Professional Documents
Culture Documents
Answer:: Analysis of Variance
Answer:: Analysis of Variance
Answer:: Analysis of Variance
Analysis of Variance
True/False
3. There is one, unique F distribution for a F-statistic with 29 degrees of freedom in the numerator and 28
degrees of freedom in the denominator.
Answer: True Difficulty: Medium Goal: 1 AACSB: AS
5. One characteristic of the F distribution is that the computed F can only range between -1 and +1.
Answer: False Difficulty: Easy Goal: 1
6. The F distribution is positively skewed and its values may range from 0 to plus infinity.
Answer: True Difficulty: Easy Goal: 1
7. The shape of the F distribution is determined by the degrees of freedom for the F-statistic, one for the
numerator and one for the denominator.
Answer: True Difficulty: Medium Goal: 1
9. Like Student's t distribution, a change in the degrees of freedom causes a change in the shape of the F
distribution.
Answer: True Difficulty: Easy Goal: 1
11. For the hypothesis test, H o : σ 1 σ 2 , with n1 = 10 and n2 = 10, the F-test statistic is 2.56. At the
2 2
12. For the hypothesis test, H o : σ 1 σ 2 , with n1 = 4 and n2 = 4, the F-test statistic is 50.01. At the
2 2
13. For the hypothesis test, H o : σ 1 σ 2 , with n1 = 7 and n2 = 7, the F-test statistic is 2.56. At the
2 2
14. For the hypothesis test, H o : σ 1 σ 2 , with n1 = 9 and n2 = 9, the F-test statistic is 4.53. At the
2 2
15. To employ ANOVA, the populations being studied must be approximately normally distributed.
Answer: True Difficulty: Easy Goal: 3
16. To employ ANOVA, the populations should have approximately equal standard deviations.
Answer: True Difficulty: Easy Goal: 3
17. In an ANOVA table, k represents the total number of sample observations and n represents the total
number of treatments.
Answer: False Difficulty: Medium Goal: 4
18. In an ANOVA table, k represents the number of treatments, b represents the number of blocks, and n
represents the total number of sample observations.
Answer: True Difficulty: Medium Goal: 4
21. For an ANOVA test, rejection of the null hypothesis does not identify which treatment means differ
significantly.
Answer: True Difficulty: Medium Goal: 5 AACSB: AS
22. If the computed value of F is 4.01 and the critical value is 2.67, we would conclude that all the
population means are equal.
Answer: False Difficulty: Medium Goal: 5
23. If the computed value of F is 11.1 and the 0.05 level is used, we would assume that a mistake in
arithmetic has been made.
Answer: False Difficulty: Medium Goal: 5
24. If we want to determine which treatment means differ, we compute a confidence interval for the
difference between each pair of means.
Answer: True Difficulty: Easy Goal: 6
25. If a confidence interval for the difference between a pair of treatment means includes 0, then there is
no difference in the pair of treatment means.
Answer: True Difficulty: Medium Goal: 6
26. If the endpoints of a confidence interval for the difference between a pair of treatment means are both
positive numbers, then the treatment means are not different.
Answer: False Difficulty: Medium Goal: 6
29. When a blocking effect is included in an ANOVA, the result is a smaller error sum of squares.
Answer: True Difficulty: Medium Goal: 7
31. When a blocking effect is included in an ANOVA, the analysis is more likely to detect differences in
the treatment means.
Answer: True Difficulty: Hard Goal: 7
32. The F-statistic to test for a blocking effect is computed as the ratio of the Treatment Mean Square and
the Block Mean Square.
Answer: False Difficulty: Hard Goal: 7
33. In a two-way ANOVA, the sum of the treatment, block, and error degrees of freedom equal the total
degrees of freedom.
Answer: True Difficulty: Medium Goal: 7
34. In a two-way ANOVA, the sum of the treatment and block mean squares equals the error mean
square.
Answer: False Difficulty: Medium Goal: 7
35. In a two-way ANOVA, the sum of the treatment, block, and error sum of squares equals the total sum
of squares.
Answer: True Difficulty: Medium Goal: 7
36. In a two-way ANOVA with interaction, there are two factor effects and an interaction effect.
Answer: True Difficulty: Medium Goal: 8
37. In a two-way ANOVA with treatment and block effects, an interaction effect is also included.
Answer: False Difficulty: Hard Goal: 8
38. In an interaction plot, parallel lines are an indication that there is no interaction effect.
Answer: True Difficulty: Medium Goal: 8
39. Interaction between two factors occurs when the effect of one factor on the response variable is the
same for any value of another factor.
Answer: False Difficulty: Hard Goal: 8
41. What distribution does the F distribution approach as the sample size increases?
A) Binomial
B) Normal
C) Poisson
D) Exponential
Answer: B Difficulty: Medium Goal: 1 AACSB: AS
44. A large department store examined a sample of the 18 credit card sales and recorded the amounts
charged for each of three types of credit cards: MasterCard, Visa and Discover. Six MasterCard sales,
seven Visa and five Discover sales were recorded. The store used ANOVA to test if the mean sales for
each credit card were equal. What are the degrees of freedom for the F statistic?
A) 18 in the numerator, 3 in the denominator
B) 3 in the numerator, 18 in the denominator
C) 2 in the numerator, 15 in the denominator
D) 6 in the numerator, 15 in the denominator
Answer: C Difficulty: Medium Goal: 4 AACSB: AS
K ilo m e te rs p e r lite r
R e g u la r B e lo w R e g u la r P re m iu m Super P re m iu m
3 9 .3 1 3 6 .6 9 3 8 .9 9 40 .0 4
3 9 .8 7 4 0 .0 0 4 0 .0 2 39 .8 9
3 9 .8 7 4 1 .0 1 3 9 .9 9 39 .9 3
A) 1.96
B) 4.07
C) 2.33
D) 12.00
Answer: B Difficulty: Medium Goal: 4
46. Three different fertilizers were applied to a field of celery. In computing F, how many degrees of
freedom are there in the numerator?
A) 0
B) 1
C) 2
D) 3
Answer: C Difficulty: Medium Goal: 4
47. Suppose a package delivery company purchased 14 trucks at the same time. Five trucks were
purchased from manufacturer A, four from B and five from manufacturer C. The cost of maintaining
each truck was recorded. The company used ANOVA to test if the mean maintenance cost of the trucks
from each manufacturer were equal. To apply the F test, how many degrees of freedom are in the
denominator?
A) 2
B) 3
C) 11
D) 14
Answer: C Difficulty: Medium Goal: 4
S a m p le N u m b e r P ro g ra m m e d In s tru c tio n L e c tu re TV G ro u p D is c u s s io n
1 6 8 7 8
2 7 5 9 5
3 6 8 6 6
4 5 6 8 6
5 6 8 5 5
B) H o : σ 1 σ 2 3
2 2 2
C) H o : μ 1 μ 2 μ 3
D) H o : μ 1 μ 2 μ 3
Answer: C Difficulty: Easy Goal: 4
50. An electronics company wants to compare the quality of their cell phones to the cell phones from
three competitors. They sample 10 phones from each company and count the number of defects for each
phone. If ANOVA were used to compare the average number of defects, the treatments would be defined
as:
A) the number of cell phones sampled.
B) the average number of defects.
C) The total number of phones
D) The four companies.
Answer: D Difficulty: Easy Goal: 5
52. If an ANOVA test is conducted and the null hypothesis is rejected, what does this indicate?
A) Too many degrees of freedom
B) No difference between the population means
C) A difference between at least one pair of population means
D) None of the above
Answer: C Difficulty: Medium Goal: 5
Scrambling: Locked
53. A preliminary study of hourly wages paid to unskilled employees in three metropolitan areas was
conducted. Seven employees were included from Area A, 9 from Area B and 12 from Area C. The test
statistic was computed to be 4.91. What can we conclude at the 0.05 level?
A) Mean hourly wages of unskilled employees all areas are equal
B) Mean hourly wages in at least 2 metropolitan areas are different
C) More degrees of freedom are needed
D) None of these is correct
Answer: B Difficulty: Medium Goal: 5
Scrambling: Locked
54. In ANOVA analysis, when the null hypothesis is rejected, we can find which means are different by
A) constructing confidence intervals.
B) adding another treatment.
C) doing an additional ANOVA.
D) doing a t test.
Answer: A Difficulty: Medium Goal: 6
Fill-in-the-Blank
59. What are the minimum and maximum of values of an F distribution? _______ and _______
Answer: zero and positive infinity Difficulty: Medium Goal: 1
60. What kind of values can the F distribution NOT have? ______________
Answer: negative values Difficulty: Medium Goal: 1
61. When comparing two population variances we use the ___________ distribution.
Answer: F Difficulty: Medium Goal: 1
65. The F-distribution is useful when testing a requirement of two-sample tests of hypothesis. What is
the assumption? ________________
Answer: The population variances are equal Difficulty: Medium Goal: 2
67. ANOVA requires that the populations should be _______, _______, and ______.
Answer: normal or normally distributed; independent, equal standard deviations or variances
Difficulty: Medium Goal: 3
68. What statistical technique is used to test the equality of three or more population means?
____________________
Answer: analysis of variance (ANOVA) Difficulty: Easy Goal: 3
70. In an ANOVA without a block source of variation, what are the degrees of freedom associated with
the error sum of squares? ___________
Answer: n - k Difficulty: Medium Goal: 4
71. ANOVA, how many degrees of freedom are associated with the numerator of the F ratio? _______
Answer: k - 1 or b - 1 or (k - 1 )( b - 1 ) Difficulty: Medium Goal: 4
72. What equals the sum of squares divided by its corresponding degrees of freedom?
_________________
Answer: mean square Difficulty: Hard Goal: 4
74. Assuming that the larger of two variances is in the numerator of an F statistic, in which tail of the F
distribution is the rejection region for analysis of variance? ________
Answer: upper Difficulty: Medium Goal: 4
75. In ANOVA, when we do not reject the null hypothesis, what inference do we make about the
population means? ________________
Answer: they are equal Difficulty: Medium Goal: 5
77. When H0 is rejected in ANOVA, _______ _______ are constructed to identify means that differ.
Answer: confidence intervals Difficulty: Medium Goal: 6
78. When a second treatment is included in the ANOVA analysis without interaction, that treatment is
called a __________________.
Answer: blocking variable Difficulty: Medium Goal: 7
79. How many sources of variation are summarized in a two-way ANOVA table? _________
Answer: three Difficulty: Medium Goal: 7
80. In a two-way ANOVA table, what are the error degrees of freedom? _________
Answer: (k - 1)(b - 1) Difficulty: Medium Goal: 7
81. In a two-way ANOVA with interaction, table, what are the error degrees of freedom? _________
Answer: (n – kb) Difficulty: Hard Goal: 8
82. In a two-way ANOVA with interaction, what are the interaction degrees of freedom? _________
Answer: (k - 1)(b - 1) Difficulty: Hard Goal: 8
83. In a one-way ANOVA, what are the two sources of variation? _________
Answer: treatment and error variation Difficulty: Hard Goal: 5
84. In a two-way ANOVA without interaction, what are the three sources of variation?
Answer: Treatment, Block and error variation Difficulty: Hard Goal: 7
85. In a two-way ANOVA with interaction, what are the four sources of variation? _________
Answer: Factor A, factor B, interaction of factors A and B, error Difficulty: Hard Goal: 8
P ro c ess 1 P ro c e ss 2 P ro c e ss 3 T o ta l
P r o c e s s T o ta ls ( $ 1 0 0 ’s ) 137 108 107 352
S a m p le S iz e 10 10 10 30
S u m o f S q u a re s 1893 1188 1175 4256
91. What are the degrees of freedom for the error sum of squares?
A) 3
B) 10
C) 27
D) 30
Answer: C Difficulty: Medium Goal: 5
Fill-in-the-Blank
97. What are the degrees of freedom for the numerator? ______
Answer: 2 Difficulty: Medium Goal: 4
98. What are the degrees of freedom for the denominator? ______
Answer: 12 Difficulty: Medium Goal: 4
99. If the sum of squares for the brands is 0.07, what is the mean square for brands? ______
Answer: 0.035 Difficulty: Hard Goal: 4
100. If the sum of squares for the error is 0.09, what is the mean square for the error? ______
Answer: 0.0075 Difficulty: Hard Goal: 4
102. What is the calculated value of F if the brand sum of squares is 0.07 and the error sum of squares is
0.09? ______
Answer: 4.66 Difficulty: Hard Goal: 4
104. If the calculated F is 4.74, what would the decision be if = 0.01? _________________
Answer: Do not reject H0 Difficulty: Medium Goal: 5
106. If the sum of squares for the brands is 0.07 and the sum of squares for the error is 0.11, what is the
decision rule at α = 0.05? __________________________
Answer: Do not reject H0 since calculated F = 3.88 and F(0.05) = 3.89 Difficulty: Hard Goal:
5
Multiple Choice
S o u rc e S u m o f S q u a re s df M e a n S q u a re
T re a tm e n ts 1116
E rro r 1068
T o ta l 2184
107. What are the degrees of freedom for the numerator and denominator?
A) 3 and 18
B) 2 and 17
C) 3 and 15
D) 2 and 15
Answer: D Difficulty: Medium Goal: 4
Fill-in-the-Blank
S o u rc e S u m o f S q u a re s df M e a n S q u a re
M a c h in e s 114
O p e ra to rs 215
E rro r 54
T o ta l 383
112. What are the degrees of freedom for the machines? ______
Answer: 3 Difficulty: Medium Goal: 7
113. What are the degrees of freedom for the operators? _____
Answer: 5 Difficulty: Medium Goal: 7
114. What are the degrees of freedom for the errors? _____
Answer: 15 Difficulty: Medium Goal: 7
115. What is the critical value of F for the machine treatment effect at the 1% level of significance? ____
Answer: 5.42 Difficulty: Medium Goal: 7
Essay
122. Using a 1% significance level, what is the decision for the machines?
__________________________
Answer: Do not reject H0; there is no difference in production based on machines
Difficulty: Hard Goal: 7
123. Using a 1% level of significance, what is the decision for the operators?
__________________________
Answer: Do not reject H0; there is no difference in production based on the operators Difficulty:
Hard Goal: 7
Multiple Choice
126. What are the degrees of freedom for the numerator of the F ratio?
A) 8
B) 9
C) 10
D) 18
E) 20
Answer: B Difficulty: Medium Goal: 2
127. What are the degrees of freedom for the denominator of the F ratio?
A) 20
B) 18
C) 10
D) 9
E) 8
Answer: D Difficulty: Medium Goal: 2
H ig h S c h o o l U n d e rg ra d u a te M a s te r ’s D e g r e e
o r L ess D e g re e o r M o re
N u m b e r s a m p le d 7 11 12
M e a n s a la r y ( 1 ,0 0 0 ’s ) 49 7 6 .3 7 8 .3
133. When comparing the mean salaries to test for differences between treatment means, the t statistic is
based on:
A) The treatment degrees of freedom.
B) The total degrees of freedom.
135. Based on the comparison between the mean annual incomes for executives with Undergraduate and
Master's Degree or more,
A) A confidence interval shows that the mean annual incomes are not significantly different.
B) The ANOVA results show that the mean annual incomes are significantly different.
C) A confidence interval shows that the mean annual incomes are significantly different.
D) The ANOVA results show that the mean annual incomes are not significantly different.
Answer: A Difficulty: Medium Goal: 6
136. When comparing the mean annual incomes for executives with a High School education or less and
Undergraduate Degree, the 95% confidence interval shows an interval of 11.7 to 42.7 for the difference.
This result indicates that
A) There is no significant difference between the two incomes.
B) The interval contains a difference of zero.
C) Executives with and Undergraduate Degree earn significantly more than executives with a High
School education or less.
D) Executives with and Undergraduate Degree earn significantly less than executives with a High School
education or less.
Answer: C Difficulty: Hard Goal: 6
Fill-in-the-Blank
137. What are the degrees of freedom for the machines? ______
Answer: 3 Difficulty: Medium Goal: 8
139. What are the degrees of freedom for the interaction? _____
Answer: 6 Difficulty: Medium Goal: 8
140. What are the degrees of freedom for the error? _____
Answer: 24 Difficulty: Medium Goal: 8
141. What is the critical value of F for the machine effect at the 1% level of significance? ____
Answer: 4.72 Difficulty: Medium Goal: 8
142. What is the critical value of F for the operator effect at the 1% level of significance? ____
Answer: 5.61 Difficulty: Medium Goal: 8
143. What is the critical value of F for the interaction effect at the 1% level of significance? ____
Answer: 3.67 Difficulty: Medium Goal: 8
151. Using a 1% significance level, what is the decision for the machines?
__________________________
Answer: Reject H0; there is a difference in production based on machines
Difficulty: Hard Goal: 8
Essay
152. Using a 1% level of significance, what is the decision for the operators?
__________________________
Answer: Reject H0; there is a difference in production based on the operators
Difficulty: Hard Goal: 8
153. Using a 1% level of significance, what is the decision for the interaction?
__________________________
Answer: Reject H0; there is an interaction effect of machine and operator
Difficulty: Hard Goal: 8