This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.
This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.
This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.
This document compares provisions for material properties, seismic design, and wind load calculations from several international codes including ECP 203-2018, ACI 318-19M, BS8110-97, EuroCode, and SBC 301. It lists equations for calculating modulus of elasticity, tensile strength, acceleration-time histories, seismic coefficients, and wind speed factors according to each code. The codes are also compared regarding definitions of ground type, site class, behavior factor, risk category, and other seismic and wind load design parameters.