesive Mounted
2 1/2 x 96 x 1/16 CORN2.5x96 16 Ga Stainless Steel, Adhesive Mounted
3 1/2 x 48 x 1/16 CORN3.5x48 16 Ga Stainless Steel, Adhesive Mounted
3 1/2 x 96 x 1/16 CORN3.5x96 16 Ga Stainless Steel, Adhesive Mounted
B
90°
Rounded
Angle
Bullnose
Bullnose
3 1/2 x 48 x 1/16 BCORN3.5x48 16 Ga Stainless Steel, Adhesive Mounted
3 1/2 x 96 x 1/16 BCORN3.5x96 16 Ga Stainless Steel, Adhesive Mounted
www.monarchmetal.com 103
(631)750-3000 www.monarchmetal.com
–- -97
76–--
77 (631)750-3000
KICK PLATES
www.monarchmetal.com/products/kick-plates/
KICK PLATES
CORNER GUARDS & KICK PLATES
t
B
DIMENSION
DIMENSION DIMENSION
DIMENSION THICKNESS
THICKNESS TYPE
TYPE PART#
PART # STANDART
STANDARD
AA B
B t
24 x 34 x 18 Ga. Armor Plate KICK24x34 18 Ga Stainless, No Holes
28 x 6 x 18 Ga. Mop Plate KICK28x6 18 Ga Stainless, No Holes
28 x 8 x 18 Ga. Kick Plate KICK28x8 18 Ga Stainless, No Holes
28 x 10 x 18 Ga. Kick Plate KICK28x10 18 Ga Stainless, No Holes
28 x 12 x 18 Ga. Kick Plate KICK28x12 18 Ga Stainless, No Holes
28 x 36 x 18 Ga. Armor Plate KICK28x36 18 Ga Stainless, No Holes
28 x 42 x 18 Ga. Armor Plate KICK28x42 18 Ga Stainless, No Holes
30 x 6 x 18 Ga. Mop Plate KICK30x6 18 Ga Stainless, No Holes
30 x 8 x 18 Ga. Kick Plate KICK30x8 18 Ga Stainless, No Holes
30 x 10 x 18 Ga. Kick Plate KICK30x10 18 Ga Stainless, No Holes
30 x 12 x 18 Ga. Kick Plate KICK30x12 18 Ga Stainless, No Holes
34 x 6 x 18 Ga. Mop Plate KICK34x6 18 Ga Stainless, No Holes
34 x 8 x 18 Ga. Kick Plate KICK34x8 18 Ga Stainless, No Holes
34 x 10 x 18 Ga. Kick Plate KICK34x10 18 Ga Stainless, No Holes
34 x 12 x 18 Ga. Kick Plate KICK34x12 18 Ga Stainless, No Holes
34 x 16 x 18 Ga. Kick Plate KICK34x16 18 Ga Stainless, No Holes
34 x 34 x 18 Ga. Armor Plate KICK34x34 18 Ga Stainless, No Holes
34 x 36 x 18 Ga. Armor Plate KICK34x36 18 Ga Stainless, No Holes
34 x 42 x 18 Ga. Armor Plate KICK34x42 18 Ga Stainless, No Holes
34 x 46 x 18 Ga. Armor Plate KICK34x46 18 Ga Stainless, No Holes
36 x 8 x 18 Ga. Kick Plate KICK36x8 18 Ga Stainless, No Holes
36 x 10 x 18 Ga. Kick Plate KICK36x10 18 Ga Stainless, No Holes
36 x 12 x 18 Ga. Kick Plate KICK36x12 18 Ga Stainless, No Holes
- 77 www.monarchmetal.com
104 –- 98
78 –-- (631)750-3000www.monarchmetal.com
(631)750-3000
Stainless Steel
Cladding System
(Page 47)
T
NEW PRODUC
100
Kg
Properly installed anchors can hold up
to 100 KG
www.monarchmetal.com
(631) 750-3000
100s of options in
colors and finishes
PROJECT:
Concealed Fasterner
Interior Paneling
Monarch Z Clip
WEB-19
Monarch Metal | 1700 Ocean Ave. | Ronkonkoma, New York 11779 | (631) 750 3000 | zclip@monarchmetal.com
Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 zclip@monarchmetal.com
Monarch Metal 1700 Ocean Ave Ronkonkoma, New York 11779 (631) 750 3000 zclip@monarchmetal.com