Professional Documents
Culture Documents
Mock-Ups in Is Lab Engine Oil Pressure Indicating
Mock-Ups in Is Lab Engine Oil Pressure Indicating
Component
1. Tank Probe
2. Tank with Drain and fill port
3. Indicator
4. Amplifier /Controller
5. CB
6. Switch
7. Low fuel sensor
8. Warning.
1. Indicator
2. CB
3. Thermocouple
4. Heat Source
1. Motor
2. Tacho Generator
3. CB
4. Indicator
1. Tank
2. Filter
3. Pump
4. Transmitter
5. Receiving Tank
6. Indicator
7. Filter
5. Check Valve
Sunchro system
1. Synchro Transmitter
2. Synchro Indicator
3. Switch
4. CB
MHRS
1. AOA Transducer
2. Indicator
3. CBs
4. SWITCH
5. Computer/relay
6. Shaker Motor/ Pusher Motor
7. Warning Light Blinking Type
8. Horn
9. Control Column
10. Shaker Motor and Pusher
FLY BY WRE
Other work:
1. New tag of all items
2. Inventory
3. Safety Poster and fire poster
4. Air-conditioned/clean room
5. File and register as per DGCA requirements
6. White board for small classroom of 10 to 15 candidates.
7. Lab Notice Board
8. Lab Tool drawer
9. Soldering stations
10. Lab In charge seating arrangement and computer set
11. Insulating mat for work bench
12. Piped compressed air of different pressure out put
13. Pitot static leak test and adapter
14. Power supply connection work
Radio lab
1. New tag of all items
2. Inventory
3. Safety Poster and fire poster
4. Air-conditioned/clean room
5. File and register as per DGCA requirements
6. White board for small classroom of 10 to 15 candidates.
7. Lab Notice Board
8. Lab Tool drawer
9. Soldering stations
10. Lab In charge seating arrangement and computer set
11. Insulating mat for work bench
12. Power supply connection work
13. ESDS soldering station
Mock-ups
1. VHF system
2. HF system
3. ADF system
4. VOR system
5. DME
6. Weather radar
7. Radio Altimeter
8. ATC transponder
9. ELT
10. CVR
ALL MOCK-UPS REQUIRED
A. FABRICATED ANTENNA
B. RECEIVER/TRANSMITTER MOUNTING TREY
C. FABRICATED CONTROL PANEL /AUDIO CONTROL PANEL
C. CO-AXIAL WIRE CONNECTION
AIRCRAFT ELECTRICAL LAB
1. New tag of all items
2. Inventory
3. Safety Poster and fire poster
4. File and register as per DGCA requirements
5. White board for small classroom of 10 to 15
candidates.
6. Lab Notice Board
7. Lab Tool drawer
8. Soldering stations
9. Lab In charge seating arrangement and computer set
10. Insulating mat for work bench
11. Power supply connection work
12. Generator mock-up
13. Motor speed control mock-up