Professional Documents
Culture Documents
Web Setting of JE106 Ethernet Converter
Web Setting of JE106 Ethernet Converter
1、 Connection device
Connect the JE106 Ethernet converter with the computer by
Ethernet network
Click the equipment to open it, it will show you like follows
If the equipment and the HTTP are both OK then the light of Running
Status will twinkle with the same frequency as the green LED on the
equipment. If the equipment is connected with a remote server, the
light of the Online Status will turn red, and the Input Port will show high
level.
3、 Setting
Click the Configuration button and the user name is “admin”, password
is “admin”
Make sure the setting is all right and click the Save Config button. And
enter the restart page then the equipment will restart and will running
with the new Parameters