Professional Documents
Culture Documents
Vol. 3 - BOQ
Vol. 3 - BOQ
Corporation Limited
1st Floor, Inside Health Development
Dr. Ramanbhai Patel Bhavan,
West Zone Office, AMC,
Usmanpura, Ahmedabad
BID DOCUMENT
CONSTRUCTION OF SERVICE
ROAD WITH HIGH STRENGTH
PAVER BLOCKS WITH RCC
DUCT FOR CABLES INCLUDING
WATER SUPPLY, SEWERAGE,
STORM WATER DRAINAGE AND
ELECTRICAL WORK FROM
GANDHI BRIDGE TO NEHRU
BRIDGE ON WEST BANK OF
SABARMATI RIVER FOR SRFD
PROJECT
VOLUME- 03
V) Form of Bid
VI) Bill of Quantities
Sabarmati River Front Development Corporation Limited
SECTION V
FORM OF BID
Contractor’s Bid
Description of the Works:
BID for
To : The Chairman,
Sabarmati River Front Development Corporation Limited
Address : 1st Floor, Dr. Ramanbhai Patel House, West Zone Office, Ahmedabad
Municipal Corporation, Usmanpura, Ahmedabad 13
Gentlemen,
Having examined the bidding documents including addendum, visited the site of works, we offer to execute the
Works described above in accordance with the Conditions of Contract, Specifications, Drawings and Bill of
Quantities accompanying this Bid at the quoted percentage above/below* the contract price mention in Bid
BOQ at arrived contract Price of ________________________________ [in figures]
1
(____________________________________________________________________________) [in letters] .
This Bid and your written acceptance of it shall constitute a binding contract between us. We understand that
you are not bound to accept the lowest or any Bid you receive.
We undertake that, in competing for (and, if the award is made to us, in executing) the above contract, we will
strictly observe the laws against fraud and corruption in force in India namely “Prevention of Corruption Act
1988”.
Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract
execution if we are awarded the contract, are listed below:
1
To be filled in by the Bidder, together with his particulars and date of submission at the bottom of the Form of Bid.
SECTION VI
BILL OF QUANTITIES
MEASUREMENT PREAMBLE
1. All quantities in the Bill of Quantities are estimated quantities. For all payment purposes measurements,
as prescribed in the contract document shall be taken and quantities shall be computed from such
measurements.
2. The inclusions and exclusions from quoted rates are specified in the details of each item of work in the
specifications and the Bill of Quantities. In case there is no specific mention of a particular detail, the
mode of measurements as prescribed in MORTH specifications or other standard specification for such
an item shall be followed.
3. In the event of contradiction between the MORTH specifications or other standard specification referred
to above and this Contract document, the provisions of this Contract document shall prevail.
SECTION VI
BILL OF QUANTITIES
CONSTRUCTION OF SERVICE ROAD WITH HIGH STRENGTH PAVER BLOCKS WITH RCC
DUCT FOR CABLES INCLUDING WATER SUPPLY, SEWERAGE, STORM WATER DRAINAGE
AND ELECTRICAL WORK FROM GANDHI BRIDGE TO NEHRU BRIDGE ON WEST BANK OF
SABARMATI RIVER FOR SRFD PROJECT
SUMMARY SHEET
Section Amount
Sub Section : 6.1 Road Work 3,79,88,254
Sub Section : 6.2 Water Supply Work 53,97,625
Sub Section : 6.3 Sewerage Work 74,43,075
Sub Section : 6.4 Storm Water Drainage Work 70,48,680
Sub Section : 6.5 Electrical Work 21,69,080
Grand Total 6,00,46,714
I / We am / are willing to carry out work at _____________________ % above / below* percent (should
be written in figures and words) of the estimated cost, as mentioned above. Amount of my / our tender
works out for Rs. ________________ (in figures)
Rupees ____________________________________ (in words)
Note : * Please strike out above or below, whichever is not applicable.
1. No extra payment shall be paid for material testing, soil testing and any other tests as required.
2. The unidentified utilities shall be shifted or reconstructed as per prevailing S.O.R rates of Ahmedabad
Municipal Corporation
Corporation.
1 2 3 4 5 6
6.1 ROAD WORKS & CIVIL WORKS
1 Cleaning, removing and disposing of debris etc from site and disposing the
same as directed by engineer in charge with all lead and lift and stacking of
150 Cum. 135 20,240
useful material as per MORT&H specification.
3 a) PCC/DLC
50 Cum. 387 19,342
4 b) RCC
50 Cum. 672 33,583
5 c) Masonry-(Brick/stone)
50 Cum. 349 17,473
8 Dismantling tiled, paved floors, stone floors laid in mortar including stacking
of serviceable material and disposal of unserviceable material with all lead and
50 Sqmt. 30 1,515
lifts
12 Spreading blindage or road crust filling the gaps in metal and levelling to camber
and gradient as directed (i) Murrum 100 Cum. 94 9,393
16 WMM ( Wet Mix Macadam): Providing , laying and compacting clean, crushed,
graded aggregate and granular material, premixed with water, to a dense mass
on a prepared subgrade/sub-base/base in accordance with the requirements of
these Specifications. The material shall be laid in 100 mm layers to lines, grades
and cross-sections shown on the approved drawings or as direction by the
Engineer. The contractor unit rate includes furnishing all materials to be
1,037 Cum. 1,519 15,74,709
incorporated in the work including all royalties, fees, rents where necessary and
all leads and lifts, all labour, tools, equipment and incidentals to complete the
work to the Specifications,)carrying out the work in part widths of road where
directed; and carrying out the required tests for quality.
17 Primer Coat - Providing and applying primer coat with bitumen emulsion on
prepared surface of granular Base including clearing of road surface and
100 Sqmt. 26 2,626
spraying primer at the rate of 0.60 kg/sqm using mechanical means.
18 DBM - Providing and laying dense graded bituminous macadam with 100-120
TPH batch type HMP producing an average output of 75 tonnes per hour using
crushed aggregates of specified grading, premixed with bituminous binder @
4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to
work site, laying with a hydrostatic paver finisher with sensor control to the
10 Cum. 7,535 75,346
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MoRTH specification
clause No. 504 complete in all respects.
19 Tack Coat - Providing and applying tack coat with bitumen emulsion using
emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared
100 Sqmt. 9 909
bituminous/granular surface cleaned with mechanical broom.
21 Providing and laying of dry lean cement concrete (DLC) of M15 grade below
concrete pavement, cycle track and footpath and compacting the same with 8 to
10 Tone vibratory roller as per the specifications and as per drawing and as
24 Cum. 2,690 64,551
directed by the Engineer. Rate shall include cost of formwork if any.
29 Providing and laying Brickwork using common burnt clay building brick
conforming to IS 1077-1992 having compressive strength not less than 35
17 Cum. 2,748 46,644
kg/cm2 in any shape and all depth including curing, scaffolding etc. in cement
mortar 1:4 etc complete
30 Providing and applying cement plaster 15 mm thick in cement mortar 1:3
including necessary finishing, curing, scaffolding required( if any) etc complete
60 Sqmt. 112 6,727
32 Providing and fixing FRP steps of size 500 mm x 150 mm x 25 mm etc complete
as per drawing. 75 Nos. 303 22,725
33 Providing & fixing fiber reinforced concrete Heavy Duty manhole cover precast
M20 Grade as per drawing having opening of 50 cm with lifting arrangements
including reinforcement, loading, carting, unloading, stacking, etc. complete with 15 Nos. 1,327 19,907
fixing in cement concrete of 1:2:4.
35 Providing, laying and joining RCC NP2 Hume pipe of various diameter with
socket spigot joint with "O" ring. Rate shall also include freight, taxes, insurance,
laying, jointing, testing , as per site condition etc. complete and as instructed by - -
Engineer in charge.(Conforming to IS 458:)
36 a) 150 mm dia
150 Rmt 189 28,331
37 b) 250 mm dia
150 Rmt 281 42,117
38 Providing & doing Rendering to the existing concrete surface as per drawing
or as directed by engineer in charge with required proportion of grey and white
cement including needed curing as per specification and making the surface
finish acceptable to the satisfaction of the Client/ Consultants. The cost includes
chipping out, concrete and making the surface smooth as well as filling the holes 250 Sqmt. 104 26,008
in the concrete with arrangement of required scaffolding at any level and curing
as per the specification.
Electrical Duct
39 Earthwork in excavation necessary for construction of
roadway/shoulder/verge/median/footpath/service lane, foundation of structure
,guide wall etc. in all types of soil for all lift to the required lines, grades and
cross-sections shown in the drawings or as directed by the Engineer including
4,719 Cum. 87 4,09,892
stacking the required and suitable material and disposal of unwanted materials
for lead of 50 m etc. complete.
a) 0 to 1.5 m
40
b) 1.5 to 3 m 3,775 Cum. 94 3,55,367
41 Transportation of materials such as murrum, earth, kapchi, gravel, brick bats,
kankar, sand, debris etc. from the site to approved location, including loading,
unloading, stacking and spreading etc. complete. 7,220 Cum. 133 9,62,580
i) 0 to 2 Km.
46 Providing and laying Half Brick masonry in common burnt clay building brick
having crushing strength not less than 35 kg/sq. cm. in Cement Mortar 1:4 in
726 Sqmt. 374 2,71,306
foundation and plinth
48 Providing and fixing FRP steps of size 500 mm x 150 mm x 25 mm etc complete
as per drawing. 564 Nos. 303 1,70,892
49 Providing & fixing fiber reinforced concrete Heavy Duty manhole cover precast
M20 Grade as per drawing having opening of 50 cm with lifting arrangements
including reinforcement, loading, carting, unloading, stacking, etc. complete with 47 Nos. 1,327 61,865
fixing in cement concrete of 1:2:4.
1 2 3 4 5 6
6.2 WATER SUPPLY WORKS
1 Excavation for trenches including all safety provisions, stacking excavated
stuff up to a lead of 90 m, cleaning the site etc. complete with all lifts and
leads. The excavation shall be carried out in stable slope and shoring strutting.
No extra payment shall be made for stable slope and shoring, strutting. 2,205 Cum. 89 1,95,980
a) 0.0 to 1.5 m
2 b) 1.5 to 3 m
100 Cum. 98 9,797
3 Providing, supplying, lowering ,laying & jointing DI K-9 grade pipe for
following nominal bore diameter with internal cement mortar lining including all
taxes, insurance, transportation, freight charges, Octroi, inspection charges,
loading unloading, conveyance to stores, stacking etc. complete as per IS 150 Rmt. 1,034 1,55,136
8329-2000.
a) 80 mm dia. DI pipe (K-9)
12 Providing and laying controlled cement concrete M 200 and curing complete
including the cost of form work and excluding cost of reinforcement for
reinforced concrete work in Walls, from top of foundation level upto floor two 35 Cum. 5,036 1,76,255
level.
13 Providing and laying controlled cement concrete M 200 and curing complete
including the cost of form work and excluding cost of reinforcement for
20 Cum. 4,193 83,850
reinforced concrete work in slabs, upto floor two level.
14 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
13 Cum. 4,375 56,879
reinforced concrete work in slabs, upto floor two level.
15 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
reinforced concrete work in Wall from Top of foundation level upto floor two 11 Cum. 4,777 52,550
level.
18 Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel
bar with plastic polyproclene (P.P.) material (virgin) as per drawing attached.
238 Nos. 76 18,029
19 Providing, supplying & fixing ISI mark CI D/F sluice valves of following class
and diameter including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading, conveyance to departmental
stores, stacking etc. complete. PN-1 with hand wheel /cap operated (PD type 15 Nos. 2,935 44,026
short body)
a) 80 mm
20 b) 300 mm
1 Nos. 20,449 20,449
21 Providing and fixing double acting kinetic air valves with isolation valve of
following dia. including fixing, nut, bolts etc. complete, as directed.
1 No. 10,522 10,522
80 mm dia
23 Manufacture, supply, delivery of Ductile Iron flange socket spigot bends, tees,
reducers of any other specials as per BS-EN-545/1995 class-A series K12
suitable for use with DI pipes manufactured per IS 8329/1994 delivery of
specials is to be made to Store or site of works any where including all taxes,
760 Kg 127 96,718
loading, unloading, carting, stacking, insurance, inspection charges, octroi etc.
complete.
For 80 to 300 mm dia
24 F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover:
728mmø & 100 mm thick circular cover, 35.00MT load design,100 x 2mm MS
flat all round,16mm ø plain round bar for lifting the cover & should be fitted
with plastic cups. Frame:560mm ø clear opening, -888 x 888 x 175mm. On
19 Nos. 1,555 29,553
the upper periphery of frame 25x3 mm wide MS flat should be well embed in
concrete to protect the edges of frame. FRCE.H.D.-35 manhole cover & frame
described as above.
26 Laying 0.9 m. dia. RCC NP4 pipe (by pushing method) of required length
including open excavation for thrust bed necessary form work, concreting,
curing, vibrating , pushing etc. complete as per contractor's own design
approved by competent authority based on approved GAD by competent
authority.
This item includes:
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall
with necessary excavation with shoring and strutting, formwork, curing,
vibrating as per contractor's own design approved by Authority
b) Providing and fixing TMT-Fe-500 bars for RCC pipe including thrust bed
and thrust wall including supplying, cleaning, cutting, bending and placing in
position, lapping, binding with 16 SWG soft iron wire irrespective of locations
and levels
a) 900 mm dia
25 Rmt. 22,543 5,63,580
27 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) including finishing with a
floating of neat cement etc. complete laid in one layer finished including
22 Sqmt. 191 4,200
necessary curing and with ordinary Portland cement. 40 mm thick.
28 Providing and fixing water tight construction or expansion joints 150 mm. dia.
Wide thin ribbed PVC. 5 Rmt. 317 1,586
30 Providing, supplying, lowering in pipe, laying & jointing DI K-9 grade pipe for
following nominal bore diameter with internal cement mortar lining including all
taxes, insurance, transportation, freight charges, Octroi, inspection charges,
loading unloading, conveyance to stores, stacking etc. complete as per IS 25 Rmt. 4,566 1,14,155
8329-2000.
a) 300 mm dia DI K-9 Pipe
2 a) 0.0 to 1.5 m.
6,562 Cum. 116 7,62,147
3 b) 1.5 to 3.0 m.
2,896 Cum. 131 3,80,251
4 c) 3.0 to 4.5 m.
140 Cum. 144 20,220
5 Extra rate over item No.1 for excavation is to be done in wet condition or in sub
soil water inclusive of bailing out of water, dewatering the trenches by well points
system as required according to site condition, is to be done during excavation
850 Cum. 20 17,170
as per requirement on site and as per directed by Engineer-in-charge.
7 Providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse Sand :8 hand
broken stone aggregate 40 mm nominal size) and curing etc. complete
109 Cum. 2,184 2,38,015
excluding cost of form work in foundation and plinth.
8 Brick work using common burnt clay building bricks having crushing strength not
less than 35kg / Sq. C. M. in ramp, steps and Foundation & Plinth in cement
morter1:5 (1 cement : 5 coarse sand) including racking out joints, curing, 297 Cum. 2,649 7,86,821
scaffolding required if any etc. complete, as directed.
9 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
28 Cum. 4,375 1,22,509
reinforced concrete work in slabs, upto floor two level.
10 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
reinforced concrete work in Wall from Top of foundation level upto floor two 34 Cum. 4,777 1,62,428
level.
11 Providing and laying controlled cement concrete M 150 and curing complete
excluding the cost of form work and reinforcement for reinforced concrete work
18 Cum. 3,485 62,721
in slabs, upto floor two level.
12 Providing and laying controlled cement concrete M 150 and curing complete
including the cost of form work and excluding cost of reinforcement for
74 Cum. 3,808 2,81,770
reinforced concrete work in slabs, upto floor two level.
14 Providing and applying 20 mm thick inside cement plaster with water proofing
agent on inside of sump consisting of 12 mm thick backing coat of CM 1:3 (1
cement : 3 sand) and 8 mm thick finishing coat of CM 1:1 (1 cement : 1 sand)
689 Sqmt. 251 1,73,277
etc. complete including necessary curing, scaffolding required if any etc.
complete.
17 F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover: 728mmø
& 100 mm thick circular cover, 35.00MT load design,100 x 2mm MS flat all
round,16mm ø plain round bar for lifting the cover & should be fitted with plastic
cups. Frame:560mm ø clear opening, -888 x 888 x 175mm. On the upper
47 1,555 73,104
periphery of frame 25x3 mm wide MS flat should be well embed in concrete to
protect the edges of frame. FRCE.H.D.-35 manhole cover & frame described as
above.
20 Making connection to the ex. M.H. in running sewer incl. Dewatering and other
required machinery etc. of following dia pipe at any convenient time. All
damaged work shall be well repaired as per instructions etc. complete.
4 No. 2,525 10,100
i) For 450 mm dia pipe
21 Laying 1.2 m. dia. RCC NP4 pipe (by pushing method) of required length
including open excavation for thrust bed necessary form work, concreting,
curing, vibrating , pushing etc. complete as per contractor's own design
approved by competent authority based on approved GAD by competent
authority.
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with
necessary excavation with shoring and strutting, formwork, curing, vibrating as
per contractor's own design approved by Authority.
b) Providing and fixing TMT-Fe-500 bars for RCC pipe including thrust bed and
thrust wall including supplying, cleaning, cutting, bending and placing in position,
lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
23 Providing and fixing water tight construction or expansion joints 150 mm. dia.
Wide thin ribbed PVC. 12 Rmt 317 3,806
26 Providing & applying Coal Tar Epoxy of approved make like Dr. Fixit (Pidilite),
Fosroc, clean coats,Sika, two component epoxy coating in two coats as per the
mixing and application procedure suggested by manufacturer on the concrete
surfaces. Coverage recommended is 3.0 – 4.0 m2 Per litre for two coat 75 Sqmt 374 28,028
application at the coverage rate of approx. 250 - 300 micron DFT.
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with
necessary excavation with shoring and strutting, formwork, curing, vibrating as
per contractor's own design approved by Authority.
b) Providing and fixing TMT-Fe-500 bars for RCC pipe including thrust bed and
thrust wall including supplying, cleaning, cutting, bending and placing in position,
lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
3 b) 1.5 to 3 m
1,395 94 1,31,290
4 c) 3 to 5 m
482 101 48,682
5 d) 5 to 6.5 m
306 114 35,017
6 e) 6.5 to 8 m
220 128 28,131
7 f) 8 to 9.5 m
148 141 20,912
8 g) 9.5 to 11 m
90 155 13,926
9 h) 11 to 12.5 m
44 168 7,399
10 i) 12.5 to 14 m
10 182 1,816
11 Extra rate over item No. for excavation is to be done in wet condition or in sub
soil water inclusive of bailing out of water, dewatering the trenches by well points
system as required according to site condition, is to be done during excavation
29 Cum. 20 586
as per requirement on site and as per directed by Engineer-in-charge.
13 Providing and laying controlled cement concrete M 150 and curing complete
excluding the cost of form work and reinforcement for reinforced concrete work
4 Cum. 3,485 14,635
in slabs, upto floor two level.
14 Providing and laying controlled cement concrete M 150 and curing complete
including the cost of form work and reinforcement for reinforced concrete work
53 Cum. 3,808 2,01,237
in slabs, upto floor two level.
15 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
42 Cum. 4,375 1,83,763
reinforced concrete work in slabs, upto floor two level.
16 Providing and laying controlled cement concrete M 250 and curing complete
including the cost of form work and excluding cost of reinforcement for
reinforced concrete work in Wall from Top of foundation level upto floor two 22 Cum. 4,777 1,05,101
level.
17 Providing and laying controlled cement concrete M30 for water retaining
structures with vibrating, curing etc. complete including the cost of form work but
excluding the cost of reinforcement for RCC work stated below etc. complete at
any height as directed.
22 Providing and applying 20 mm thick inside cement plaster with water proofing
agent on inside of sump consisting of 12 mm thick backing coat of CM 1:3 (1
cement : 3 sand) and 8 mm thick finishing coat of CM 1:1 (1 cement : 1 sand)
525 Sqmt. 251 1,32,032
etc. complete including necessary curing, scaffolding required if any etc.
complete.
24 Providing 10mm thick cement plaster in single coat on brick/concrete walls for
interior plastering upto floor two level and finished even and smooth in (i)
140 Sqmt. 82 11,453
Cement mortar 1 :3
25 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size) including finishing with a floating
of neat cement etc. complete laid in one layer finished including necessary
76 Sqmt. 191 14,508
curing and with ordinary Portland cement. 40 mm thick.
26 Brick work using common burnt clay building bricks having crushing strength not
less than 35kg / Sq. C. M. in ramp, steps and Foundation & Plinth in cement
morter1:5 (1 cement : 5 coarse sand) including racking out joints, curing, 228 Cum. 2,649 6,04,024
scaffolding required if any etc. complete, as directed.
27 Providing F.R.C. MH seat cover incl. carting to the work site etc. comp. Directed.
F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover: 728mmø
& 100 mm thick circular cover, 35.00MT load design,100 x 2mm MS flat all
round,16mm ø plain round bar for lifting the cover & should be fitted with plastic
cups. Frame:560mm ø clear opening, -888 x 888 x 175mm. On the upper 44 No 1,555 68,438
periphery of frame 25x3 mm wide MS flat should be well embed in concrete to
protect the edges of frame. FRCE.H.D.-35 manhole cover & frame described as
above.
29 Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar
with plastic polyproclene (P.P.) material (virgin) as per drawing attached.
510 No 76 38,633
31 b) 1200 mm dia.
60 Rmt. 6,346 3,80,750
32 Manufacturing, testing, supplying, loading, transporting to worksite, unloading,
lowering in pipe, laying and jointing RCC NP4 class pipes with socket and spigot
joint as per IS 458-2003 with ISI Mark including EPDM Rubber ring as per IS
5382-1985 etc. comp. As directed by Engineering in charge. 60 Rmt. 4,718 2,83,063
a) 600 mm dia. RCC NP4 Pipe
3 Cable Lugs:
Supplying & making joint with necessary bi metallic crimping socket of long neck
type connecting the same to various SFP's/PP/Poles etc. for the following sizes
for all cores at end as specified. 80 No. 8 646.40
Copper Cables:
6 sq.mm x 4 c Cu.
4 DWC Pipes
16.3 Supplying and laying following sizes Double walled corrugated HDPE pipes
confirming IS 14930 Part 1 & Part 2 of approved make in open / concealed in
manner including excavation and back filling (if required) as per layout and
150 Rmt. 217 32,572.50
drawing and re-filling the trenches etc. complete as directed. (NP Class)
90 MM OD DWC Pipe
9 Supply & installation of 1.5 sqmm 3 core round flexible wire from Existing pole
junction box to light fixture and 1 No. 2A SP MCB on existing Junction box
including Lugs, Ferruling with necessary required hardware. 90 No. 389 34,996.50