Professional Documents
Culture Documents
Leaflet
Leaflet
Leaflet
SUBMERSIBLE
DEWATERING PUMPS
For
Construction &
Other
Industries
CORROSION/ABRASION RESISTANT HEAVY DUTY CASTINGS
IMPELLER FOR LAST LONG
All KPR`S impellers are design to keep
working under extremely harsh conditions. All KPR`S pump models are constructed
They are produced in stainless steel 410 of strong die cast aluminum top cover &
grade and machined in our own machine bottom cover with sand blasted and
shop to exacting specifications and epoxy coated for last long.
finished to very high hardness levels.
Hardness reduces wear for continued high
performance.
P
PUUM
MPPM
MOOD
DEELL A
AKK--11..55335500--22P
P TTEEC
CHHN
NIIC
CAALL SSP
PEEC
CIIFFIIC
CAATTIIO
ONN
PERFORMANCE CURVE
AK-1.5350-2P
20
18
16
Head in Meter in
14
12
10
8
6
4
2
0
0 100 200 300 400 500
Discharge in LPM
INTRODUCTION:
KPR`S dewatering submersible pumps, known for job site
Mechanical Seal :
dependability. Pumps are constructed of strong die cast
Double seals of Inner & Outer Tungsten
aluminum and stainless steel body parts; they are fitted
with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and
enclosed in oil chamber.
lower mechanical seals are wholly enclosed in oil
chamber. These tough pumps do not have to be totally Materials:
submerged and will operate under snore conditions if Casted Parts : Aluminum Alloy
necessary. Outer Casing/
Motor Casing : Aluminum Alloy
Model No. : AK-1.5350-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
1.5 HP (1.1KW)/3Ø/50Hz/415Volt, 2800 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Oil Chamber : Aluminum Alloy
motor, insulation Class F (155
0
C). Diffuser : Aluminum Alloy
Also Available in Single Phase 220 Volt. Strainer : Stainless Steel with circular
holes of 6mm X 6mm.
P
PUUM
MPPM
MOOD
DEELL A
AKK --33335500--22P
P TTE
ECCH
HN CA
NIIC ALL S
SPPE
EC CA
CIIFFIIC ATTIIO
ONN
PERFORMANCE CURVE
AK-3350-2P
20
18
16
Head in Meter in
14
12
10
8
6
4
2
0
0 200 400 600 800 1000 1200 1400
Discharge in LPM
INTRODUCTION:
KPR`S dewatering submersible pumps, known for job site
Mechanical Seal :
dependability. Pumps are constructed of strong die cast
Double seals of Inner & Outer Tungsten
aluminum and 304 stainless steel body parts; they are
fitted with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and
enclosed in oil chamber.
lower mechanical seals are wholly enclosed in oil
chamber. These tough pumps do not have to be totally Materials:
submerged and will operate under snore conditions if Casted Parts : Aluminum Alloy
necessary. Outer Casing/
Motor Casing : Aluminum Alloy
Model No. : AK-3350-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
3HP (2.2KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Oil Chamber : Aluminum Alloy
motor, insulation Class F (155
0
C). Diffuser : Aluminum Alloy
Also Available in Single Phase 220 Volt. Strainer : Stainless Steel with circular
holes of 6mm X 6mm.
Full Load Current:
Limitations: Max. Submergence depth-10 Mtr.
5.4 Amps @ 415 Volt/3Ø/50Hz Ac Supply
Min. Submergence depth – 6” Inch.
0
Max. Liquid Temperature-40 C.
Start/Stop: Max.15 per hour.
* These pumps must be used with external motor
Discharge Connection: protection in accordance with technical data.
3 ”Aluminium, Hose type.
Weight: 35 KG (Approx) without Cable
Power Cable:
15 meter, Water proof EPR insulated, flexible
power cable of size 4 Core X 2.5 sq.mm. (Due to continues product development, Specifications may be
* Use rated current when sizing control equipment. subject to change without notice.)
KPR`S ELECTRIC SUBMERSIBLE
“THE NAME BEHIND PUMP PERFORMANCE”
DEWATERING PUMP
P
PUUM
MPPM
MOOD
DEELL A
AKK --66335500M P TTE
M||LL--22P ECCH
HN CA
NIIC ALL S
SPPE
EC CA
CIIFFIIC ATTIIO
ONN
PERFORMANCE CURVE
AK-6350M/L-2P
30
25
AK-6350M-2P
Head in Meter
20
15
10
AK-6350L-2P
0
0 300 600 900 1200 1500 1800 2100 2400
Discharge in LPM
INTRODUCTION:
Mechanical Seal :
KPR`S dewatering submersible pumps, known for job site
Double mechanical seals (Inner & Outer) in
dependability. Pumps are constructed of strong die cast
aluminum and stainless steel body parts; they are fitted
Tandem arrangement. Seal faces are Tungsten
with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and enclosed in stainless steel oil chamber.
lower mechanical seals are wholly enclosed in stainless
steel oil chamber. These tough pumps do not have to be Materials:
totally submerged and will operate under snore conditions Casted Parts : Aluminum Alloy
if necessary. Outer Casing/
Motor Casing : Stainless Steel
Model No. : AK-6350M\L-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
6 HP (4.5KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Oil Chamber : Stainless Steel
motor, insulation Class F (155
0
C). Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular
holes of 10mm X 10mm.
Full Load Current:
9.8 Amps @ 415 Volt/3Ø/50Hz Ac Supply
Limitations: Max. Submergence depth-10 Mtr.
0
Max. Liquid Temperature-40 C.
Start/Stop: Max.15 per hour.
* These pumps must be used with external motor
Discharge Connection: protection in accordance with technical data.
4”Stainless Steel, Hose type.
Weight: 45 KG (Approx) without Cable
Power Cable:
15 meter, Water proof EPR insulated, flexible
power cable of size 4 Core X 2.5 sq.mm. (Due to continues product development, Specifications may be
* Use rated current when sizing control equipment. subject to change without notice.)
KPR ELECTRIC SUBMERSIBLE
“THE NAME BEHIND PUMP PERFORMANCE”
DEWATERING PUMP
P
PUUM
MPPM
MOOD
DEELL A
AKK --88335500--22P
P TTE
ECCH
HN CA
NIIC ALL S
SPPE
EC CA
CIIFFIIC ATTIIO
ONN
PERFORMANCE CURVE
AK-8350-2P
40
35
30
Head in Meter
25
20
15
10
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Discharge in LPM
INTRODUCTION:
Mechanical Seal :
KPR dewatering submersible pumps, known for job site
Double mechanical seals (Inner & Outer) in
dependability. Pumps are constructed of strong die cast
aluminum and stainless steel body parts; they are fitted
Tandem arrangement. Seal faces are Tungsten
with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and enclosed in stainless steel oil chamber.
lower mechanical seals are wholly enclosed in stainless
steel oil chamber. These tough pumps do not have to be Materials:
totally submerged and will operate under snore conditions Casted Parts : Aluminum Alloy
if necessary. Outer Casing/
Motor Casing : Stainless Steel
Model No. : AK-8350-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
8HP (6KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Oil Chamber : Stainless Steel
0 Diffuser : Nitrile Rubber Coated
motor, insulation Class F (155 C).
Strainer : Stainless Steel with circular
holes of 10mm X 10mm.
Full Load Current:
13 Amps @ 415 Volt/3Ø/50Hz Ac Supply
Limitations: Max. Submergence depth-15 Mtr.
0
Max. Liquid Temperature-40 C.
Start/Stop: Max.15 per hour.
* These pumps must be used with external motor
Discharge Connection: protection in accordance with technical data.
4”Stainless Steel, Hose type.
Weight: 57 KG (Approx) without Cable
Power Cable:
15 meter, Water proof EPR insulated, flexible
power cable of size 4 Core X 4 sq.mm. (Due to continues product development, Specifications may be
* Use rated current when sizing control equipment. subject to change without notice.)
KPR ELECTRIC SUBMERSIBLE
“THE NAME BEHIND PUMP PERFORMANCE”
DEWATERING PUMP
P
PUUM
MPPM
MOOD
DEELL A
AKK --1100335500--22P
P TTE
ECCH
HN CA
NIIC ALL S
SPPE
EC CA
CIIFFIIC ATTIIO
ONN
PERFORMANCE CURVE
AK-10350-2P
40
35
30
Head in Meter
25
20
15
10
0
0 400 800 1200 1600 2000 2400 2800 3200
Discharge in LPM
INTRODUCTION:
Mechanical Seal :
KPR dewatering submersible pumps, known for job site
Double mechanical seals (Inner & Outer) in
dependability. Pumps are constructed of strong die cast
aluminum and stainless steel body parts; they are fitted
Tandem arrangement. Seal faces are Tungsten
with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and enclosed in stainless steel oil chamber.
lower mechanical seals are wholly enclosed in stainless
steel oil chamber. These tough pumps do not have to be Materials:
totally submerged and will operate under snore conditions Casted Parts : Aluminum Alloy
if necessary. Outer Casing/
Motor Casing : Stainless Steel
Model No. : AK-10350-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
10 HP (7.5KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Oil Chamber : Stainless Steel
motor, insulation Class F (155
0
C). Diffuser : Nitrile Rubber Coated
Strainer : Stainless Steel with circular
holes of 10mm X 10mm.
Full Load Current:
16 Amps @ 415 Volt/3Ø/50Hz Ac Supply
Limitations: Max. Submergence depth-15 Mtr.
0
Max. Liquid Temperature-40 C.
Start/Stop: Max.15 per hour.
* These pumps must be used with external motor
Discharge Connection: protection in accordance with technical data.
4”Stainless Steel, Hose type.
Weight: 65.5 KG (Approx) without Cable
Power Cable:
15 meter, Water proof EPR insulated, flexible
power cable of size 4 Core X 4 sq.mm. (Due to continues product development, Specifications may be
* Use rated current when sizing control equipment. subject to change without notice.)
KPR`S ELECTRIC SUBMERSIBLE
“THE NAME BEHIND PUMP PERFORMANCE”
DEWATERING PUMP
P
PUUM
MPPM
MOOD
DEELL A
AKK --1155335500--22P
P TTE
ECCH
HNNIIC
CAALL S
SPPE
ECCIIFFIIC
CAATTIIO
ONN
PERFORMANCE CURVE
AK-15350-2P
70
60
Head in Meters
50
40
30
20
10
0
0 600 1200 1800 2400 3000 3600 4200 4800
Discharge in LPM.
INTRODUCTION:
Mechanical Seal :
KPR`S dewatering submersible pumps, known for job site
Double mechanical seals (Inner & Outer) in
dependability. Pumps are constructed of strong die cast
aluminum and stainless steel body parts; they are fitted
Tandem arrangement. Seal faces are Tungsten
with stainless steel hardened impellers and field
Carbide Vs Tungsten Carbide and are wholly
adjustable nitrile rubber diffuser. The both upper and enclosed in oil chamber.
lower mechanical seals are wholly enclosed in oil
chamber. These tough pumps do not have to be totally Materials:
submerged and will operate under snore conditions if Casted Parts : Aluminum Alloy
necessary. Outer Casing : Stainless Steel
Motor Casing : Aluminum Alloy
Model No. : AK-15350-2P Motor Shaft : Stainless Steel
Impeller : Stainless Steel, Hardened
Motor Rating: (HRC-55)
15 HP (11KW)/3Ø/50Hz/415Volt, 2850 RPM DOL Fasteners : Stainless Steel
Start squirrel cage continuous rated induction Diffuser : Nitrile Rubber Coated
motor, insulation Class F (155
0
C). Strainer : Stainless Steel with circular
holes of 30mm.
Full Load Current:
Limitations: Max. Submergence depth-15 Mtr.
24 Amps @ 415 Volt/3Ø/50Hz Ac Supply
Min. Submergence depth- 100mm.
0
Max. Liquid Temperature-40 C.
Start/Stop: Max.15 per hour.
* These pumps must be used with external motor
Discharge Connection: protection in accordance with technical data.
6 ”Stainless Steel, Hose type.
Weight: 130 KG (Approx) without Cable
Power Cable:
15 meter, Water proof EPR insulated, flexible
power cable of size 4 Core X 4 sq.mm. (Due to continues product development, Specifications may be
subject to change without notice.)
* Use rated current when sizing control equipment.
“THE NAME BEHIND PUMP PERFORMANCE”
KPR`S PUMPS
Shed No. 5, Survey No-83,
Anant Industrial Estate,
Shivne, PUNE – 411 023
Tel. No. : +91-20-60709991,
Fax: +91-20-30221974,
Mob. : +91-8149135652,
U.A.E.: +97150-2373804,
Email. : ashwin@kprspumps.com
Web: www.kprspumps.com