Professional Documents
Culture Documents
Package Information: March 2017
Package Information: March 2017
Package Information: March 2017
PACKAGE INFORMATION
SOT89
Dim Min Max Typ
H
E A 1.40 1.60 1.50
B 0.50 0.62 0.56
B1 0.42 0.54 0.48
c 0.35 0.43 0.38
B1 L D 4.40 4.60 4.50
B D1 1.62 1.83 1.733
D2 1.61 1.81 1.71
e E 2.40 2.60 2.50
D2 E2 2.05 2.35 2.20
e - - 1.50
8°
H 3.95 4.25 4.10
(4X H1 2.63 2.93 2.78
)
H1
L 0.90 1.20 1.05
E2 L1 0.327 0.527 0.427
A z 0.20 0.40 0.30
All Dimensions in mm
L1
D z
Value
Dimensions
(in mm)
Y3 C 1.500
Y1 G 0.244
X 0.580
Y4 X G X1 0.760
X2 1.933
Y 1.730
Y1 3.030
Y Y2 Y2 1.500
Y3 0.770
Y4 4.530
X1
C
Note: The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary depending on application.
These dimensions may be modified based on user equipment capability or fabrication criteria. A more robust pattern may be desired for
wave soldering and is calculated by adding 0.2 mm to the ‘Z’ dimension. For further information, please reference document IPC-7351A,
Naming Convention for Standard SMT Land Patterns, and for International grid details, please see document IEC, Publication 97.
Note: For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance
distances between device Terminals and PCB tracking.
SOT89 Package Information 1 of 6 March 2017
Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
2 SOT89
-7R
12mm
-13R
Pin 1
Direction of feed
TA
12mm
TC
Pin 1
Direction of feed
Pin 1
-7
12mm
-13
Direction of feed
Note: For part marking, refer to product datasheet.
Note: Tape and package drawings are not to scale and are shown for device tape orientation only.
Tape Width (W) Dimension Value (mm) Dimension Value (mm) Dimension Value (mm)
7” 178 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 55 5 12.4 +2.0 -0.0 18.4
12mm
13” 330 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 100 2 12.4 +2.0 -0.0 18.4
Note: There shall be a leader of at least 230mm which may consist of carrier tape and/or cover tape or a start tape followed by at least 160mm of
empty carrier tape sealed with cover tape.
Note: There shall be a trailer of at least 160mm of empty carrier tape sealed with cover tape. The entire carrier tape must release from the reel
hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the remaining components in the cavities.