Professional Documents
Culture Documents
Customer Information Sheet-KPS Engineers-17.07.2020
Customer Information Sheet-KPS Engineers-17.07.2020
Customer Information Sheet-KPS Engineers-17.07.2020
2020
Dear Customer,
In order to recommend an appropriate equipment against your requirement, please fill up this information sheet
completely. Your information shall be kept confidential. Please use separate questionnaire form for each material
to be pulverized. (Please click to select right option in shaded columns)
2.3 What is the physical form of your material before pulverizing ? : Lumpy
2.4 What is the feed size of your material Maximum Size: : 10 mm
before pulverizing? Minimum Size : : 5 mm
About 80-95% is less than size: : 10 mm
2.5 How easily your material can be broken : By Fingers
2.6 What is the powder size desired 80 % passing through : 470 Mesh BSS
:
2.7 What is the capacity desired by you ? (In terms of Kgs/Hr at feed rate) : 200 Kgs/Hr.
2.8 What is the bulk density ? Feed Material : 0.65 gms/cc
Desired Powder : 1 gms/cc
2.9 What material of construction desired ? : SS-316 GMP Grade
3 Specific information :
3.1 If material contains moisture, please Surface Moisture : NA
clarify what is the moisture content Inherent Moisture : 6-8 % in the molecule
3.2 If material is sensitive to grinding heat, Softening temperature : NA
please provide information Melting temperature : NA
Change of properties at temp. : NA
3.3 Is your Material Hygroscopic? Absorbs moisture from air : Non-Hygroscopic
3.4 Since abrasivness of your material will hamper the life of grinding elements,
Please clarify about your material Not abrsive
:
3.5 Does your material possesses any of these properties ? : None
None
: None
3.6 Please advise any precuation required for trials
No need
kaps engineers
831, GIDC, Makarpura, Vadodara- 390 010, India
Phone No: +91-265-263 2692/264 8082, Fax: +91-265-263 8448, Email: sales@kapsengineers.com
Website : www.kapsengineers.com