Professional Documents
Culture Documents
Button Down Shirt
Button Down Shirt
Button Down Shirt
TECHNOLOGY CHENNAI
ASSIGNMENT – 2
SUBMITTED BY:
VIJITH KUMAR
BFT/18/1170
ACKNOWLEDGEMENT
The success and final outcome of this project required a lot of guidance
and assistance from many people and I am extremely fortunate to have
got this all along the completion of our project work. At this juncture I
feel deeply honoured in expressing my sincere gratitude to my mentor
Mr. T. MURUGAN for his guidance and constant supervision as well as
providing us with the relevant information as and when required to help
us complete the project on time.I am also thankful to the lab assistants
Ms. Lalitha and Mr. Srinivasan, DFT, whose insightful leadership and
knowledge helped us to steer out this work. I would also like to pay our
regards and thanks to the NIFT Institute, Chennai for providing us with
constant and all possible support whenever requested for. Lastly, I thank
all our family members and friends who have been constant source of
support during the preparation of this project work.
CONTENTS
1. INTRODUCTION
2. LINE SKETCH OF GARMENT
3. GARMENT PICTURE
4. STITCHES AND SEAMS USED
5. PATTERNS SKETCH
6. MEASUREMENTS
7. OPERATION BREAK DOWN
8. TRIMS AND ACCESSORIES
9. COSTING
INTRODUCTION
The shirt that I opted for is a kind of shirt that can be worn as casuals. I
took printed material and the experiment turned out to be amazing as its
visually appealing. Buttons, I’ve used it as functional and for visual
significance.
This is a casual full sleeve button down shirt . I’ve only used single
fabric for the shirt. I haven’t given any lining for the shirt. The placket
used in this shirt is self placket.
LINE SKETCH
Front View
Back View
FINAL GARMENT
Front View
Back View
STITCHES AND SEAMS USED
TECHNICAL SPECIFICATION:
SEAM USED –
SUPER IMPOSED SEAM (PLAIN SEAM)
STITCH USED –
CLASS 300 (SINGLE NEEDLE LOCKSTITCH)
CLASS 504 (THREE THREAD OVERLOCK)
GARMENT –
NOTCH COLLARED KIMONO SLEEVED SHIRT
MACHINE –
SINGLE NEEDLE LOCKSTITCH MACHINE
THREE THREAD OVERLOCK MACHINE
NEEDLES USED -
DB X 14
THREAD –
3 PLY SPUN POLYESTER THREAD
PATTERNS SKETCH
SPECIFICATION SHEET
DESCRIPTION MEASUREMENTS IN INCHES
FRONT LENGTH 30
SIDE LENGTH 18
CHEST WIDTH 24
ACROSS SHOULDER 19
BOTTOM OPENING 24
CB LENGTH 31.5
CF LENGTH 30.5
BACK WIDTH 24
BACK LENGTH FROM HPS 32
YOKE WIDTH 6.5
YOKE LENGTH 19.5
OPERATION SEQUENCE
Material Used :
Printed Cotton Fabric
Trims Used :
White Buttons