Professional Documents
Culture Documents
Vibration Isolation and Seismic Restraints: R A. Mojica and Partners April 2015 R. A. Mojica and Partners
Vibration Isolation and Seismic Restraints: R A. Mojica and Partners April 2015 R. A. Mojica and Partners
Vibration Isolation and Seismic Restraints: R A. Mojica and Partners April 2015 R. A. Mojica and Partners
Part 2 - PRODUCTS:
1.2 QUALITY ASSURANCE :
2.1 ACCEPTABLE MANUFACTURERS : a. Vibration isolators and seismic restraints shall be of the same
manufacturer.
a. Amber-Booth .
b. Mason Industries.
b. Seismic restraint external force acceleration criteria shall be 1.0
C. Vibration Eliminator Co.
G for life safety equipment (emergency power system, fire alarm
d. Vibration Mounting & Controls, Inc.
system, and equipment connected to the emergency power
e. Vibrex Vibration Control Systems.
system). External force acceleration criteria shall be 0.5 G for
non-life safety equipment.
2.2 VIBRATION ISOLATION AND SIESMIC RESTRAINTS:
1.3 STANDARDS :
a. General.
1. Devices installed outdoors shall be weatherproof; steel a. SMACNA Guidelines for Restraint of Mechanical Equipment.
components shall be hot-dipped galvanized, hardware
shall be cadmium plated, and springs shall be neoprene b. Requirements for UBC Seismic Zone 4.
coated.
2. Spring diameters shall be no less than 0.8 of the 1.4 SUBMITT ALS :
compressed height of the spring at rated load.
a. Manufacturer's product data sheets and installation instruction
for each vibration isolator and seismic restraint.
R. A. MOJICA and PARTNERS April 2015 R. A. MOJICA and PARTNERS April 2015
Pro oo P.rl Urh;:mhivP. t thA P;::1lm.c: Prnnm::P.rl I Jrh;mhivA ;::1t th P::almc: C:::o .-.tin n ') t::._n .c;;_,11 Q
C::::o .-. t i ........') a;_n .c;;_,1g
Part 3 - EXECUTION:
Ii\ 3.
Ii\
Springs shall have an additional minimum travel to solid
equal to 50% of the rated deflection.
a. Installation shall be in accordance with seismic restraint 1. Floor mounted captive spring isolators for seismic and
calculations and manufacturer's installation instructions. restrained service.
b. Verify that mounting methods provide the required vibration 2. . Snubbing shall take place in all modes with
isolation and seismic restraint and that there are no vibration short adjustment to limit upward, downward, and horizontal
circuits. travel to a maximum of 6mm before contacting
snubbers.
C. Conduit connected to rotating or vibrating equipment shall be
flexible metal conduit or liquid tight flexible conduit. 3. Leveling bolts for rigid bolting to equipment.
1. Floor-mounted pads.
3. Bolt holes.
R. A. MOJICA and PARTNERS Prono !=.Arl I Jrh;mhivA .:.t thP. P::.lm April 2015
,:,,rtinn ?i:::_n c;:_,t A R. A. MOJICA April 2015
and PARTNERS C!o .-.tin n ') t:.:_n i:;,_ ,t Q
Prnnn Arl I
Jrh;:inhivP ::it th,:,,
P::1lmc::.