{i TBS INSPECTION AS
tbsinspection
When quality means everything
+ ® english
VT, PT, MT, UT, RT, IWI-C and IWE
Visual inspection (VT)
Visual inspection means that the inspector checks the surfaces of welded connections, machined
components or materials of varying types after the customers needs and wishes. Visual inspection is
performed in accordance with specific procedures and acceptance criteria.
Often, the visual inspection method alone is not good enough. One or more of the following NDT methods
mentioned further below, is often used as an addition inspection method to ensure full coverage of the
object's scope
Penetrant Testing (PT)
Penetrant Testing is a surface control, which reveals defects / indications that are open up to the surface of
the test object. Often used for machined parts, and on non-magnetic materials where the magnetic particle
method is not a possibility.
Magnetic Particle (MT)
Magnetic powder is a method for detecting defects / indications of an object's surface. This method is very
good on rough surfaces, the method is limited to materials with good permability. Non- magnetic materials
can’t be controlled with magnetic powder, in those cases the use of Penetrant Testing will be
recommended
Ultrasonic (UT)
Ultrasound is often a used method to detect internal defects / indications in welds and other objects,
especially good on thicker materials where radiography is limited or not possible. Ultrasound is often used
for testing of steel, aluminum, plastics, composite materials and cast objects
Radiography (RT)
Radiography is the method most often used for checking a weld connection or an object of internal errors /
indications and volume errors. Radiography can be performed in two different ways, by X-ray with an x-ray
tube, or by gamma used by an isotope.
Phased Array (PAUT)In the industrial context PAUT is used including weld inspection , corrosion control and thickness
measurement. Because of the ability to control parameters such as angle , focus, and width of the beam ,
this method is very effective in error detection and the speed of testing.
Castings (UT)
Offshore: Most of our inspectors are offshore-certified.
IWE-C og IWE
International Welding Inspector — Comprehensive Level
International Welding Engineer
Nyheter
TBS Inspection AS - @ysandvegen 143 - 7224 Melhus - tif: +47 950 56 271 - Orgnr. 995 152 746 MVA-
Webmail
Multilingual WordPress by ICanLocalize
een 22