Professional Documents
Culture Documents
Emergency Lighting PDF
Emergency Lighting PDF
Lighting
System
10 ft
50 ft
10 ft
50 ft
10 ft
50 ft
10 ft
50 ft
In this example:
CIRCUIT 1st Emergency Circuit Load Wattage: Six 9W remote heads plus five
1W Exit=(6 x 9W)+(5 x 1W)=59W
2
2nd Emergency Circuit Load Wattage: Seven 9W remote heads plus one
1W Exit=(7 x 9W)+(1 x 1W)=64W
3rd Emergency Circuit Wattage: Six 9W remote heads = (6 X 9W) = 54W
CIRCUIT CIRCUIT
Circuits 1,2,3 would require a 72 emergency load watts as per the chart.
1 Emergency DC voltage=12V. Emergency circuit wire gauge=12-gauge.
3 Chart shows a maximum wire run distance of 29 ft needed on each circuit.
In this example :
Three 12V - 72W Battery Units will be used, one for each of the 3 circuits identified:
Circuit 1: Total Load was 59W and would require a Battery Unit with a 72W capacity
Circuit 2: Total Load was 64W and would require a Battery Unit with a 72W capacity
Circuit 3: Total Load was 54W and would require a Battery Unit with a 72W capacity
SEN 6V 50 (6V) C:Commercial 0 S: Standard 1 9T: 9W Tungsten TB: Terminal Block 1: 120 V
12V 72 (6V) 1 M: Mini 1 18T: 18W Tungsten P: Twist Lock Plug 6: 347 V
24V 100 (6/12V) 2 D: Designer 2 8Q: 8W Quartz
150 (6/12/24V) 3 12Q: 12W Quartz
180 (6V) 20Q: 20W Quartz
200 (12/24V) 50Q: 50W Quartz
250 (12V) 55Q: 55W Quartz
Features
300 (12/24V) 70Q: 70W Quartz
350 (24V) M10: 10W Medium MR16 • Built-In Liquid Crystal Display (LCD) and Audible
360 (12V) W10: 10W Wide MR16 Alarms: Alert maintenance personnel and occupants to
400 (24V) N20: 20W Narrow MR16 the unit’s operational status including warning and error
550 (24V) M20: 20W Medium MR16 messages in English
720 (24V) W20: 20W Wide MR16
• Text Messages: Lamp Fail, Battery Missing, Battery
N35: 35W Narrow MR16
Discharged, AC Line Fail, Line Fuse Fail, Load Fuse
M35: 35W Medium MR16
Fail, Calibration Required, 24 hrs./30 Day/6 Month Test
W35: 35W Wide MR16
N42: 42W Narrow MR16
Failed, AC Line Voltage, Battery Low, Duration of Last
M42: 42W Medium MR16
AC line Failure, Float Charge, High Rate Charge, Last
W42: 42W Wide MR16 AC Line Failure, Last Load On, Last Load Duration, Line
N50: 50W Narrow MR16 Restore Delay, Next Test
M50: 50W Medium MR16 • Self-Testing: Reduces maintenance costs and ensures
W50: 50W Wide MR16 proper system operation with automatic self-tests
1
– 24 Hour Test: a 30 second Battery Discharge detects
Mini: 6 Volt (9T, 8Q, 12Q); 12 Volt (9T, 8Q, 12Q, 18T, M10, W10, N20, M20, W20, N35, M35, W35) ; 24 Volt (9T, 18T, W20,
lamp or battery failures
W35); Standard: 6 Volt (9T, 8Q, 12Q, 20Q); 12 Volt (9T, 8Q, 12Q, 18T, 20Q, 50Q, 55Q); 24 Volt (9T, 18T, 20Q, 50Q, 70Q)
2 Designer lamp head uses an MR16 lamp with following wattages: 12V/10W in Medium or Wide; 12V (20W, 35W, 42W, 50W in – 30 Day Test: a 15 minute Battery Discharge exercises
Narrow, Medium or Wide); 24V (20 W Wide, 35W Wide, 50W Narrow or Wide) the battery
– 6 Month Test: a Full Battery Discharge tests the bat-
tery capacity
Dimensions • Self-Monitoring: With Text Messaging (in English):
Built-in 16-character Liquid Crystal Display (LCD) and
audible alarms alert maintenance personnel and occu-
pants to the unit's operational status, including warning
and error messages
15"
Cabinet for the: • Self-Conditioning: Exercises the battery regularly and
(381 mm) - 6V Sentry prolongs battery life using the following Battery Charging
-12V Sentry (up to 200 output watts) methods: Constant Current Hi Rate Charge, Controlled
-24V Sentry (up to 400 output watts) Voltage Float and Temperature Compensated Charging
• 15 Minute Time Delay: To avoid dark conditions
when utility power is restored and HID lighting attempts
to re-ignite
• Housing: Steel Cabinet constructed of 18-gauge steel.
Standard finish is Duraplex II™ White Electrostatic
Powder Coat. Knockouts are available for up to
3 lampheads
• User Interface: Two external soft-keypad push buttons
are used for menu navigation and test results initiation.
Single push button switch mounted on the circuit board
is used to access service menu
17"
Cabinet for the:
(432 mm) -12V Sentry (250 to 360 output watts) • Lamp Heads: The Medium size cabinet is provided with
Mini Remote Heads (M) and the Large cabinet is pro-
-24V Sentry (550 to 720 output watts)
vided with Standard Remote Heads (S)
• Stored Results: For fire and safety inspectors: Users
can access various information and test results via the
front panel display using system switches from menu
navigation
• Ammeter and Voltmeter Measurements: Are eas-
ily retrievable from the menu
• Mounting: The unit can be mounted on a standard
junction box or by two keyhole slots. Optional shelf
mounting is also available
• Battery: Maintenance-free sealed lead calcium battery
with a standard 10-year prorated warranty
Architectural Commercial Industrial
Application Application Application • CSA C22.2. No.141 certified
Philips Canlyte Lighting Resource Guide 695
Safety Lighting Systems – Fusion
Philips Lightolier
concealed architectural
Wall –
Series Housing Finish Voltage
Features
• Concealed Emergency Lighting: Fusion is a high Dimensions
performance, recessed emergency lighting system with
an aesthetically pleasing trim that can be integrated into Front View Side View
.5" .5"
any interior space design (1.3 cm) (1.3 cm)
.56"
• Advanced Reflector System and High Perfor- 3.7" 1.4 cm) 3.7"
15.5" (9.4 cm) (9.4 cm)
mance MR16 Lamps: Provide increased spacing (39.4 cm)
criteria that can replace standard emergency lighting
systems by a 3 to 1 ratio
• Non-Moving Mechanisms Improve Dependa- 9.2" 9.2"
10.5" 14.0" (23.4 cm)0" (23.4 cm)
bility: Fusion’s optics remain concealed in emergency (26.7 cm) (35.6 cm) cm)
situations, eliminating the chance that the mechanisms
will be non-operational
• Built-In Quick Connect: Provides automatic wiring
service to the lamps and switches when the trim plate is
snapped onto the housing
Ceiling Mount Wall Mount
• Embossed Sheetrock Thickness Gauge: Provides
a guide for recessed depth installation
• Slim Line Design: Fits typical 4" wall joists
• Housing: Back Box: One piece construction, impact
resistant Lexan, 3.2 mm (1/8") thick minimum. Provided
with three 22 mm (7/8") knockouts, four slots; two
on each side, for mounting purposes, four tabs; two on
each side, for securing the front plate; metal Back Box
enclosure comes standard. Trim Plate: One piece con-
struction, impact resistant Lexan, 3.2 mm (1/8") thick
minimum. Secures to housing enclosure by integral tabs.
Standard colour is white. Provided with a LED and test
switch, two 132 mm (5-3/16") diameter holes for wall or Quick connect feature
ceiling mount lenses
• Lamp Heads: Lens: Choice of either Ceiling or Wall
Mount lenses. One piece construction of vacuum metal-
ized Lexan. Ceiling lenses are louvred for light distribu-
tion and glare control. Wall lenses are clear and textured.
Provided with integral tabs for securing to the front plate.
Two lenses of each type come standard with every unit.
Lamps: Two provided. Sealed 12V, 35W MR16 Quartz
Halogen with integrated clear glass lens
• Mounting: The unit can be mounted recessed in a ceil-
ing using bar hanger slots in the side of the housing or
suspended by wires. The unit can also be recessed wall
mounted by attaching to studs through holes provided in
sides of enclosure (4 holes)
• Charger Board: The standard charger board is a solid
state constant voltage charger with a red AC indicator
light, sealed transfer relay, fused output circuit, low volt-
age disconnect, brownout protection and a momentary
test switch
• Battery: Maintenance-free sealed lead calcium battery
with a 10-year prorated warranty
• CSA C22.2 No. 141 certified
Architectural Commercial Industrial
Application Application Application
696 Canlyte Lighting Resource Guide Philips
Fusion Safety Lighting Systems –
Philips Lightolier
concealed architectural
THE ADVANCED FUSION REFLECTOR SYSTEM AND HIGH PERFORMANCE MR16 L AMPS
Provide Superior and Measurable Illumination
The superior optical system and two 35 watt MR16 lamps provide the required horizontal illumination along egress routes. Increased spacing
criteria can replace standard emergency lighting systems by a 3 to 1 ratio. IES format photometric data files are available for use with lighting application software
to ensure that code requirements are met.
The ceiling Fusion configuration can generate an average of 1 footcandle of illumination over a 3' x 90' egress path.
Average initial footcandles at floor = 1.05 Maximum initial footcandles at floor = 4.4
Minimum initial footcandles at floor = 0.3 Maximum to minimum ratio = 14.6 : 1.0
The wall-mounted Fusion configuration can generate an average of 1 footcandle of illumination over 3' x 60' egress path.
Straight Corridor
Corner Corridor
Features
Dimensions
• Housing: Ultra-Slim extruded one-piece aluminum
12.85"
frame is 1.4" deep. Sign features a flush mounted face- [326 mm] 1.40"
[36 mm]
plate with an equidistant reveal between frame and 3.30"
[84 mm]
face. Standard finishes are Duraplex II™ (WH) White 8" 6" ø5"
[203 mm] [152 mm] [ø127 mm]
Electrostatic Powder coat. 20-gauge stamped steel
faceplate is standard with universal knockouts for direc-
tional chevrons. Letters are 6" high with 3/4" stroke. All
hardware is concealed; sign is free of light leaks 4"
[102 mm] 8-1/2"
8" [216 mm]
• Mounting: Features universal mounting for easy back- [203 mm]
28-1/4" 28-1/4"
• Illumination: Narrow distribution LEDs ensure the [718 mm] [718 mm]
2100 : 12.85" Exit U: Universel 1: One face plate W: White H: Hi Brightness D: 120/347V AC
2100S : 18.5" Sortie 2: Two face plates LB: Black LED Bar 4: 277V AC
2100B : 28.5" Exit Sortie U: Universal SS: Silver
BRA: Brushed Anodized
BBRA: Black Housing
Brushed Anodized Face
MT: Metal paint
For Wire Guard Accessory, see page 710. Features
• Housing: Ultra-Slim extruded one-piece aluminum
frame is 1.4" deep. Sign features a flush mounted face-
Dimensions plate with an equidistant reveal between frame and face.
Standard finish is Duraplex II™ (WH) White Electrostatic
12.85"
[326 mm] 1.40" Powder coat finish. 16-gauge stamped aluminum face-
[36 mm]
3.30" plate is standard with universal knockouts for directional
[84 mm]
8" 6" ø5" chevrons. Letters are 6" high with 3/4" stroke. All hard-
[203 mm] [152 mm] [ø127 mm]
ware is concealed; sign is free of light leaks
• Mounting: Features universal mounting for easy back-
wall, ceiling and end mounting. Universal J-Box mount-
4" ing knockout pattern provided on all signage
[102 mm] 8-1/2"
8" [216 mm]
[203 mm] • Illumination: Narrow distribution LEDs ensure the
18-1/2"
most even illumination of sign face and conformance
[470 mm] with C860. Low energy consumption LEDs are Dual
28-1/4" 28-1/4"
[718 mm]
120/347VAC with 6/12/24VDC. 277VAC available upon
[718 mm]
request. Two-part LED board design maximizes cool
4" operation of electronics
[102 mm]
8" 8-1/2"
[203 mm] [216 mm] • Maintenance: Tool-less access to components and
mounting. Snap fit designs for LED Bars and frame facili-
tate easy replacement and proper optic placement
• CSA 22.2 No. 250.0 Certified; C860 Compliant; Energy
Efficient consumes slightly over 1 watt
Custom Micro
Slim one-piece extruded aluminum LED signs for custom wording applications
Ordering Guide (example: MSC100C1W-1)
–
Series Message1 Mounting Faces Sign Finish Options Input Volts
1
Features Not available in 277V AC.
For Wire Guard Accessory see page 710.
• Housing: Slim 1-1/4" depth, extruded aluminum hous-
ing. Standard finish is Duraplex II™ White Electrostatic
Powder coat. Left and right directional chevrons custom
machined to match each application. Exit and Sortie let-
Dimensions
ters are 6" high with 3/4" stroke (with the exception of
MSB2.75)
MSX
• Mounting: Mounting configuration can be ceiling, back
wall, end or pendant. Mounting is not field adjustable;
ensure that the correct mounting configuration is noted
within the catalogue number at the time of ordering
• Illumination: Low power consumption LEDs with univer- Top view
sal self detecting EM and dual 120/347V AC Voltages with canopy
• CSA C22.2 No. 250.0 Certified
Stroke width
• CSA C860 Compliant
MSS
Stroke width
MSB
Stroke width
686 Blank : Exit C : Ceiling 1 : Single W : White W : White U : Universal H : High D : 120/347V AC
S : Sortie B : Backwall 2 : Double C : Clear LB : Black Brightness 4 : 277V AC
B : Bilingual R : Recessed M : Specular SS : Silver LED
ceiling BRA : Brushed
P : Pendant Aluminum
E : End
Features
• Housing: Die formed extruded aluminum construction
Dimensions finished in Duraplex II™ White Electrostatic Powder
3-1/8"
[79 mm] coat. 6" high with 3/4" stroke Exit or Sortie is silk
13-1/8"
screened onto 3/8" acrylic face. Face finish can be clear,
[333 mm] white or specular. Legend can be single or double-faced.
2-11/16"
[68 mm] Directional indicators are field removable
10-7/16" • Mounting: Configuration can be recessed ceiling, sur-
[265 mm]
face wall or ceiling, end or pendant mount. Mounting is
not field adjustable; ensure that the correct mounting
configuration is noted within the catalogue number at the
18-1/4" time of ordering
1-3/8"
[464 mm] [36 mm]
• Illumination: Low power consumption LEDs with
universal self detecting EM voltage. Optical light guide
provides uniform and bright letter illumination to meet
C860 requirements
• CSA C22.2 No. 250.0 Certified
• CSA C860 Compliant
28-1/2"
[724 mm]
–
Series 1 Mounting Faces Sign Finish Chevrons Options Input Volts
MV: Vandal Exit C: Ceiling 1: Single W: White NC: No Chevron W: Weather Proof D: 120/347V AC
MI: Industrial Exit B: Back Wall 2: Double AA: Anodized L: Left H: Hi Brightness 4: 277V AC
MVS: Vandal Sortie E: End Aluminum R: Right LED Bar 2
MIS: Industrial Sortie P: Pendant LB: Black LR: Left & Right
MVC: Vandal Custom 1 SS: Silver U: Universal
MIC: Industrial Custom 1
Features 1
Consult factory for custom wording requirements. Not applicable for 26.75" extrusion.
• Housing: One piece, slim 1-1/4" depth, extruded alu- 2
Not available in 277V AC.
minum housing. Standard finish is Duraplex II TM White
Electrostatic Powder coat. Left and right directional
chevrons custom machined to match each application Dimensions
or universal if specified. Exit and Sortie signs avail-
able in single or double face letters, are 6" high with EXIT - 12.75" [324mm]
S ORTIE - 17.38" [441mm]
3/4" stroke. Custom wording signage is available upon
request. Consult factory
• Lens: Durable, clear, impact resistant polycarbon-
ate cover that protects the fixture from vandalism 8.87"
and impact [225mm]
• Construction: 6.00"
– Weatherproof option comes with silicone gasketing for [152mm]
the end plates and canopy (ceiling and end mount),
neoprene gasket for cover plate, neoprene gasket for
back wall mount. Gasketing provides protection from
weather, dust and debris 0.75" [19mm] TYP.
– IP65 tested and approved STROKE WIDTH
– MI Industrial is constructed with standard, zinc plated,
Phillips Drive hardware
– MV Vandal is constructed with stainless steel, Phillips
Security hardware
• Mounting: Mounting configuration can be Ceiling, Back
Wall, End or Pendant. Mounting to be specified at time of
order, not field adjustable
• Illumination: Low energy consumption LED’s are
Dual 120/347VAC with 6/12/24VDC. 277VAC available
upon request
CSA C22.2 No. 250.0 Certified
C860 Compliant
combination units
6V & 12V Steel/Aluminum Combination Unit
Ordering Guide (example: 6V362000S2S9TH-D)
–
DC Capacity Sign Sign # of Lamp Lamp Watt Options AC Finish
Vol. (1/2 hour) Type Type Lamp Head & Source Voltage
Heads Type
6V 36 2000: 2000 Blank: EXIT 0 S: Standard 1 9T: 9W Tungsten T: Time Delay D: 120/ Blank: White
12V 50 Series Steel S: SORTIE 1 M: Mini 1 18T: 18W Tungsten A: Autocycle 347V
72 2100: 2100 2 D: Designer 2 8Q: 12W Quartz P: Twist Lock
Series Alum. 12Q: 12W Quartz Plug (Specify Voltage)
20Q: 20W Quartz 2: Double Face 3 Features
50Q: 50W Quartz H: Hi Brightness LED Bar
55Q: 55W Quartz • Housing: Sign: Ultra-Slim extruded one-piece aluminum
M10: 10W Medium MR16 frame is 1.4" deep. Sign features a flush mounted
W10: 10W Wide MR16 faceplate with an equidistant reveal between frame
N20: 20W Narrow MR16 and face. 20-gauge stamped steel (2000) or 16-gauge
M20: 20W Medium MR16 stamped aluminum (2100) faceplace is standard with
W20: 20W Wide MR16 universal knockouts for directional chevrons. Letters
N35: 35W Narrow MR16 are 6” high with 3/4" stroke. All hardware is concealed;
M35: 35W Medium MR16
sign is free of light leaks. Battery Unit: Steel battery
W35: 35W Wide MR16
N42: 42W Narrow MR16
cabinet constructed of 20-gauge steel. Knockouts are
M42: 42W Medium MR16 available for 2 lamp heads. Battery unit has a gentle-
W42: 42W Wide MR16 contoured, composite plastic face with luminous Lexan
N50: 50W Narrow MR16 indicator strip and openings for LEDs and test switch.
M50: 50W Medium MR16 Standard finish is Duraplex II™ (WH) White Electrostatic
W50: 50W Wide MR16 Powder coat
• Illumination: Narrow distribution LEDs ensure the
1
Mini= 6 Volt (9T, 8Q, 12Q); 12 Volt (9T, 8Q, 12Q, 18T, M10, W10, N20, M20, W20, N35, M35, W35); Standard= 6 Volt (9T, 8Q, most even illumination of sign face and conformance
12Q, 20Q); 12 Volt (9T, 8Q, 12Q, 18T, 20Q, 50Q, 55Q). with C860. Low energy consumption LEDs are Dual
2 Designer lamp head uses an MR16 lamp with following wattages = 12V/10W in Medium or Wide; 12V (20W, 35W, 42W, 50W) in
120/347VAC with 6/12/24VDC. 277VAC available upon
Narrow, Medium or Wide Distributions. request. Two-part LED board design maximizes cool
3 Double faced sign is mounted in the center of the battery housing, not flush to the back of battery housing.
operation of electronics
• Mounting: The unit can be mounted on a standard
junction box top and back or by two back keyhole slots.
Dimensions Optional shelf mounting is also available. Knockouts on
top and sides facilitate conduit entry
16.79"
[427 mm]
• Lamp Heads: Lamp heads available in Mini Remote
9.16" (MR) and Standard Remote (SR). Aiming and main-
[233 mm]
tanance access is tool-less. Aiming is adjustable through
a full 355° vertically and 170° horizontally. See ordering
guide for lamp types
• Charger Board: The charger board is a current limited
13.23"
1.40" pulse charger controlled by an onboard microprocessor.
[35 mm] 13.23"
[336 mm] [336 mm] The microprocessor tests the battery 120 times a
second to ensure proper charging levels. It features dual
indicator LEDs, sealed transfer relay, single fused output
circuit, low voltage disconnect, brownout protection and
momentary AC test switch. As a factory programmable
12.85" 18.50" option the charger is available with a 15 minute time
[326 mm] [470 mm] delay and/or a monthly autocycle for battery exercising
• Battery: Battery is sealed lead calcium, maintenance-
free rechargeable battery with a standard 10-year
prorated warranty
– Battery: CSA 22.2 No. 141 Certified
– Sign: CSA 22.2 No. 250.0 Certified, C860 Compliant,
Energy Efficiency
High-capacity, high output unit equipment ideally suited for large indoor
areas, distribution centres, warehouses or big box retail stores
Ordering Guide (example: 12V360P8DN354-D)
–
DC Capacity Cabinet # of Lamp Head Lamp Watt & Source Options AC
Voltage (1/2 hour) Type Lamps Type Voltage
battery units
6V & 12V Commercial Battery
Ordering Guide (example: 12V36MM2M9T-D)
–
DC Capacity Sign # of Lamp Lamp Lamp Watt Options AC Finish
Volt. (1/2 hour) Type Heads Head Type & Source Voltage
6V 36 MM 0 S: Standard1 9T: 9 W Tungsten T: Time Delay D: 120/ Blank: White
12V 50 1 M: Mini1 18T: 18W Tungsten A: Autocycle 347V BG: Beige
72 2 D: Designer2 8Q: 8W Quartz P: Twist Lock
12Q: 12W Quartz Plug (Specify Voltage)
20Q: 20W Quartz
50Q: 50W Quartz
Features
55Q: 55W Quartz
70Q: 70W Quartz • Housing: Steel cabinet constructed of 20-gauge steel.
M10: 10W Medium MR16 Knockouts are available for 2 lamp heads. Battery unit
W10: 10W Wide MR16 has a gentle-contoured, composite plastic face with
N20: 20W Narrow MR16 luminous Lexan indicator strip and openings for LEDs
M20: 20W Medium MR16
and test switch. Standard finish is Duraplex II™ (WH)
W20: 20W Wide MR16
N35: 35W Narrow MR16
White Electrostatic Powder coat
M35: 35W Medium MR16 • Mounting: The unit can be mounted on a standard
W35: 35W Wide MR16 junction box top and back or by two back keyhole slots.
N42: 42W Narrow MR16 Optional shelf mounting is also available. Knockouts on
M42: 42W Medium MR16
top and sides facilitate conduit entry
W42: 42W Wide MR16
N50: 50W Narrow MR16 • Lamp Heads: Lamp heads available in Mini (M),
M50: 50W Medium MR16 Standard (S) and Designer (D) Styles. See ordering guide
W50: 50W Wide MR16 for lamp types. Aiming is adjustable through a full 355°
1
vertically and 170° horizontally
Mini: 6 Volt (9T, 8Q, 12Q); 12 Volt (9T, 8Q, 12Q, 18T, M10, W10, N20, M20, W20, N35, M35, W35); Standard: 6 Volt (9T, 8Q,
12Q, 20Q); 12 Volt (9T, 8Q, 12Q, 18T, 20Q, 50Q, 55Q). • Charger Board: The charger board is a current limited
2 Designer lamp head uses an MR16 lamp with following wattages: 12V/10W in Medium or Wide; 12V (20W, 35W, 42W, 50W)
pulse charger controlled by an onboard microproces-
in Narrow, Medium or Wide Distributions. sor. The microprocessor tests the battery 120 times a
second to ensure proper charging levels. It features dual
indicator LEDs, sealed transfer relay, single fused output
Dimensions circuit, low voltage disconnect, brownout protection and
momentary AC test switch. As a factory programmable
option the charger is available with a 15 minute time
delay and/or a monthly autocycle for battery exercising
• Battery: Battery is sealed lead calcium, maintenance-
free rechargeable battery with a standard 10-year pro-
16.79"
[427 mm] rated warranty
5.20"
[132 mm]
Medium & Large Commercial Battery 6V 100 C: Commercial 0 S: Standard 1 8Q: 8W Quartz T: Time Delay D: 120/ Blank: White
Unit with Standard Heads
12V 150 1 M: Mini 1 9T: 9W Tungsten A: Autocycle 347V
24V 180 2 D: Designer 2 12Q: 12W Quartz TB: Terminal Blocks
200 18T: 18W Tungsten P: Twist Lock Plug (Specify Voltage)
Features
250 20Q: 20W Quartz SD: Self Diagnostics
• Housing: 18-gauge steel cabinet with Duraplex II™ 300 50Q: 50W Quartz AM: Ammeter
White Electrostatic powder coat finish. Knockouts are 350 5Q: 55W Quartz V: Voltmeter
available for up to 3 lamp heads 360 70Q: 70W Quartz L: Laser Photoswitch
400 M10: 10W Medium MR16
• Lamp Heads: The Medium and Large cabinets are 550 W10: 10W Wide MR16
provided with white thermoplastic Mini/Standard or 720 N20: 20W Narrow MR16
Designer lamp heads M20: 20W Medium MR16
W20: 20W Wide MR16
• Mounting: The unit can be mounted on a standard N35: 35W Narrow MR16
junction box or by two keyhole slots. Optional shelf M35: 35W Medium MR16
mounting is also available W35: 35W Wide MR16
N42: 42W Narrow MR16
• Charger Board: The standard charger board is a
M42: 42W Medium MR16
solid state pulse charger with dual indicator lights,
W42: 42W Wide MR16
sealed transfer relay, dual fused output circuit, low volt- N50: 50W Narrow MR16
age disconnect, brownout protection and momentary M50: 50W Medium MR16
test switch W50: 50W Wide MR16
• Battery: Maintenance-free rechargeable sealed lead 1
Mini: 6 Volt (9T, 8Q, 12Q); 12 Volt (9T, 8Q, 12Q, 18T, M10, W10, N20, M20, W20, N35, M35, W35) ; 24 Volt (9T, 18T, W20,
calcium battery with a standard 10-year prorated
W35); Standard: 6 Volt (9T, 8Q, 12Q, 20Q); 12 Volt (9T, 8Q, 12Q, 18T, 20Q, 50Q, 55Q); 24 Volt (9T, 18T, 20Q, 50Q, 70Q)
warranty 2 Designer lamp head uses an MR16 lamp with following wattages: 12V/10W in Medium or Wide; 12V (20W, 35W, 42W, 50W in
• Self Diagnostic board features LEDs that indicate/detect Narrow, Medium or Wide); 24V (20 W Wide, 35W Wide, 50W Narrow or Wide)
Lamp Failure; Load Fuse, Relay or Overload; Autocycle For Wire Guard Accessory see page 710.
Battery Capacity; & High Rate Charge Time Out
• CSA C22.2 No. 141 Certified
Dimensions
Medium Cabinet
For 6 volt:
– 100, 150, 180W Capacity
– 100, 150, 200, 250, 300W Capacity
For 24 volt:
– 150, 200, 250, 300, 350, 400W Capacity
Large Cabinet
For 24 volt:
– 550, 720W Capacity
remote lighting
Ordering Guide (example: SR200112V9T))
Mini Recessed
–
Series DC Voltage Lamp Type Colour
& Wattage 1
Maxi-Lite Series delivers superior illumination and aesthetically pleasing remote lighting to
remote lighting
complement the space design
DESIGNER
Ordering Guide (example: MLD112VN20W) Recessed Round
Series # of Lamp Heads DC Voltage MR16 Lamp Wattage & Beam Type 1 Colour
Designer
MLD 1: Single 12V: 12 Volt M10: 10W Medium W35: 35W Wide W: White
2: Double 24V: 24 Volt W10: 10W Wide N42: 42W Narrow B: Black Recessed Eyeball
N20: 20W Narrow W42: 42W Wide
M20: 20W Medium N50: 50W Narrow
W20: 20W Wide N50: 50W Narrow Designer features
N35: 35W Narrow N50: 50W Narrow
• Construction: Housing constructed from 0.040" alu-
M35: 35W Medium W50: 50W Wide
minum, yoke from 0.075" steel. Die-cast aluminum step
baffle with stepped surface. Pivot mounting is tensioned
RECESSED ROUND with integral spring washer to 350° stop. Socket is two
Ordering Guide (example: MLRRIC12VN20W) pin base with no. 18 SEW-1 leads. Universal mount-
ing plate is constructed of 18-gauge cold rolled steel.
Finished in Duraplex II™ White Electrostatic Powder coat
Series DC Voltage MR16 Lamp Wattage & Beam Type 1 Colour • Mounting: Universal mounting plate for use with single
or double head applications mounts easily to standard
MLRRIC 12V: 12 Volt M10: 10W Medium W35: 35W Wide W: White
24V: 24 Volt W10: 10W Wide N42: 42W Narrow B: Black
4" x 4" J-box
N20: 20W Narrow M42: 42W Medium BR: Brass • Lamp Source: Rated for MR16 lamps up to 50 watts
M20: 20W Medium W42: 42W Wide maximum
W20: 20W Wide N50: 50W Narrow
N35: 35W Narrow M50: 50W Medium • CSA C22.2 No. 141 Certified
M35: 35W Medium W50: 50W Wide
Recessed Round features
• Construction: 3-3/4" aperture, recessed adjustable
RECESSED EYEBALL remote. Flange housing constructed from 22-gauge cold
Ordering Guide (example: MLREIC12VN20W) rolled steel. Finished in White Powder coat. 27-gauge
steel adjustable lampholder support positions lamp flush
with ceiling and rotates 358° horizontally and 0° to 30°
Series DC Voltage MR16 Lamp Wattage & Beam Type 1 Colour vertically. Patented spring clip design provides for fast
MLREIC 12V: 12 Volts M10: 10W Medium W35: 35W Wide W: White and easy snap-in/snap-out rear relamping
24V: 24 Volts W10: 10W Wide N42: 42W Narrow • Mounting: IC frame-in kit features rugged mounting
N20: 20W Narrow M42: 42W Medium system with 13" heavy gauge mounting bars that extend
M20: 20W Medium W42: 42W Wide
to 27". Accommodates all ceilings up to 1" thick
W20: 20W Wide N50: 50W Narrow
N35: 35W Narrow M50: 50W Medium • Lamp Source: Rated for MR16 lamps up to 50 watts
M35: 35W Medium W50: 50W Wide maximum
1
N: Narrow, M: Medium, W: Wide, 12 Volt (M10, W10, N20, M20, W20, N35, M35, W35, N42, M42, W42, N50, M50, W50); • CSA C22.2 No. 141 Certified
24 Volt (W20, W35, W42, W50).
Recessed Eyeball features
• Construction: 4-3/4" aperture, recessed adjustable
Dimensions RECESSED ROUND FRAME RECESSED EYEBALL FRAME eyeball. Flange housing constructed from 22-gauge
cold rolled steel. Finished in White Powder coat. Eyeball
housing is die-formed, one piece steel and provides
358° horizontal rotation and 0° to 45° vertical adjust-
9.125’’ 9.125’’ ment. Mounting clips provide for fast and easy snap-in/
DESIGNER (232mm) (232mm)
6" (152mm) X 4" (102mm) snap-out relamping. Step baffle constructed of die-cast
6” (152mm) aluminum with stepped conical surface for low bright-
ness, black finish
1” (25mm)
ø 4.5’’ TRIM
(114mm) ø 5.25’’ TRIM • Mounting: IC frame-in kit features rugged mounting
13.5’’ (133mm)
(343mm)
13.5’’ system with 13" heavy gauge mounting bars that extend
(343mm)
4-1/8” (105mm) to 27". Accommodates all ceilings up to 1" thick
RECESSED ROUND TRIM RECESSED EYEBALL TRIM
• Lamp Source: Rated for MR16 lamps up to 50 watts
maximum
3” (76mm) 1-1/4”
• CSA C22.2 No. 141 Certified
2-3/8” (60mm) 1/8” (32mm)
(3mm)
2-3/4”
(70mm)
4-1/2”
(114mm) 5-1/4”
(133mm)
Wire Guard for Remote Lighting Head Units - 4" grid Wire Guard for MSB Bilingual Sign
Catalogue Number: REM-WG Catalogue Number: EXIT-WG-MSB
O0.535
O.D
0.219 TYP 0.500 TYP
4.000
center to center
3.500
10.500
0.250 TYP
0.343 TYP
9.750 10.500
3.843
0.562 TYP
8.062
0.404 TYP
3.891 TYP
center to center
0.625 TYP 0.312
0.595 29.250
4.000 TYP 0.391 9.813
center to center 4.000 TYP
11.688
Wire Guard for Remote Lighting Head Units - 1-1/2" grid Wire Guard for Battery Units
Catalogue Number: REM-WG-HD Catalogue Number: BATT-WG-LG
O0.50
O.D. TYP
18.68" 20.63"
0.404 TYP
0.625 TYP
12.750
20.25"
10.500
0.219 TYP
0.375 TYP
0.500 TYP 19.44" 20.75"
8.000
center
1.500toTYP
center
13.06"
center
1500 to center
TYP 0.235
9.750
0.422
11.750
Wire Guard for Exit and Sortie Signs - 1-1/2" grid Battery Cabinet Shelf : The Safety Lighting Systems Battery cabinet shelf is designed
Catalogue Number: EXIT-WG to add support to the battery unit. This shelf is used with all 12/24V Medium and Large
Commercial Battery Units.
0.219 TYP 0.500 TYP
1.500 TYP
3.500 center to center
Mini Recessed Remote Standard Recessed MLRE Lamp Head MLRR Lamp Head
Lighting Remote Lighting
LAMP HEADS
6V - - - - - - - - - - - - - - - - - - -
24V - - - - - - - - - - - - - - - - - -
6V - - - - - - - - - - - - - - - - - -
24V - - - - - - - - - - - - - - - - -
12V - - - - - - - -
12V Designer (D)
24V - - - - - - - - - - - - - - - - - -
REMOTE LIGHTS
6V - - - - - - - - - - - - - - - - - - -
24V - - - - - - - - - - - - - - - - - -
6V - - - - - - - - - - - - - - - - - - -
24V - - - - - - - - - - - - - - - - - - - -
6V - - - - - - - - - - - - - - - - - -
Standard (SR)
12V - - - - - - - - - - - - - - -
Standard Recessed (SRRIC)***
24V - - - - - - - - - - - - - - - - -
12V - - - - - - - -
Maxi-Lite Serie
(MLIM, MLD, MLRE, MLRR)***
24V - - - - - - - - - - - - - - - - - -
*50 Watt Quartz is a sealed beam lamp. **Bulb is an HS base Halogen. ***Wire Guard accessory is not available for MRRIC, SRRIC, MLREIC and MLRRIC.
Guideline For Using Mini Heads and Mini Remotes (M and MR)
Photometric Diagrams
The ISO footcandle diagrams of emergency
lighting heads and remotes in this section are
designed to allow for fast and easy lighting layout
estimates. The diagrams show illumination levels
on the floor at the suggested mounting heights.
The indicated "Lamp Head Spacing" is the dis-
tance between double remotes or double heads on
battery units. For recessed heads this spacing
indicates the distance between individual lamp
heads. The standard aiming angle is 45 degrees
vertical from the floor.
For more critical situations, please consult our
factory for available IES formatted photometrics
for use in a lighting layout program to determine
accurate average and minimum emergency light-
ing levels.
photometric data
Standard Recessed Remotes (SRR)
photometric data
Maxi-Lite Recessed Round Remotes (MLRR)
Fusion Units
Dist./MH Ceiling Optics FUSCEILING
1.0
0.5
0.0
0.5
1.0