Professional Documents
Culture Documents
FC81081
FC81081
FC81081
SPECIFICATION GUIDE:
Tubing Size (In.) 2-7/8 3-1/2 3-1/2 4-1/2 4-1/2
(mm ) 73,0 88,9 88,9 114,3 114,3
Seal Bore (In.) 2.31 2.75 2.81 3.43 3.68
(mm ) 58,7 69,9 71,4 87,1 93,6
*Minimum OD (In.) 3.75 5.31 5.31 6.500 6.500
(mm ) 95,2 134,8 134,8 165,1 165,1
Shear Value Brass 1,027 573 573 415 415
per Screw + - 15%
to Open Steel 1,387 773 773 560 560
Outer Sleeve + - 20%
Maximum Brass 4,108 3,438 3,438 3,320 4,150
Do not exceed differential pressure of 5,000
Shear Value + - 15% w/ 4 screws w/ 6 screws w/ 6 screws w/ 8 screws w/ 10 screws psi across outer sleeve before being shifted
with number Steel 5,548 4,638 4,638 4,480 4,480 with tubing pressure. To open and close
inner sleeve, use same shifting tools as the
of Screws + - 20% w/ 4 screws w/ 6 screws w/ 6 screws w/ 8 screws w/ 8 screws standard “CM” series sleeves.
Max Working Temp (°F) 375 375 375 325 325
Notice: Special “CMPA” Sleeve designed
Max Working Pressure (psi) 10,000 10,000 10,000 10,000 10,000 for annulus shear and tubing testing can
be special ordered: “CMPA”,
Tensile Strength (lbs) 140,000 182,000 182,000 270,000 270,000
Product No. 810-81.
*Cannot be turned down below this dimension.
™
© 1996 Baker Hughes Incorporated. All rights reserved.
PR/FC/96006/3M/1-96
PRODUCT REPORT
January 1996 Page 2 of 2 A Ba ker Hughes c om pany
™
© 1996 Baker Hughes Incorporated. All rights reserved.
PR/FC/96006/3M/1-96