This document provides 9 steps for isolating a loop device using an MX Basic Operation Online Training Simulation: 1) Select the Isolate Menu option from the Main Menu, 2) Choose the Point option, 3) Select the Loop Point option, 4) Use arrow keys to select the loop, 5) Move the cursor to highlight the device, 6) Enter the device address, 7) Press Enter, 8) Select the Isolate option, 9) The number of isolations is now displayed. The user IDs and passcodes in this guide are examples only.
This document provides 9 steps for isolating a loop device using an MX Basic Operation Online Training Simulation: 1) Select the Isolate Menu option from the Main Menu, 2) Choose the Point option, 3) Select the Loop Point option, 4) Use arrow keys to select the loop, 5) Move the cursor to highlight the device, 6) Enter the device address, 7) Press Enter, 8) Select the Isolate option, 9) The number of isolations is now displayed. The user IDs and passcodes in this guide are examples only.
This document provides 9 steps for isolating a loop device using an MX Basic Operation Online Training Simulation: 1) Select the Isolate Menu option from the Main Menu, 2) Choose the Point option, 3) Select the Loop Point option, 4) Use arrow keys to select the loop, 5) Move the cursor to highlight the device, 6) Enter the device address, 7) Press Enter, 8) Select the Isolate option, 9) The number of isolations is now displayed. The user IDs and passcodes in this guide are examples only.
MX Basic Operation Online Training Simulation Steps
Isolate a Loop Device
1. To enter the Isolate Menu, select “3” (Isolate/De-Isolate) from the Main Menu. The nine options are displayed on the LCD. 2. For Loop Devices, select “1” (Point) as shown on the LCD from the keypad. 3. Select Option “1” (Loop Point) as shown on the LCD using the keypad. 4. Use the F4/F3 (+/-) keys to select the Loop: press F4, then F3. 5. Now move the cursor by pressing F2 once to highlight the loop device. 6. Using the keypad, enter the device address: 64. 7. Press Enter (F5). The device is now displayed. 8. Select “1” (Isolate) as shown on the LCD, using the alphanumeric keypad, to isolate. 9. The number of isolations is now shown in the General window on the LCD display.
Note: the user IDs and passcodes noted in these job aids are for example only.