Fmea - Aiag-Vda PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Occurrence table

Detection table

Action Priority table


 An Action Priority Level of “High, Medium or Low,” based on S-O-D evaluations as indicated by the Action Priority
Tables.
 The Action Priority Tables do not establish a “risk priority” but rather a priority level for action needed to reduce the
risk of failure to function as intended.
 Every potential evaluation combination is assigned a High, Medium or Low priority according to the AP Table.
 If the AP level is High, action to improve prevention and/or detection controls (or justification on why current controls
are adequate) MUST be taken.
 If Medium, action to improve prevention and/or detection controls (or justification on why current controls are
adequate) SHOULD be taken.
 And if Low, action to improve prevention and/or detection controls COULD be taken.

Note: It is recommended that potential Severity 9-10 failure effects with Action Priority High and Medium, at minimum be reviewed
by management including any actions that were taken.

You might also like