Professional Documents
Culture Documents
C15 & C18 Gear Group (Rear)
C15 & C18 Gear Group (Rear)
Shutdown SIS
Previous Screen
Specifications
C15 and C18 Industrial Engines
Media Number -SENR9842-09 Publication Date -01/10/2014 Date Updated -09/08/2017
i04388273
S/N - GJE1-UP
S/N - JKG1-UP
S/N - JRE1-UP
S/N - MCW1-UP
S/N - PBN1-UP
S/N - PCZ1-UP
S/N - PDM1-UP
S/N - WJH1-UP
S/N - WRH1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 20/09/2019
C18 Industrial Engine GJE00001-UP(SEBP4247 - 52) - Systems & Components Page 2 of 3
Illustration 1 g02555096
Table 1
Specification for 147-3754 Rear Gear Gp
Item Qty Part Specification Description
9X-7371
1 2 O-Ring Lubricate the bore lightly with the lubricant that is being sealed.
Seal
4N-1230
2 1 O-Ring Lubricate the bore lightly with the lubricant that is being sealed.
Seal
6V-1197
3 1 O-Ring Lubricate the bore lightly with the lubricant that is being sealed.
Seal
8F-8804
4 1 Torque to 136.0 ± 13.6 N·m (100.3 ± 10.0 lb ft)
Bolt
1D-4569
5 1 Torque to 136.0 ± 13.6 N·m (100.3 ± 10.0 lb ft)
Bolt
2S-4663
6 1 O-Ring Lubricate the bore lightly with the lubricant that is being sealed.
Seal
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 20/09/2019
C18 Industrial Engine GJE00001-UP(SEBP4247 - 52) - Systems & Components Page 3 of 3
7 1 4N-0848 Clean the wear sleeve. Also, prime the inner diameter of the wear
Wear sleeve and the outer diameter of the crankshaft with 8T-9021 Adhesive.
Sleeve Apply green Loctite 620to the outer diameter of the crankshaft. Install
the wear sleeve onto the crankshaft.
6V-3319
8 1 O-Ring Lubricate the bore lightly with the lubricant that is being sealed.
Seal
Copyright 1993 - 2019 Caterpillar Inc. Fri Sep 20 21:30:03 UTC+0200 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 20/09/2019