Professional Documents
Culture Documents
Flexcrete Ductile Overlay PDF
Flexcrete Ductile Overlay PDF
Flexcrete Ductile Overlay PDF
Compressive 35 - 60 MPa
Strength
Tensile Strength 5 - 6 MPa
Flexural Strength 12 –15 MPa (from thin specimens)
Tensile Ductility 4 – 2 % (lower ductility for higher strength)
Crack Opening at 40 – 60 micron
Peak Tensile Stress Tensile Behavior of Flexcrete-WP
-11
Water Permeability - 1.2 - 1.5 x 10 g/Pa/hr/m
uncracked
Water Permeability – Same as Uncracked Flexcrete-WP
3% strain
Method of Application direct casting with or without vibration,
Multiple Cracking of
Flexcrete-WP with Crack
Spacing of 1-2mm, Crack
Opening is below 60
microns when the tensile
strain is up to 3%
Permeability can stay very
low at large deformation
APPLICATION – FLEXCRETE-WP