Professional Documents
Culture Documents
Electric Motorcycle Kit Components
Electric Motorcycle Kit Components
1. Motor - ME0909 - Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW
(6.4HP) continuous and 15 KW (20.1HP) for 30 seconds. Over 100 inch/pounds torque and 4000+ rpm. For
voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds)
(Fully programmable with regenerative braking available upon request- additional $50)
3. Throttle – Wrist twist, Hall-sensor type (foot throttle available at no extra cost)
4. Mounting Plate (Laser cut to match the motor. Half round shape--weld or bolt in place)
5. Sprocket or Coupler -(specify chain size for sprocket. Coupler is 7/8” w/ 3/16 keyway)
6. Safety Disconnect Switch - 500 amps
7. Amp Meter 0 - 150 ADC
8. Volt Meter 0 - 100 VDC
9. Amp Shunt - 50mv – 200 Amp
Use this tried and tested kit to make your Motorcycle, Scooter, Boat, 4-wheeler, ATV, Riding
Lawnmower, Small Tractor or Snowmobile run on Electric Power! Speeds up to 45 MPH,
range dependent on batteries and speed/load(approx. 10-20 miles per 100amp/hr –12vdc
lead battery)-- Recharge it anywhere for free, with just two Solar Panels!!