Professional Documents
Culture Documents
Specifications: 3516C HD Marine Engine
Specifications: 3516C HD Marine Engine
Specifications: 3516C HD Marine Engine
2525 bkW
MARINE ENGINE 1800 rpm
SHIP-ASSIST TUGS/YACHTS/PATROL CRAFT/MILITARY
SPECIFICATIONS
V-16, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant
Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170.0 mm (6.7 in)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215.0 mm (8.5 in)
Displacement . . . . . . . . . . . . . . . . . . . . . . . . 78.1 L (4766 in3)
Rotation (from flywheel end) . . . . . . . . . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7:1
Capacity for Liquids
Cooling System (engine only). . . . . 233.4 L (61.6 gal)
Lube Oil System (refill) . . . . . . . . . . . . . . 204 L (53 gal)
Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 hr
Minimum Lube Oil Grade (required) . . . . . . . . . . . . . . CH-4
Image is a Weight, Net Dry
representation only. (LW configuration approx) . . . . . . . . 7878 kg (17,370 lb)
(Comm configuration approx) . . . . . 8745 kg (19,280 lb)
STANDARD ENGINE EQUIPMENT
Air Inlet System Mounting System
Corrosion-resistant separate circuit aftercooler core, Three point trunnion mounts or mounting rails
power-core air cleaners with service indicator, dual
Power Take-Offs
turbochargers
Accessory drives — lower RH and lower LH for standard
Cooling System rotation; upper and lower RH, upper and lower LH for
Both combined and separate circuit options — auxiliary opposite rotation; two-sided front housing
fresh water pump, centrifugal non-self-priming auxiliary
Protection System
sea water pump, gear driven centrifugal jacket water
A3 engine control module with customer programmable
pump, expansion tank, engine oil cooler, thermostats
engine derate strategies, engine alarms and diagnostics
and housing
displayed on local and remote MPDs, emergency stop
Control System pushbutton, safety shutoff protection for oil pressure and
Dual A3 engine control modules provide engine control water temperature, overspeed protection
and monitoring, rigid wiring harness with plug and run
Standard Lightweight (LW) Configuration
connectors on port and starboard sides
250-hour oil pan, trunnion mounts, high performance
Exhaust System cooling pipe, engine-mounted SW pump and heat
Dry gas tight exhaust manifolds with SOLAS compliant exchanger
heat shields, dual turbochargers with water-cooled
Optional Commercial (COMM) Configuration
bearings and heat shields, wastegate, modular pulse
1000-hour oil pan, mounting rails, expansion tank,
exhaust manifold, single exhaust outlet
engine-mounted SW pump and heat exchanger
Fuel System
General
Electronically controlled unit injectors, fuel filter with
Vibration damper and guard, Caterpillar® yellow paint,
service indicators, fuel transfer pump, SOLAS compliant
lifting eyes
fuel connections with spill shield
Factory-designed systems built at Caterpillar
Instrumentation
ISO 9001:2000 certified facilities.
Engine-mounted instrument panel with Marine Power
Display (MPD), four-position engine control switch, alarm
horn, overspeed shutdown notification light, emergency COMMON OPTIONAL EQUIPMENT
stop notification light, secondary ECM “Ready” light,
secondary ECM “Active” light, graphic display unit for • Pilot house panel with Marine Power Display (MPD),
analog or digital display of oil and fuel pressure, oil and remote start/stop, E-stop, alarm display, override
fuel filter differential, system DC voltage, exhaust and • Cat® engine-mounted plate-type heat exchanger with
water temperature, air inlet restriction, service meter, integrated fuel cooler
engine speed, fuel consumption (total and instantaneous) • Gateway for modbus/ethernet communications
Lube System • Individual cylinder exhaust temperature scanner
Pre-lube strategy, top-mounted dual crankcase • Local speed control
breathers, oil filter with service indicators, oil level gauge, • High capacity engine-mounted SW pumps
oil filler, gear-type oil pump
• Spare parts kit
• Vertical or horizontal exhaust connections
• Engine-mounted electric pre-lube pump
LEHM5034-02 Page 1 of 4
3516C HD MARINE ENGINE
3435 mhp/2525 bkW @ 1800 rpm
2600
2500
ZONE 4
2400
2200
1 ZONE 3
2
2000 3
ZONE 2
1800
4
Power - bkW
1600
ZONE 1
1400
1200
1000
800
600
400
200
P
0
600 800 1000 1200 1400 1600 1800 2000 2200 2400
Engine Speed - rpm
Zone 1 — Continuous operation allowed without interruption or load Zone 4 — Operation in Zone 4 is limited to no more than 16% of the total
cycling. operating hours.
Zone 2 — Operation is permitted for periods up to four hours, followed by
a one-hour period at a combination of power and speed in Zone 1.
Zone 3 — Operation is permitted for periods up to one hour, followed by a
one-hour period at combinations of power and speed in Zone 1.
LEHM5034-02 Page 2 of 4
3516C HD MARINE ENGINE
3435 mhp/2525 bkW @ 1800 rpm
DIMENSIONS
03
03
L W
01 01 01
03
03
Engine Dimensions
Width 2232 mm 88 in
Height 2065 mm 81 in
LEHM5034-02 Page 3 of 4
3516C HD MARINE ENGINE
3435 mph/2525 bkW @ 1800 rpm
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and operating
conditions beyond Caterpillar’s control.
Power produced at the flywheel will be within standard tolerances up to 50°C (122°F) combustion air temperature measured at the air cleaner inlet, and fuel
temperature up to 52°C (125°F) measured at the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft
power by 3% for propeller shaft power.
CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar
and may not be used without permission.
©2005 Caterpillar
U.S. Sourced All rights reserved.
LEHM5034-02 (8-05) Materials and specifications are subject to change without notice.
The International System of Units (SI) is used in this publication.