Professional Documents
Culture Documents
Kai Tak International Airport (Closed 1998) and Hong Kong Cit Y Version 2.0 For Lockheed Martin Prepar3 D ®
Kai Tak International Airport (Closed 1998) and Hong Kong Cit Y Version 2.0 For Lockheed Martin Prepar3 D ®
Kai Tak International Airport (Closed 1998) and Hong Kong Cit Y Version 2.0 For Lockheed Martin Prepar3 D ®
AIRPORT COMMUNICATIONS
ATIS 128.2
Departure 128.5
ILS
Runw ay Length Surface ILS ID
Freq.
Aircraft do not park and taxi correctly, the runway start position is off.
This occurs when multiple “Afcad” files for the same airport exist on
your system. W hen installing any Addon Airport, a lways make sure
that you don’t have another Addon that also covers the sa me airport
and if you have an AI Traffic Addon such as MyTraffic, make sure
you disable the Afcad file(s) provided by that Traffic Addon as well.
FlyTampa-Configurator.
Ground Textures do not load and the airport appears grey or white.
This will happen if the Addon is added to the Scenery Library the
traditional way. It must be added to Prepar3D’s “add -ons.cfg”
instead, see below.
QUESTIONS AND ANSWERS
[Package.1]
PATH=C: \Prepar3D v4\FlyTampa\Airport
ACTIVE=true
REQUIRED=false
QUESTIONS AND ANSWERS
Kai-Tak has been closed since 1998 and is therefore not included in
the flight schedules of the default Flight Simulator as well as modern
AI packages such as Ultimate -Traffic, MyTraffic, W orld -of-AI etc.
Some Addon packages offer option s to create new Traffic or redirect
existing traffic from another airport, such as VHHH.
AI-Traffic jams.
This Addon must be installed into the main Prepar3D folder at first,
but it can be moved t o different location afterwards. To do so, simply
let the Installation complete, exit the FlyTampa -Configurator Tool in
case it is running and use W indows’ File Explorer to move the whole
FlyTampa folder structure from \Prepar3D v4\FlyTampa\ to another
location. It is vital that you move the whole FlyTampa folder and not
just the Airport subfolder, otherwise the FlyTampa -Configurator Tool
will no longer work. Afterwards you need to re -add the entries to
Prepar3D’s “add -ons.cfg” by running each /FlyTampa/Air port/ Add -to-
P3D.cmd or by using one of the three methods described above.
How to Uninstall.
Simply delete the folder(s) with the Addon files, usually located in:
Prepar3D v4/ FlyTampa/Airport/
Upon starting Prepar3D again, the entries for the Addons you deleted
will automatically be removed from the add -ons.cfg.
RECOMMENDED SETTINGS
The following Prepar3D settings marked green are recommended for this Addon.
RECOMMENDED SETTINGS
FlyTampa updates
http://www.flytampa.com/downloads.html
FlyTampa support
support@flytampa.com
NOTES
This product including all files contained within this package is copyright © FlyTampa
(www.flytampa.com). The information provided within this document and the FlyTampa-
Vienna scenery package is not intended for real world navigation. All trademarks and/or
logos mentioned and/or displayed within this scenery package are property of their
respective holders and are being used solely with the purpose of representing reality.
Installer developed with Nullsoft’s© NSIS©. Special Thanks go to those who supported this
Product and all beta testers including George Grimshaw, Stéphane Lepage
(FlightScenery), Manuel Babes, Marcel Widi, Bert Groner and others.