Professional Documents
Culture Documents
Maxximo: Diagnostic Manual MAN-00129
Maxximo: Diagnostic Manual MAN-00129
An excessively low voltage (0 Volts) from the APP1 sensor Harness or Connectors
is sent to ECU.
(The sensor circuit is open or
An excessively high voltage (3.5 Volts for C04 ECU and 5.25 shorted)
for C55 ECU ) from the APP1 sensor is sent to ECU.
APP1 and APP2 signals are not synchronized Failed accelerator pedal
position sensor 1
Lamp Status
Fault Reaction
If malfunction is with APP1 and its circuit, then the engine runs with throttle till 40% with fuel quantity limitations
If both APP1 and APP2 malfunction, then engine will run at limp home mode i.e 1200 rpm
CIRCUIT
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are 22
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.