Professional Documents
Culture Documents
Usage Manual V1.5
Usage Manual V1.5
1
IMPORTANT
2
DO NOT place the app in /Applications folder. It will fail.
Please keep X-Activator in the Desktop. OUTSIDE OF ANY FOLDER
DO NOT rename the app. X-Activator ONLY
3
GENERAL USAGE OF THE APP
1. HOW TO LOG IN
On the top menu click “My Account” then click “Login”. Afterwards use the username and
password that you previously registered at X-Activator Platform.
4
BYPASS GSM DEVICE (WITH SIGNAL)
X-Activator will fully activate any GSM iPhone from iPhone 7 to iPhone X. If you are
unsure what GSM means, please check the following graph:
So long as your phone doesn’t have the MEID Number (indicating that it uses CDMA
Technology) X-Activator will perform a complete activation which includes the following:
5
BYPASS GSM DEVICE (WITH SIGNAL) – PROCESS
Sometimes you might encounter that despite having carefully followed the steps stated before
your phone might be unable to activate iMessage, Facetime, and/or push notifications. If this
were the case, please follow the following troubleshooting steps to fix this issue.
6
BYPASS CDMA DEVICE (NO SIGNAL)
X-Activator will partially activate any CDMA iPhone from iPhone 5s to iPhone X.
7
TROUBLESHOOTING IMESSAGE, FACETIME, NOTIFICATIONS
Sometimes you might encounter that despite having carefully followed the steps stated before
your phone might be unable to activate iMessage, Facetime, and/or push notifications. If this
were the case, please follow the following troubleshooting steps to fix this issue.
1. Put your phone in DFU Mode and restore with iTunes to the latest available iOS Version
at the moment. Then follow the activation steps above.
2. Make sure that the SIM Card you are using to activate is live and can access the 4G
network.
3. Make sure the SIM Card you are using to activate belongs to a GSM Carrier and not a
CDMA carrier.
4. Use the “Fix Dependencies” option inside X-Activator for as many times as you need
until notifications become live.
1. If after having being shown the successful message during the activation process, you
encounter that after restarting the phone it becomes relocked (aka, the hello screen
appears). That means you probably haven’t introduced a SIM Card inside, or that the SIM
Card doesn’t have a PIN Code Lock. YOU NEED TO ENABLE THE PIN CODE
LOCK FOR THE SIM YOU INTRODUCE.
2. If you are totally sure that the SIM Card you introduced does indeed have a PIN CODE
Lock but the hello screen still appears, please proceed to put the device in DFU Mode
and restore to the latest iOS Version using iTunes.
8
9