Professional Documents
Culture Documents
Water Spray Test - Slow & High Pressure Test: Schaeffler India 21.08.2020
Water Spray Test - Slow & High Pressure Test: Schaeffler India 21.08.2020
Water Spray Test - Slow & High Pressure Test: Schaeffler India 21.08.2020
Schaeffler India
21.08.2020
All rights reserved to Schaeffler Technologies AG & Co. KG, in particular in case
of grant of an IP right.
Water spray test
8/21/2020 Presentation title All rights reserved to Schaeffler Technologies AG & Co. KG, in particular in case 2
of grant of an IP right.
Water spray test
Test setup:
Test conditions:
• Test the sample (SSC) for one hour at the temperature of 25C.
• Spray water in every directions in accordance with the table below at an ambient temperature of 25C.
• Leave the SSC for one hour at an ambient temperature of -30C.
• Stroke SSC 10 times at an ambient temperature of -30C with recording the pressure of brake fluid.
Spray conditions:
• Water pressure at spray nozzle position :30 cm away from the tested part
• Water spray bar : 8 MPa Profile:
• Total water amount : 600 (L/h)
• Test time : 150 (s)(All direction (A~E)→ shown in the pic.×3roundtrips)
• Speed: 10(s)/1roundtrip
Acceptance criteria:
• Pressure of brake fluid at temperature at -30C must be 64 bar max.
• Assembly condition of the boot must be same as one before tested.
• No damage allowed in the Semi slave cylinder (SSC).
8/21/2020 Presentation title All rights reserved to Schaeffler Technologies AG & Co. KG, in particular in case 3
of grant of an IP right.
Thank You
03.02.2020 Forum of Inspiration India - 2020 (Hosur) / R&D Testing All rights reserved to Schaeffler Technologies AG & Co. KG, in particular in case 4
of grant of an IP right.