Professional Documents
Culture Documents
UserGuide actiNAS WIN LX SV V01 PDF
UserGuide actiNAS WIN LX SV V01 PDF
UserG_actiNAS_WIN_LX_SV_Ver_01
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Introduction
This manual is the operation manual for users about the storage server barebone
system actiNAS BB212-3. It mainly introduces and describes the characteristic
parameters, system configuration and installation mode of this product. This
type of storage server of actidata supports one controller module and this system
is integrated based on 2U12bay cabinet and G1DCW motherboard.
This manual is used for the reference and research for professional system
integrators and personal computer technicians. This product shall be installed
and serviced only by experienced technicians.
Manual Structure:
Page 2 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Content
Overview ...................................................................................................................................64
Page 3 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Motherboard SY201D12REH-BF
Page 4 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
SATA 12 SATA 3.0 6Gb (all of them connect to SPIB via LSI2008)
RAID 0, 1, 5, 10 (MS Windows®) RAID 0, 1, 10 (Linux)
USB Rear USB: 2 USB 3.0 ports and 1 built-in USB3.0 port
Front USB: 2 USB 2.0 ports
LED indicator Rear LED: UID LED, two-color system status indicator;
Internal plate: PWROKLED, BMC Heartbeat LED, etc
System hardware consists of three modules, namely the hard disk module,
controller module and power module; these three modules adopt the hot-plug
design, greatly reducing the cost of equipment maintenance.
Page 5 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Controller system uses the INTEL Grantley-EP platform with the latest
generation of INTEL E5-2600 V3 HASWELL and E5-2600 V4BROADWELL
CPU, and the maximum capacity of 145W
System supports four Intel I350-AM4 RJ45 Gigabit ports and two Intel
82599 SFP+ 10 Gigabit optical ports.
Page 6 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 7 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
actiNAS BB212-3 with G1DCW dual server motherboard is based on Intel X86
architecture, which uses Intel Grantley-EP platform based on Intel PCH C612
chipset, accompanied with the latest generation of Haswell E5v3 CPU, which is
compatible with Broadwell E5v4 CPU, and supports 4-channel
DDR4-1600/1866/2133/2400 ECC RDIMM/LRDIMM.
Motherboard G1DCW
Page 8 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Motherboard SY201D12REH-BF
Page 9 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Basic parameters
Chassis structure 2U
Adaption
actidata G1DCW
motherboard
Support hot-plug
Pluggable
fans
Fixed mode of
Fixed screw
cabinet
Safety
CCC, CE, FCC and ROHS
certification
Page 10 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 11 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 12 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The buttons and LED indicators on front panel are as follows, and the functions
and status of each button or light are described, as follows::
Page 13 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
ActLED(green)
Fault LED(yellow)
Status LED(blue)
1. Active LED(green)
2. Fault LED(yellow)
3. Status LED(blue)
Page 14 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Hard disk
Always on OFF OFF
in place
Hard disk
Always on OFF OFF
in place
Hard disk
Flashing 4Hz/sec OFF OFF
activity
Hard disk
Always on OFF Always on
alarm
RAID
reconstruct Always on OFF Flashing 1Hz/sec
ion
Page 15 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The main interfaces in system are distributed on the motherboard, and the
interface layout of motherboard is described as follows:
Page 16 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 17 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
D9 UID LED
Page 18 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 19 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 20 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
G1DCW-BF uses
I350-AM2;
U63 I350 1GbE network card chip
G1DCW-4BF uses
I350-AM4
Page 21 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Press the switch button to start the system, and the location is indicated by the
arrow below
This button is the switch button with two colors of system status indicators to
achieve the whole boot and shutdown; when the system is powered, press the
button to turn on the system; if the system is turned on, press this button to shut
down the system; if the host is on without system status, long press this button to
force the shutdown.
Note: After the system is plugged into the AC power supply, please
wait for the button green light, and then press the button to boot
LED LED
1Hz green
1Hz green light flashing
light flashing
Green light
Green light always on
always on
Yellow light
Yellow light always on
always on
No light No light
Page 22 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
In the hanger indicator on front panel is a power button, and press the button for
boot or shutdown,
Page 23 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
System ID indicator is designed to allow users to identify the machine with the
current operation more intuitively, and its specific location on motherboard is as
shown below: on the front motherboard labeled with D9:
In the hanger indicator on front panel is a UID button, and press the button
or click UID on the IPMI management interface to turn on or off the UID LED.
Page 24 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The network port is special for IPMI (CONN1), used for IPMI remote
management, and it is connected into switchboard with CAT5 cable and above,
also directly connected to the customer's host; it supports kilomega with
self-adaptive adjustment, but cannot be used as a service data network port. The
LED on the network port is as follows:
LED Description
Location diagram:
Page 25 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Motherboard provides four kilomega Ethernet ports (J9 and J10), the main chip
uses Intel I350-AM4, self-adaptive 1000M, 100M and 10M, 4 Gigabit Ethernet
business port, used to receive/send business data, and connected into the
interchanger via CAT5 cable and above, or directly connected to the customer's
host; the LED indicators in network port is as follows:
LED 描述
Location diagram:
Page 26 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The motherboard supports two SFP + Port (J11), and the main chip uses Intel
JL82599ES chip. The optical connectors use the 2X1 piled connector; SFP+
optical connector is defined as follows: The LED in this port is as follows:
LED 描述
Page 27 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Location diagram:
Two external USB3.0 ports (CONN1) are used to access each device of USB Type
A, such as debugging USB keyboard and USB drive, etc., and USB location is as
follows:
Page 28 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Motherboard has one USB3.0 TYPEA straight connector (USB1), used to access
USB devices, and the location is as follows:
Page 29 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
PIN1 5V
PIN2 D-
PIN3 D+
PIN4 Ground
PIN5 StdA_SSRX-
PIN6 StdA_SSRX+
PIN7 Ground
PIN8 StdA_SSTX-
PIN9 StdA_SSTX+
MH1 Ground
MH2 Ground
MH3 Ground
MH4 Ground
Page 30 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The motherboard has a built-in 3 PCI-E Slot, PCI-eX16 Slot of CPU1_SLOT1 with
the rate of PCI-eGen3 8Gb/s; CPU2_SLOT1 is also a X16 Slot, and the other one is
CPU2_SLOT2, X8 Slot with the rate of PCI-eGen3 8Gb/s.
Page 31 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The SAS Controller card can be inserted into the mainboard, used to support SAS
hard disk, and SAS adopts the PIKE card self-developed by actidata
(non-standard). The PCI-e X8 signal of CPU1 is connected to the PIKE card via
PCI-e X8 Slot. The SAS X8 signal of PIKE card is connected to mainboard via slot
of PCI-e X4. And the motherboard connects the 8 pairs of SAS signals to the SPIB
for the system backplane
Page 32 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The motherboard supports 1*M.2SSD (J23), and this M.2SSD must be PCI-e
interface type, and M.2 of SATA interface does not support this, but supports
PCI-eGen3 X4 with the backward compatibility with PCI-eGen2 or X2, X1;
according to flexible design, M.2 interface can support three kinds of
specifications of M.2SSD, 42mm, 80mm and 110mm, respectively; the machine
will be equipped with a bolt, and the user can adjust the size of corresponding
screws according to the actual size of M.2SSD.
Page 33 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 34 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The motherboard can support two GPU cards, and each GPU card requires two
power connectors; GPU1_POWER1 and GPU_POWER2 are used for GPU1, while
GPU2_POWER1 and GPU2_POWER2 are used for GPU2; the pin is defined as
follows:
PIN1, 2, 3, 4 12V
PIN5, 6, 7, 8 Ground
PIN1, 2, 3 12V
PIN5, 6, 7 Ground
Page 35 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Location diagram:
Page 36 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 37 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Speed(MT/S),Voltage(V)
DPC=DIMM per Channel
Ranks
DIMM Capacity
per 1 Slot Per
TYPE DIMM (GB) 2 Slot per Channel
Channel
and data
Width 1DPC 1DPC 2DPC
Page 38 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 39 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 40 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
G1DCW motherboard has 3 2PIN pins, and the following chart shows the
differences of these 2PIN pin and their function:
Page 41 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 42 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The arrow in the figure above is the LED indicators of the power supply module.
Each power supply module has its own LED display status.
LED Description
appearanc
e
Page 43 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 44 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Precautions:
1. Press the left-hand fixed wrench (A) and push it slightly to the right (B) until
the wrench comes out of the retaining clip; and then gently lift the
non-adjustable wrench (C).
Page 45 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
2. Press the right securing wrench (D) and push it slightly to the left (E) until the
wrench comes out of the retaining clip; and then gently lift the non-adjustable
wrench (F).
3. Push the left non-adjustable wrench in the direction of the arrow and lift up
the mounting cover (G). Hold the edge and gently lift up the top cover (H).
Page 46 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
4. Align the CPU with the slot, and make sure that the triangle mark on CPU aligns
with the triangle marks on the socket, and carefully insert the CPU in the socket.
WARNING: Do not force the top cover of mounting box, or it may damage
the CPU.
Page 47 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
6. Push down the right non-adjustable wrench (I) and make sure that the edge of
the top cover of the mounting box is fixed by wrench (J), and insert the
non-adjustable wrench.
WARNING: Keep the protective cap in place, and only the motherboard
with the protective cover on the slot meets the requirements of Return
Merchandise Authorization (RMA), and so that we can repair and maintain it.
7. Push down the left non-adjustable wrench (L) and insert it (M).
Page 48 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
1. Remove the heat sink and apply the appropriate amount of hot silicone
paste on the bottom of the heat sink.
2. Place the heat sink on top of CPU, so that the four mounting holes are
aligned with the heat sink bracket on the motherboard and below.
3. Screw the two diagonal plane screws until they are in place (do not
tighten the screws too much to avoid damage to the CPU and heatsink)
4. Fully tighten the four bolts to install.
5. Reverse the sequence of this procedure to remove the heat sink.
Page 49 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 50 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
CPU 1 controls 8 memory slots: DIMMA1, A2, DIMMB1, B2, DIMM C1, C2 and
DIMM D1, D2. CPU2 controls 8 memory slots: DIMME1, E2, DIMMF1, F2, DIMMG1,
G2, and DIMMH1, H2; the memory slot shall be aligned with that of DIMM slots;
insert each DIMM module straight in place to prevent improper installation.
Remove: Gently push the release clamp near both ends of the memory module
slot with your thumb to remove the memory from the slot.
Page 51 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The motherboard supports the DDR4 memory of 4GB / 8GB / 16GB and 32GB
R-DIMM or 32GB and 64GB of LR-DIMM and NVDIMM, supports 2400MHz at
most (2400MT/s only in BroadwellCPU and each single channel). Always use the
same size, type and speed of the memory module. To achieve the best memory
performance, install the memory modules in the dual DIMM slots with the same
color.
Page 52 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Note:
Page 53 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
System controller module uses the standard LSI SAS2008 chipset PIKE card, also
supports up to four full-height PCI-e expansion cards or two full-height full-width
GPU cards.
Note: align the groove, and push down both sides at the same time.
Page 54 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 55 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
If you need to install the full width of the GPU card,as picture below)
If you need to use the standard PCI-E RAID card, you need to replace the SAS
PIKE card in original system into RIBCARD, as shown:
Note: Do not forget to connect the RAID card with SFF 8087 SAS
data cable of RIB
Page 56 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The system adopts the modular fan wall for heat dissipation. And the wind wall
support module has screw-free tools for installation. The installation diagram is
as follows::
Note: Align the fan wall hole with the clips on the cabinet, and then
connect the power cables for each fan to the backplane.
Page 57 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Installation completed
Page 58 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 59 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 60 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
The system supports 12 3.5 or 2.5-inch hard drives, and the installation of each
hard disk is the same, as follows:
System support 2*2.5 inch SATA HDD in the back, please check the installation
procedure as below
Page 61 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 62 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 63 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
This chapter describes the procedures for shelf of actiNAS BB212-3 server
barebone system.
Select a suitable location on the rack to place the server system, meeting the
following conditions: clean, well-ventilated, dust-free or dust-free, avoid high
temperature, electrical noise and electromagnetic interference; place a system
power socket.
actiNAS BB212-3 server barebone system adopts a full set of non-screw-free tool
rails with easy installation. Refer to following procedures to install into the rack.
Page 64 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 65 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page 66 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
System
System board
Motherboard G1DCW
model
Page 67 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Intel I350-AM4 for four 1GbE ports, and JL82599ES for two 10
Network card
gigabit SFP+ optical ports.
Rear USB: two USB 3.0 Ports, one built-in USB3.0 Port
USB
Front USB: two USB 2.0 Ports
Number of 1+1
power
supplies
100-127V~/ 9.9A
47Hz~63Hz。
System fan
Page 68 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
operating system
Safety Certification
Page 69 of 70
User Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Notes:
Page 70 of 70