Professional Documents
Culture Documents
Variocontrol Lineardrive 180D: 4/6/24 A Full-Colour Dimmable Led Driver
Variocontrol Lineardrive 180D: 4/6/24 A Full-Colour Dimmable Led Driver
Applications
• Entertainment lighting • Signage/advertising lighting • Decorative lighting
• Full-colour architectural lighting • Cove lighting • Dynamic colour panel lighting
LINEARdrive 180D
Output
• Voltage: 5 V, 12 V or 24 V
• Max load per output:
RGBW @ 24 V RGB @ 24 V
General
• USITT DMX512A/RDM (ANSI E1.20) and LedSync compatible
• HydraDrive: 15-bit resolution
• Dimming control: smooth dimming from 100 % to 0.1 %, gamma-corrected curve
• Intuitive 3-button user interface for on-the-fly configuration
• Interface for external control device: 10 k Ω potentiometer, 0 – 10 V source or momentary switch
VarioControl LINEARdrive 180D – 12/09/2012
Datasheet LINEARdrive 180D
LED supply +
Group 1
30 mm/1.18” DMX in +
50 mm/1.97”
Ext in +
Ext in
Group 2
DMX in -
DMX in shield
LINEARdrive 180D Group 3
12 – 28 V/6A Direct voltage controlled LED driver
Group 4
LedSync thru +
LedSync thru -
M
10 mm/0.39” LedSync shield
153 mm/6.02”
Connections
Connectors LINEARdrive 180D
• VDC: + and -
• DMX in: +, - and shield
• LedSync thru: +, - and shield
• Ext in: + and -
• LED outputs: 4 outputs with common +
Wiring
• Cross section: 0.5 – 1.5 mm 2, AWG 20 – 16
• Strip length: 9 mm/0.35 in.
Other information
Certifications Environmental ratings
• CE • Ta range: -20°C...50°C/-4°F...122°F
• IEC 61347, EN 55015, IEC 61003, EN 61547 • Tc max: 65°C/149°F
• UL: UL Recognized Component (file no. E333135) • For use in dry locations
Control compatibility
• DMX512 A and RDM explore & address (ANSI E1.20) control gear
• Standard 0 – 10 V switch controls
VarioControl LINEARdrive 180D – 12/09/2012
VarioControl LinearDrive 180D – Wiring diagram
{
0.2 – 1.5 mm 2 0.5 – 1.5 mm 2
- + 2 2
R G B W
9 mm 9 mm
0.35 inch 0.35 inch
Ext in + R R R R
Ext in - Max | Vdc+
32V | Vdc- TC
LED supply +
Group 1
DMX in +
Ext in +
Ext in -
Group 2
DMX in -
LINEARdrive 180D Group 3
LedSync thru +
12-28V / 6A Direct voltage controlled LED driver
Group 4
LedSync thru +
LedSync thru -
LedSync shield
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and build-
ing codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
Compact
connector
Connecting an RGB strip and a white LED strip e.g. Wago 222
Group 4 +
Compact
connector
e.g. Wago 222
Warm white LED strip
Connecting warm white and cool white LED strips +
LED supply + -
Configuration of the LED groups: Group 1
Group 2
Warm white LED strip
+
Press M and + simultaneously, in the LED menu choose Group 3
Group 4 -
4 – 4 L and save this setting by pressing M. Cool white LED strip
+
Compact
connector
e.g. Wago 222
White LED strip
Connecting four white or self-colored LED strips +
Maximum current per output at 12 V: 1.5 A -
LED supply + -
Configuration of the LED groups:
VarioControl LINEARdrive 180D – 12/09/2012
Group 1
White LED strip
Press M and + simultaneously, in the LED menu choose Group 2
Group 3
+
-
VarioControl LinearDrive 180D – Quick Start Guide
Manual configuration Other features
M (5 sec) M + + (5 sec)
Lock driver
Set mode
SET MODE - / + LOCK - / +
NO
COLR SOFT
M SHOW M HARD
DMX
display off DALI
display off
M + +
Visual test run
LED groups
LED - / +
M + - + +
1-1L RGB
2-2L RGBW
3-3L RGBA
M 4-4L RRGB Test
2-4L RGGB
1-4L CCWW TEST
CWWW
External input R 1 sec
EXT INP - / +
G 1 sec
B 1 sec
W 1 sec
OFF
RGBW 1 sec
POTM
M 10V
R 1 sec
SWIT G 1 sec
B 1 sec
W 1 sec
Dimming curve
DIM CURV - / +
RGBW 1 sec
LOG
LIN display off
M
display off
M M M M
Reset
Intensity
Intensity
INT - / + INT - / +
DMX termination
TERM - / + Nr. of ballasts
0...255
0...255
YES X BAL
M
M M NO
M
display off
Network setup
display off
NETW SET - / + display off
AUTO
M MANU
Interpolation
INTERPOL - / +
VarioControl LINEARdrive 180D – 12/09/2012
OFF
VID
M COLR
WHIT
display off GLOW