Professional Documents
Culture Documents
6-45. The Beam Is Subjected To A Moment M. Determine
6-45. The Beam Is Subjected To A Moment M. Determine
Section Property:
B : • 25 mm
25mm ' "» 150m m
/ = — <0.2)(0.2')-— (0.15)(0.15 3 ) =91.14583(10-') m4
Afv
M(O.l)
= 1097.143 M
£" 91.14583(11)-*)
M(0.075)
= 822.857 M
F = 821857M(0.025)(0.2)
I
+ -(I097.I43M - 822.857Af>( 0.0251(0.2)
= 4 800 M
25 mm
25nu
25 mm
Section Property:
Mv
c=T
M0.075)
M = 35458 N m = 36.5 kN m
Me 36458(0.11
•=40.0 MPa Ans
/ 91.I4583(10-»)
266
© 2008 by R.C. Hibbeler. Published by Pearson Prentice Hall, Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all
copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
Section Properties:
.5') + 10(1.5)<6.375-0.75) 2
= 1 196.4375 in'
Myc 1000(12X6.375-1.5)
= 48.90 psi
/ 1196.4375
20 Ib
20(2) - M - 0 ; M = 40 Ib in
Me 40(0.125)
15.4 ksi
/ ~ £(0.25X0.25')
272
© 2008 by R.C. Hibbeler. Published by Pearson Prentice Hall, Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all
copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
2 !*
bending stress for the material is cranow = 150 MPa.
'
-2m- -1m-
37 .
Internal Moment: As shown on the moment diagram
60.0(IO')(a-ia)
150(10')
10 li/.
AM
Note thai 2S.8 ksi < ar = 60 ksi OK
291
© 2008 by R.C. Hibbeler. Published by Pearson Prentice Hall, Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all
copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
V(lb)
M,.,c
2844.44(12X0.75*)
l.40( 10')
2m — 2m
r I ,
fm
7#>
Allowable Bending Stress: The maximum moment is
^N\ L, *
Wm<1 = 562.5 N m as indicated on the moment diagram. ;
Applying the flexure formula -zso
MCA/-*-;
562.5(0.75t)
10( I0 6 ) =
294
© 2008 by R.C. Hibbeler. Published by Pearson Prentice Hall, Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all
copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
k
50 mm
] 150mm
Section Properties: For transformed section. Allowable Bending Stress: Applying the flexure formula
4M-|5(ft«mj)(a051) +0.10233(0.051(0.049289-0.025)2
7.45799(10-')]
•|-J2(0.15)(0.041)-HO.I5(0.04)(0.07-0.049289)!
= 7.45799(10-') m4
4- — M = 5 k N - m
20 mm
= 0.179 MPa An
7 4.17848(10-')'
1\ 3U Mf.
F
I rt
309