Professional Documents
Culture Documents
Materials System Specification
Materials System Specification
Contents
1 General Scope .................................................. 2
2 Conflicts and Deviations ................................... 2
3 References........................................................ 2
4 Oils .................................................................... 3
5 Qualification ...................................................... 3
6 Identification ...................................................... 3
Revision Summary................................................... 4
1 General Scope
This specification describes the requirements for different types of automotive gear oils.
Any conflicts between this document and other applicable Mandatory Saudi Aramco
Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.
Any deviation from the requirements herein shall follow internal company procedure
SAEP-302.
3 References
Material or equipment supplied to this specification shall comply with the latest edition
of the references listed below, unless otherwise noted.
4 Oils
4.1.1 Scope
4.1.2 Requirements
4.2.1 Scope
4.2.2 Requirements
5 Qualification
The supplier shall provide evidence of qualification as stipulated above together with a
1-liter sample against which all supplies of the respective product must comply within
industry accepted tolerances. Initial qualification and any subsequent formulation
changes must be approved by the Responsible Standardization Agency.
6 Identification
Saudi Aramco Automotive Gear Lube 90, Material Master Number 1000172969 or
1000173002
Commentary Note:
Revision Summary
22 November 2017 New Saudi Aramco Materials System Specification that describes the requirements for
different types of automotive gear oils.