Jansen produces textile-flexible systems for smoke guards, smoke protection conclusions, and fire protection curtains. These systems offer invisible fire and smoke protection with minimal space requirements and low weight. Textile fabrics are guided in lateral profiles and wound onto a shaft above or within the opening. They close automatically and speed-controlled via gravity fail-safe mechanisms. Jansen also provides comprehensive inspection, maintenance, repair, and installation services to ensure the highest level of safety for these systems.
Jansen produces textile-flexible systems for smoke guards, smoke protection conclusions, and fire protection curtains. These systems offer invisible fire and smoke protection with minimal space requirements and low weight. Textile fabrics are guided in lateral profiles and wound onto a shaft above or within the opening. They close automatically and speed-controlled via gravity fail-safe mechanisms. Jansen also provides comprehensive inspection, maintenance, repair, and installation services to ensure the highest level of safety for these systems.
Jansen produces textile-flexible systems for smoke guards, smoke protection conclusions, and fire protection curtains. These systems offer invisible fire and smoke protection with minimal space requirements and low weight. Textile fabrics are guided in lateral profiles and wound onto a shaft above or within the opening. They close automatically and speed-controlled via gravity fail-safe mechanisms. Jansen also provides comprehensive inspection, maintenance, repair, and installation services to ensure the highest level of safety for these systems.
Textile-flexible systems Jansen textile-flexible systems stand out due to
• invisible fire and smoke protection because of a small recess gap.
• its low demand on space.
• its low weight.
Smoke guard
Smoke protection conclusion
Fire protection curtain
JANSEN BRANDSCHUTZ
Textile-flexible systems
• Smoke guards according to DIN EN 12101-1.
• Smoke protection conclusions according to DIN 18095-3/Sm DIN 18095-3/ Sm according to DIN EN 1634-3. • Fire protection curtains according to DIN EN 1634-1.
System: Function: Options:
Textile-flexible systems consist of In open condition the winding • RAL lacquer coat textile fabrics which have been ap- shaft is located in a zinc-coated to choice (casing) proved by building control. Corre- sheet steel casing above or in the • stainless steel sponding to the classification for aperture to be closed. The winding • battery buffering sealing-off of fire and smoke, glass shaft is kept in an open position • fire detection / filament fabrics are used, partially by means of a magnetic clamp. internal locking device with silicon or polyurethane lami- The system is closed speed-cont- nation. rolled through an end-rail via dead Approved/ Due to the low weight and small weight following the principle of verified according to: casing and guide rail dimensions “Gravity Fail Save” at appr. 15 cm/s. Smoke guards: these systems are especially indica- D60/ DIN EN 12101-1 ted for open room designs or refit- Control & drive: Smoke protection conlusions: ting. For the activation of the drive with RS/ DIN 18095-3, respectively internal locking device a micro- Sm/DIN EN 1634-3 Guide rail: processor controlled internal lo- Fire protection curtains: The hanging is guided in laterally cking system is implemented for ---/E30 – 180, respectively EW30 – mounted profiles. the automatic textile-flexible sys- 60 according to DIN EN 1634-1 tems. Due to battery buffering the end-rail will be held in its current position for at least 4 hours in case of a power outage. Smoke Smoke protection the rescue of persons for a span of guards: conclusions: appr. ten minutes without respira- In combination with smoke and They serve to keep application tory protection. heat extractor systems they serve units and especially escape and to create a smoke-free layer above rescue routes free of smoke. Fire protection floor level, improving escape and Smoke protection conclusions in curtains: rescue of people and animals closed condition are supposed In a built-in condition their pur- as well as the protection of the to hamper the entry of smoke in pose is to prevent the entrance of building. such a way, that in case of a fire fire. the area beyond can be used for Maintenance and Service The name Jansen does not only Inspection & work routines as well as possible stand for innovative products and Maintenance faults are stated. varied special solutions in the area All-around one-stop service means For fire-protection closures with of fire protection, but also offers that Jansen not only takes care of lock systems, the operator is ob- their customers comprehensive the compulsory inspection for door liged to periodical monitoring and individual service – not only for systems (according to inspection through qualified persons accor- their own door systems but also for regulations of the respective fede- ding to the guidelines for lock those of other manufacturers. Our ral state and the rule of the profes- systems, published by the German intensive on-site customer support sional association) but also offers Institute for Constructional Engi- is carried out by skilled professio- additionally the maintenance of neering in Berlin. Furthermore the nal personnel. Hereby we can gu- the door systems on request. Cus- performance of fire-protection arantee the highest level of safety tomers thus not only save money door systems with lock systems has for your door systems. but also a considerable amount of to be checked by the operator. time. Assembly The difference between main- Repair Apart from the delivery of door tenance and inspection is that In order to rectify any problems as systems Jansen naturally also for maintenance additional quickly as possible the competent carries out the assembly and ins- work routines according to the staff will be pleased to be of ser- tallation of the products. Due to manufacturer’s guidelines are car- vice to you any time. Just contact our own skilled assembly operators ried through for the preservation Jansen. They will help you quickly Jansen guarantees a smooth imple- of performance properties. and without long waiting periods. mentation from the actual installa- After completion of the respec- tion via the electronical installation tive maintenance or inspection the up to the acceptance inspection. customer receives an inspection record in which all implemented