Professional Documents
Culture Documents
S@support S@midspan S@support S@midspan: Total (125 Max) DES - Score + PS - Score
S@support S@midspan S@support S@midspan: Total (125 Max) DES - Score + PS - Score
Design Requirement
A. Miscellaneous Requirements (add only when included in the documents) Score
1 Perspective Yes (+1)
2 Elevations Yes(+1) includes Front , Rear , Right Elevation, Left Elevation
3 Floor Plans Yes(+1) includes Ground, 2F, 3F, Roof/R.Deck
4 Framing Plan Yes(+1) includes 2F, 3F, Roof/R.Deck
5 Foundation Plan Yes(+1) columns number/type indicated
6 Cover Page Yes(+1) includes Title, Name of Student, May 2018
Total (6 max.), TA =
B. Analyis of Loads
1 Analysis-Live Load Yes(+3), LL Magnitude1-KPa______(+1), Lr Magnitude-KPa______(+1)
2 Analysis-Dead Load Yes(+3), Weight of Concrete-KN/cu.m______(+1), Weight of Wall-KN/m_______(+1)
3 Analysis-Earthquake Load Yes(+3), Design Base Shear-KN______(+1), Importance Factor _______(+1)
4 Analysis-Wind Load Yes(+3), Basic Wind Speed kph(+1)______(+1), Exposure Category _______(+1)
5 Analyis Combination of Load 1.2D+1.6L+0.5Lr(+2), 1.2D+1.6Lr+f1L(+1), 1.2D+1.0W+f1L+0.5Lr(+1), 1.2D+1.0E+f1L(+1)
Total (25 max.), TB =
C. Design of members
1 T-Beam Yes(+2), ΦMn = ______, Mu = ______, 1.0<(ΦMn/Mu)<1.3 (+1), a = _____(+1) ,Sketch(+1)
ΦMn = ______, Mu = ______, 1.0<(ΦMn/Mu)<1.2 (+1), es' =_____(+1), es=____ >0.004(+1), ρ
2 Doubly-Reinforced
=_____, 1.4/fy <ρ< 0.025 (+1), s =_______, s > 50mm(+1)
ΦMn = ____, Mu = ______,h =_____, hmin =_____, s = _____, smax =_____, ρg =____, ρgmin=____
3 One-Way Slab
1.0< ΦMn/Mu (+1), h ≥ hmin(+1), s ≤smax (+1), ρg>ρgmin(+1) ,temp.bars s =_____(+1)
ΦMn = ____, Mu = ______,h =_____, hmin =_____, s = _____, smax =_____, ρg =____, ρgmin=____
4 Two-Way Slab
1.0< ΦMn/Mu (+1), h ≥ hmin(+1), s ≤smax (+1), ρg>ρgmin(+1) , middle strip Mu =_____(+1)
12 Development length Calculations Bar db =_____, Ld = ____(+1), Ldh =____(+1), Ldc =______(+1), lap length=______(+1), Sketch(+1)
We certify on our honor that the fill-in information provided in this sheet is accurate, true, and based from the submitted Design and PS of the owner.
Prepared by : _____________________________________________
(Signature over Printed Name---Owner)
Checked by: _____________________________________________
(Signature over Printed Name)
Verified by: _____________________________________________
(Signature over Printed Name)